REPAIR TO FLOORING ,JOINERY, ROOF SHEET, FALSE CEILING INCL CONNECTED B AND R INCL CONNECTED INTERNAL ELECTRIFICATION WORKS TO CERTAIN OTM AND MARRIED ACCN AT MIL STN KASAULI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge.

Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

S & F for Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified.

S & F plain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed

Supply and fixing for fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. complete all as specified and directed.

Dismantling wall as ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/kitchen cup board, any thickness, including cover fillets

S&F GI metal suspended ceiling system, GI lay in plain of 600x600x0.5mm (TEGULAR) edge tiles in globel white colour to be laid on strong 24mm Tee section flanges colour white having roatary stiching on the main runner with web height of 38mm complete all as specified and directed Note- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mmx600mm module. Cut cross tees longer than 600mm required independent support. 600mmx600mm module to be found by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres. (ii) The HCL sleeve anchor fastnor of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x37x25x1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete all as specified and as directed.

Dismantling timber scantling un framed work 40 sq cm and over in section in any position, unframed work complete all as spd.

M & L 2nd class HW clean Sawn timber scantling/posts complete all as specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Non skid ceramic coloured tiles 7mm to 8mm thick (squre/rectangular) area of each tile exc0.11sqm but not exc 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:4 complete all as specified.

M &L for Glazed ceramic coloured tiles 450X300X7mm thick,laid in vertical surfaces, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

M& L for Virified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15 mm thick screed bed 1:6 complete all as specified.

All the same as per here-in-above but vitrified tiles of size on vertical surfaces such as skirting set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. rendering 15mm thick in C.M 1:3 on brick work or concrete surfaces etc. complete all as specified & as directed

S & F as in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white including fixing bolts, Plastic seat & cover complete all as specified and as directed .

S&F10 ltr capacity PVC valveless syphonic action type flusing cistern low level white with inlet ball valve float and handle including bracket fixed in repair

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 15mm bore.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 20 mm bore.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs.etc complete all as specified.

S&F in repair 100 mm dia PVC(SWR) 'P' trap including jointing with solvent cement etc complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exe 4.0 Sqm each .

Taking down shutter of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified.

Supplied and Fixed IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

Supply and Fixing 35mm thick, 2nd class HW, Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed .

Supply and Fixing IInd Class HW 35mm thick, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified.

Supply and Fixing 30mm thick 2nd class hardwood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and as directed .

S &F Powder Coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F anodised aluminium powder coated (Powder coating shall be 50 micron minimum thickness) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No) suitable handle (1 No) compete all as specified (Note : Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately )

S &F Powder Coated Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified

S & F anodised aluminium powder coating of any colour (thickness of powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, hinges anodised aluminum snap beading screws etc, complete all as specified. (Note : S&F of Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately under this Sch).

Supply and Fixing for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed .

S&F in repair 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed

S & F in reapir for Aluminium anodized 200mm long barrel tower bolt of extruded section and fixed.

M&L for sheet glass 5.5mm thick tinted fixed to aluminium frame work with necessary rubber gasket/aluminium beeding area of each pane not exc 1 Sqm complete all as specificed and directed by Engr-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

M & L for sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

M&L for 4mm figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed by the Engineer-in-Charge

Dismantling water tanks and removing to the store capacity exc 500 Ltrs and n exc 1000 ltrs complete all as specified and directed by the Engr-in-Charge

S&F 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by the Engineer-in-Charge

Dismantling water tanks and removing to the store capacity exc 250 Ltrs and n exc 500 ltrs complete all as specified and directed by the Engr-in-Charge

M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by the Engr-in-Charge

Supply & fixing pre-laminated particle board 19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber / steel frame work as in shelves or shutters or wall panelling, fixed as in repairs complete all as specified and directed.

Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair including taking out the existing complete all as specified and directed

Supply & fixing magnetic catches 100 mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed.

Material & labour for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified & directed.

Taking down cement plaster on brick/stone/concrete wall surface in any position complete all as specified and directed.

M/L rendering 15mm thick on fair faces of brick or concrete surface in CM 1:4 finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for preparation of Newly plastered surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint (1st quality) with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) over one coat of primer complete all as specified and as directed

M&L rendeing 10mm thick other then fair faces surfaces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces)

M/L preparatin of new / previously untreated surface & applying two coats of oil bound distemper (OBD) over one coat of chalk white complete all as specified and directred

Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed.

Material & Labour brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified & directed.

M & L for Rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces/stone work incl finishing surface w/o using extra cement complete all as specified and as directed by the Engineer-in-Charge

M&L in repairs for PVC tiles / sheets1.5 mm thick laminated plain coloured, marbled mosaic or motled finish, laid with approved rubber based adhesive in floors incl taking down old sheet all as specified.

S&F in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms).

S&F in repair 15mm bore angle cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms).

S & F in repairs swan neck Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs, complete all as specified.

S & F as in repair Vitreous China pedestal wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed .

S&F in repair of Mixer 15 mm dia Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

S&F in repair of Mixer 15 mm dia Brass CP mixer for WHB/sink mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

S & F in repair of 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.

M & L 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified

M & L 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and incl necessary clamping complete all as specified

S & F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed .

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified

S & F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed .

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S & F in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed .

M & L Coloured Prepolished chequered cement conc tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified.

Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L PCC 75mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring all as specified and directed.

S&F 150mm Aluminium handles, cast type, anodised, fixed complete all as specified.

S&F 100mm Aluminium handles, cast type, anodised, fixed complete all as specified.

Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fixing for stainless steel butt hinge ISI Marked 75mm size complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded premale PVC sheet on the front face & 4mm thick prelam PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed by Engineer-in-Charge.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC casing -n-caping of any size/dia, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :-

One light /Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.

One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.

One two way point controlled by two, two way switches 06 Amps complete all as specified and directed.

All as per serial item No 82.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed.

All as per serial item No 82.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed.

Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :-

One light / Exhaust fan point controlled by one, one way switch 06 Amps complete all as specified and directed.

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.

One 3 pin,06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.

All as per serial item No 85.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed.

All as per serial item No 85.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed.

Supply & fixing switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

Supply & fixing switch piano flush type,16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

Supply & fixing of socket outlet 3 pin, 06 Amps and 3 pin16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge

Supply and fixing bell push flush type , 06 amps , 240 volts all as directed by Engr-in-Charge

Supply and fixing door bell ding dong type , 240 volts AC

Supply & fixing switch piano flush type, 06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge

Supply & fixing in repairs LED mirror light 10W including rod complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repairs of 9/10 W LED bulk head luminairies incl LED light with clear prismatic diffuser,driver holder connecting up with three core flexible copper conductor cable of suitable size including all acessories for fixing on wall all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs wall mounted decorative fancy light fitting stylo (Round) suitable for 14 watts LED lamp including provision of fixing on wall with all items required for fixing all as specified and directed by Engr-in-Charge

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge.

Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + 01 single core cable of 2.5 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note 3 RUN measured as 1 RUN)

-Ditto- all as per item No 100.00 above, but by using two single core cable of 6 Sqmm for Phase and neutral + 1 single core cable of 4 Sqmm for earth wire complete all as specified & directed.(Note 3 RUN measured as 1 RUN)

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

-Ditto- all as per item No 103.00, but of size 08 way SPN.

-Ditto- all as per item No 103.00, but of size 12 way SPN.

S & F in repairs MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections with suitable thimble complete all as specified & directed.

S & F in repairs MCB, DP (Double Pole), AC, 240 volts, B series capacity 20 Amps to 32 Amps 10kA and making connections with suitable thimble complete all as specified & directed.

S & F in repairsMCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections with suitable thimble complete all as specified & directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision of four pole 100 Amp isolator and MCBs of cap 20 to 40 Amps as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

S & F in repairs Isolator 4 Pole 'C' series 100 amps capacity AC 415 V,10kA complete all as specified and directed.

S & F in repairs Isolator 4 Pole 'C' series 63 amps capacity AC 415 V,10kA complete all as specified and directed.

M & L for taking down the unsv geyser of 25/ 50 ltr capacities from the site after disconnecting the water connection, electric connection, opening the geyser assembly and descalling the deposits in the inner container and outlet water pipe set complete all as directed by Engineer-in-Charge. (Note:- Replacement of unsv bolts, rubber real, ring nuts, washers to be included in the rate quoted by tenderer. Material & labour for GI fittings and other connected works shall be measured and paid for separately under respective items of schedule ‘A’ here in after) :-

Supply & fix in repair of geyser syphon assembly steel plate with nuts and bolts, washers, clamps and rubber ring any Make of geyser, for 25/50 ltr capacity of Geysers.

Supply & fix in repair of thermostatic switch 11 " long ISI marked complete with electric connection suitable for geyser any Make complete all as specified and directed.

Supply & fix in repair of geyser element 1.5 /2.0 KW capacity with rubber ring Round/triangular type complete with clamps, nuts and bolts washers etc for geysers ISI marked (any Make) complete all as specified and directed.

Supply and fix Non return valve 15mm dia made of bronze ISI marked heavy duty fixed in repairs complete all as directed by Engineer-in-Charge.

Supply & fix (in repairs) 15mm dia PVC connection 450 mm long , suitable for hot water supply ,complete with 2 Nos brass nuts complete all as specified and directed.

Supply & fix (in repairs) 15mm dia PVC connection 450 mm long , suitable for cold water supply ,complete with 2 Nos brass nuts complete all as specified and directed.

Supply & fix in repairs of Zebra fastner of size 12x100 mm complete all as specified and directed .

S&F in Replacement Exhaust Fan 250mm plastic body , 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed

S&F in Replacement Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed.

S&F self ballasted LED Retrofit Bulb 5 Star Bulbs 12 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

Supply & fixing in repair/replacement to existing tube light fitting of any capacity with LED tube light fitting 18/20W, (single Side Connection) including LED Rod including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair/replacement to existing light fitting of any capacity with recess/surface/suspended mounting 36W Ultra modern designed architectural 2x2 LED luminaire which provides soft-light and glare free symmetrical illumination, including all ace ssories for fixing in fall ceiling/ceiling/in hanging position all as specified and directed by Engr-in-Charge.

Supply and fix in replacement to existing lamp of any capacity with LED lamp 9/10 watt complete all as specified and directed.

Supply and fix in replacement to existing post top light fitting with LED 20 watt post top light fitting AC outdoor type with decorative post top for 360 degree indirect light IP-65 protection with impact and corrosion resistant complete with driver and 20 watt LED lamp all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED driver for recess/surface/suspended mounting 36W Ultra modern designed architectural 2'x2' LED luminaire which provides soft-light and glare free symmetrical illumination, all as specified and directed by Engr-in-Charge.

S & F in repair/replacement of PVC gang box suitable for 6 Amp Socket and 6 Amp switch complete all as per specified and directed

S & F in repair/replacement of PVC gang box suitable for 16 Amp Socket and 16 Amp switch complete all as per specified and directed

S & F Recess mounting ceiling fitting 1'X1' LED 18/20 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make/ size complete all as specified and as directed (As per existing sample).

S & F in replacement PVC Plug Top 6 amps complete all as specified and as directed.

S & F in replacement PVC Plug Top 16 amps complete all as specified and as directed.

S & F in replacement industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

Supply and fix in repair modular socket 16 A, 6 pin,complete all as specified & directed by Engr-in-Charge

Supply and fix in repair modular socket 03 pin 06 A, complete all as specified & directed by Engr-in-Charge

Supply and fix in repair modular switch 16 A, complete all as specified & directed by Engr-in-Charge

Supply and fix in repair modular switch 06 A, complete all as specified & directed by Engr-in-Charge

Amount of credit of Rs. 186092.36 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

M/S CHOPRA & COMPANY

R. P. Suppliers and Construction Co.

R B TRADERS

Vinod Kumar Aggarwal

Durga Construction

Varindera And Varindera Construction