SPECIAL REPAIR TO BLDG NO WB-194 (SINGLE OFFR ACCN) AIR FD AREA OF MCTE UNDER GE (MCTE), MHOW

Amount

Demolition of cement concrete (in ground floor and pavings etc) (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

Demolition of cement concrete (other than ground floor) of any description and in any position not otherwise specifically provided for complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles .

Demolition of kota stone/ stone in floor laid, bedded and pointed in any mortar

Taking down chowkats or frames with shutters (without taking of shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking of shutters from frames) area exceeding 1.50 sqm and not exc 4 Sqm each complete all as specified

Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

Demolition of Brickwork of stone/ boulder masonry, build in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for cement concrete 25mm thick type B-1, 1:2:4 (20mm graded aggregate) as in flooring etc complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick in Plain cement concrete type C1 (1:3:6) (using 20mm graded aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape as reqd, including cranking, bending srirally for hooping for columns, hooking ends binding with and including MS (annealed) wire not less than 0.9mm dia or securing with clips all as specified.

M&L for 10mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified

M&L for 15mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note : Water Proofing compound shall be measured and paid for separately)

M&L for 5mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. in ceiling finished even and smooth without using extra cement, all as specified.

Complete removal of existing treatment of any description, including prepration of surfaces, on wall surfaces of any description complete all as specified.

M&L for applying birla white wall care putty 1 to 2mm thick, in two layers on wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified.

M&L for two coats of distemper oil emulsion (OBD) over a coat of primer on wall surface of any description including preparation of surfaces complete all as specified.

M&L for two coats of distemper oil emulsion (OBD) over a coat of primer in ceiling surface of any description including preparation of surfaces complete all as specified.

M&L for preparation of plastered Surfaces and applying two Coats of acrylic exterior grade oil base emulsion paint (anti fungal) over a coat of primer on Walls complete all as specified and as directed.

Preparing new surfaces and applying three coats of white wash in ceiling complete all as specified.

Preparing old surfaces and applying two coats of white wash in ceiling complete all as specified.

M&L for glazed ceramic coloured tiles of size not less than 300mm x 450mm and 7 to 8mm thick as on vertical surfaces such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (squqare/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (squqare/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified

M&L for scratch free, doubly charged, vitrified ceramic tiles 9 to 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

All as per item No.28 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for machine cut kota stone slab 18-20mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete.

All as per item No.30 above but in riser of steps, skirting, dado and pillar laid over and including cement plaster 10mm thick in CM 1: 4 complete.

Polishing of old kota stone slab with bees wax polish including one coat grinding including rounding to edges of stone slabs edges as required, such as in steps etc. complete all as specified and as dirrected by Engr-in-Charge.

M&L for preparation of old wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint, complete all as specified.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint, complete all as specified.

Providing and fixing pre painted steel sliding windows Eco Series 3-Track, 2 glass panel and 01 SS mesh panel sliding window including grill fabricated from Roll formed sections made of galvanized Steel colour coated/ powder coated (Base Steel as paer IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 Gm/Sqm) with total coated thickness of 0.58mm. Primer coat with epoxy primer 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 micron thick. Section for external frame should be of 107 x 44mm, section for shutter should 35 x 49mm. Section of mesh should be of 35 x 49mm. The windows should be paneled with 4mm thick plain clear glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM). The sections to length, joined and assembled by means of corner bracket. The above frames should fixed to the concrete/ masonry walls by means of self expanding screws, including supply and fixing of MS grill 10mm solid square bare @ 150mm centre to centre for horizontal direction and two 10mm solid square bare in vertical direction alongwith all-round the frame using 30mm x 3mm MS flat with necessary welding and fixing anchorage and making good the adjacent sides of jambs of windows i.e, plastering in CM 1:4 complete all as specified and directed. Make : NCL or equivalent.

Providing and fixing of double rebate openable/ fixed windows made of galvanized steel colour coated/ powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55mm, centre mullion section 72 x 50mm, shutter section 47 x 20mm,fly mesh section 40 x 20mm and the fixed glass beading section 12 x 12mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/ masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6 x 12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.

Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/ powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws incl window glass 4mm thick & making good the adjacent sides of jambs of ventilators by plastering in CM (1:4) complete all as specified and directed by Engr-in-Charge.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

All as per item No.38 above but old tube fixing only.

S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

All as per item No.40 above but old tube fixing only.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete.

Supply & Fixed in repair Wash basins, Vitreous China (flat back or angle back type) size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets & including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.

S&Fixed in repair PVC valveless, syphonic action type flushing cistern 10 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets

S & F in repair bib taps fancy type, brass, chromium plated with crutch or butterfly handle, screwed down, screwed for 15mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S & F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S & F in repairs Toilet Paper Holder Stainless Steel fixed to wall al as specifed and directed by Engr-in-Charge. Make.

S & F in reparis Stainless Steel Wall Mount Case with Soap Holder & Brush Holder fixed to wall all as specified and directed by Engr-in-Charge.

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provision for both hand shower and overhead shower complete with wall flange (excluding hand & over head Shower) screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S & F in repairs Hand shower including 1.5 m CP Flexible SS Tube, 5 flow Hand Shower, adjustable wall hook, rubbit cleaning system all as specified and directed.

S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwed down for 15mm bore GI pipe complete all as specifed and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, including 1.25 m Long CP Flexible Tube & ABS Wall Hook.

S & F in reparis Flexible waste pipe for wash hand basin fittled to Wash Hand Basin incl all necessary brackets etc all as specifed and directed by Engr-in-Charge.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm

S&F in repair Waste coupling, 32mm bore, of PTMT (half or full threaded). (Minimum weight 32mm - 45gms/ 40mm - 60gms)complete all as specified.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F bathroom mirror cabinet plastic body white coloured, wall mounted of size 47.40cm x 37.60cm x 19.20cm, minimum wt 3.20 Kg, rectangular shaped complete all as specified and directed.

S&F in repair Nipple 20mm dia suitable for HDPE water tank. (Minimum weight 20mm - 45gms)

S&F in repair Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20mm bore and fixed in repairs, all as specified and directed

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210gms )

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

S&F in repair PVC (SWR) bends suitable for 75mm external dia complete all as specified

S&F repair PVC (SWR) Tee single socketed suitable for 75mm external dia complete all as specified

S&F in repair PVC (SWR) gully trap 125/ 110mm, setting and jointing with solvent cement complete all as specified and directed

S&F in repair PVC(SWR) pipes, 75mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/ clips complete all as specified.

S&F in repair PVC(SWR) bends suitable for 110mm external dia complete all as specified

S&F in repair PVC(SWR) Tee single socked suitable for 110mm external dia complete all as specified

S&F in repair PVC (SWR) pipes, 110mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/ clips complete all as specified.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4)

Supply only integral liquid water proofing compound (Makes : Pidilite Industries/ Impermo/ Snowcem India Ltd/ Sika

S&F in repair Grating 125mm dia of CP with or without hole complete all as specified and directed.

M&L for PCC type D-2 (1:4:8), using 40mm graded stone aggregates as in sub base filling & mass concrete, complete all as specified.

S&F in repair decorative curtain rod 25 dia with decorative head on both end of rod and necessary clamps/ fixing brackets, stops, rollers etc complete all as specified and as directed.

M&L for taking down/dismantling of existing roof treatment of any description old APP membrance etc terracing including screed bed etc. Hessian base felt/ tar felt etc. (any type and thickness) complete and removing the materials from site to a distance exc 250 Mtr but not exc 500mtr all as specified & directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and as directed.

M&L for cement concrete 25mm thick type B-1, 1:2:4 (12.5mm graded aggregate) as in roof top etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in cement mortar 1:4 on roof surface including mixed with WPC as per manufacturer's instruction's and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respective item of Sch 'A'.

Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness testing complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/ Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membran of 3Kg/ Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed. (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface. Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer as approved by GE.

S&F Cast iron soil, sand cast, waste pipe and vent pipe in any length with or wihtout ears, with cement joints, fixed to walls, 100mm external dia, complete all as specified.

All as per item No.83 above but 75mm dia.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl edge of concrete, rough finished surfaces.

M&L for preparation and applying three coats of white wash on new wall complete all as specified.

M&L for applying three coats of white wash on old wall surfaces complete all as specified.

M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed :- (a) Provide PCC 1 : 1.5 : 3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement. (b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion.(c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete. on complete sunken surfaces of floor & wall and provide necessary connections to soil/ waste pipe from WC/ nahani trap etc including demolation of old sunken complete all as specified and as directed. (d) applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately). (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. (Note:- Floor Area shall be measured for payment). including 10 years guarantee and testing

M & L for provide GI spout pipe, med grade of 40mm bore as in sunken floor complete all specified and directed.

M & L for cutting holes in brick walls built in cement mortor at the starting point of down take soil/ waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggt with wall finish at the disturbed portion of external surfaces complete as directed and specified.

M&L for plain cement concrete 1:4:8 mix, type D-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.

Providing and fixing SS railing of height 1.00 mtr at various locations with SS pipe of grade 304, top hand rail of 50mm and 1.5mm thick and fixed on square balustar of 48mm x 48mm x 1.5mm to be fixed at spacing not more than 1200mm, 3 Nos of horizontal members of 20mm dia, 1.50mm thick fixed with D button on balusrtar includding bottom flange of 75mm x 75mm complete all as specified and directed by Engr-in-Charge (Note :- All Cutting, welding, dirlling holes in existing floor and welding ends on existing RCC is included).

Providing and fixing SS railing of height 0.20 mtr at various locations with SS pipe of grade 316, top hand rail of 50mm and 1.5mm thick and fixed on square balustar of 20mm x 20mm x 1.5mm to be fixed at spacing not more than 1200mm, fixed with MS bolts grouted in RCC members with epoxy chemical and fixed with 40 x 40mm square flangs complete all as specified and directed by Engr-in-Charge (Note :- All Cutting, welding, dirlling holes in existing floor and welding ends on existing RCC is included).

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, sockets ,ceiling rose, light fittings etc, and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down carefully MCB DBs/sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down existing ceiling fans any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust and all minor defect rectifying etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed by Engr-in-Charge.

Taking down existing geyser any size in position and re-fixing the same after B/R work including over oiling, painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust and all minor defect rectifying etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable with 16 Amps Pin top for connection from MCB box/16 Amps socket complete all as specified and directed by Engr-in-Charge.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and re fixing after work abov the suaitable rectangular wooden box including all fixing arrangement complete all as specified and as directed.

Taking down existing old unserviceble LT UG/ service cable of any descrition and size complete all as specified and directed.

Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non-metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal flush box, modular cover plate and modular cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- Make of cable - Havells/ Finolex/ RR Kabel Ltd/ L&T Make of PVC Conduit (FRLS) - Presto Plast/ Finolex/ Jindal/ Asian/ AKG

(a) One light/ fan/ bell point controlled by one switch

(b) One light/ fan/ bell controlled by one, two way switch 5/6 Amps

(c) One 5 Amps socket out let point controlled by one switch on SAME BOARD with other switches.

(d) One 5 Amps socket out let point on independent board controlled by one switch.

All as per item no 101 here in before but using FRLSH PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase/ neutral & for earth 2.5 Sqmm green FRLSH PVC insulated cable for 15 Amps socket point on independent board controlled by one switch.

Supply and fix in repairs Modular Switch flush type 6 Amps single pole, one way complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

S&F modular switch 2 way 6 A, 1 module complete all as specified and directed. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Bell push flush type, 6 Amps complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Switch 16 Amps single pole, one way complete all as specified. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply & fix in repairs modular fan regulator step type, 2 module type complete. Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Bell, ding dong type, AC 230 Volts, single pole complete.

S&F in repairs ceiling rose surface bakelite three terminal complete all as directed.

S&F in repairs lamp holder insulated body with back plate for batten fittings complete all as directed.

Supply and fix LED bulb of 7 watt, Of base B-22, suitable for fixing in lamp holder.

S & F for wall mounted LED tube light fitting 20 watts for surface mounted, anodized extruded aluminium housing, Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient high transmissitivity diffuser, high lumen ouput 230 volts and intregrated electronic driver connector block etc. complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Havells Cat Part No. LHEXBLP7PN1W020 or its equivalent in Philips, Wipro, Bajaj.

S & F for LED 9/10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make : Havells Cat Part No LHEXACP7IN1W010 or its equivalent model in Wipro, Philips, Bajaj.

Supply & fix surface mounted round LED panel of 12W Al die cast body with premium diffuser to ensure glare free & even distribution of light complete with electric connection all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Wall light fittings suitable for & including LED bulb of 7 watt, including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge. Make : Havells Cat No. LHDL07150099 or equivalent in equivalent in Bajaj, Philips/ Crompton.

M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, FRLSH drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC insulated FRLSH as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

Supply and fix in repairs double door SPN DBs eight ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link,Earth bar and Din ral complete.

S & F in repairs MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S&F Single pole and neutral enclosure 230 V with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps all as specified and directed.

Supply and fixing LED street light (in building peripheri) fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp GI bracket, clamps, nuts, boltsgrounded with impact and corrosion resistant including thermalmanagement in multiple optics complete with IP 65/66 protection complete

Supply and Fix in repairs flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for 100-125 Amps MCCB as incomer and SPN/TP MCBs as out going, 4 way (Optium 1+12 Module) complete all as specified and directed by Engr-in-Charge.

S&F (in replacement) MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 100 Amps rating, 16 KA breaking capacity complete

S&F modular TV socket as following :- (a) TV socket 1 module Make : Legrand Cat Part No 675546 -01 Nos (b) Modular with plate for TV socket 1 No Make : Legrand Cat Part No 674517 (c) Plastic flush boxes for 1 module jack Make : Legrand Cat Part No 673302 -01 Nos

S & F Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc.

Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250 mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. Make : Havells Model Ventil Air-DX White or equivalent in Crompton/ Almonard

Supply and lay XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts grade of size 35 sqmm 3.5 core, cross sectional area lay trenches/ wall/ poles/ ducts/ pipes or through sleeve etc including connecting/ jointing with lugs and testing all as specified and directed by Engineer-in-Charge.

Supply laying and jointing GI pipe 'light grade' 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified and directed by Engr-in-Charge.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed.

M&L in repairs for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, FRLSH drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 4sqmm cable with multistranded copper conductor green PVC insulated FRLSH as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

M & L for earthing complete with galvanised steel earth plate 600 x 600 x 6mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised Iron Wire of size 4 sqmm as earthing lead by means of bolts, nuts, cheek nut and washers of galvanised iron or steel besides at all joints as shown in Electrical Plate No-3 of SSR Part-I and including excavation and earth work GI pipe 20mm dia light grade protection pipe and including chorcoal filling common salt, PCC 1:3:6 type CI using 20mm graded stone aggregate chamber and MS angle iron frame 40 x 40 x 6mm and RCC cover 40mm thick (1:2:4) type B-1 using 20mm dia graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both ways with MS handle 12mm dia, CI funnel and wire mesh 20mm dia GI pipe medium grade for watering and connected to earth Test point (Including testing complete all as specified and directed).

Supply & fix in repair sheet metal enclousure box with a 3 pin (2 pin and earth) plug & socket complete with one MCB SP 20 Amps of breaking capacity 10KA, 'C' series, 240 volts complete all as specified and directed. Make : Cat Part No 810393 of Indoasian/ Bentec/ Havells.

GIRIRAJ CONSTRUCTION AND TRADERS

sabir and brothers

Jamna Constructions

sunway associates