CWE/HSR-31 OF 2023-24

Amount

Taking down chain link/ steel barbed wire fencing all as specified and as directed by Engr-in-Chrge.

Dismantling posts or struts embedded in Concrete, brick work,masonry, etc. (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exe 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil all as specified and as directed by Engr-in-Charge.

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

M & L PCC 1:3:6 using type -C1, 20mm graded stone aggregate as in mud stops edges round or chamfered all as specified and directed

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding, drilling, bolting etc where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290).

S&F 5 to 10mm diameter of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5 to 10cm long complete all as specified and as directed by Engr-in-Charge.

S&F mild steel galvanized chain link fencing including line wires, 50 x 50 mm mesh size made out of 4.0 mm GI wire. including provision of binding wire all as directed by Engr-in-Charge and approved by Garrison Engineer

S&F galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc as directed.

M&L for mild steel round bars 10mm dia and over cut to length, bent to shap required including cranking, bending spirally for hooping for as in line wire for straining fencing and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Chrge.

M&L preparation of new steel surfaces of any description over 10cm in width or grith and applying two coats of synthetic enamel (ordinary tint) over a coat of red oxide chrome complete all as specified and as directed by Engr-In-charg.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-Charge.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:6 complete all as specified and as directed.

All as per item No. 14 above but except bricks complete all as specified and as directed by Engr-in-Chrge.

M&L for flush pointing to brick walls in CM 1:4

Taking down cement plaster on brick or stone walls,etc.including raking out joints ,hacking for key , scrubbing down with water,etc complete all as specified and as directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:4 on brick or pcc block masonry/concrete surface to be finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new untreated surfaces of walls and applying two coats of cement base paint complete all as specified and as directed by Engr-in-charge.

Demolition of cement Concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

M&L for PCC type "C2" 1:3:6 (using 20 mm gradded stone aggregate)as in area drainage, side wall/surface channel complete all as specified and as directed by Engr-in-Charge.

Extra for forming fair finish to existing drain or channel 30cm inner girth in cement concrete using extra cement including for forms moulds, mitered/stopped ends etc complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping and the like including necessary form work weathering rounded or chamfered angles, throating including finishing the surface even and smooth without using extra cement

Dismantling of Stone/concrete slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar

M&L Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set and jointed and pointed in neat cement slurry with grey cement and pigment with 20mm thick screed bed or bedding layer in cement 1:6 in floors all as specified and as directed by Engr-in-Charge.

M&L Machine pressed precast concrete rubber moulded coloured interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 Grade in floors/path/parking complete all as specified and as directed.

M& L for 75 mm thick PCC flooring 1:4:8 Type D-2 (using 40mm graded crushed stone aggregate)/brick coarse aggregate as in / subbase of floor finishes complete all as specified and as directed by the Engineer-in-charge.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by engineer in charge

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

M&L preparation of new concrete/ brick/ stone surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of priming paint plaster all as specified and as directed by eng in charge

M&L preparation of old painted concrete/ brick/ stone surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed by engr in charge

M/S KAVITA CONSTRUCTION

PRINCE CONSTRUCTION