Improvement and Development of Electrical Installation at Maternity Home Welcome Seelampur, JB 6-Block in Ward No. 39E Under Shahdara (North) Zone

Amount

Rewiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable and 1.5 sq mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel conduit inculding dismantling as required Group B

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel /PVC conduit including dismantling as required .

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (a)3 Module( 100 mmX75 mm)

(b) 4 Module (125mmX75mm)

(C) 6 Module (200mmX75mm)

(d) 8 Module (125mmX125mm)

(e) 12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a) 5/6 A switch

(b) 2 way 5/6 A switch

(c) 3 pin 5/6 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required (a) 3 x 2.5 sq. mm

(C) 3 x 6 sq.mm

(e) 3 x4 sq mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

SITC of surface mounting LED luminaire suitable for 20 watt box type LED rating complete with extruded aluminium batten prewired with high efficient LEDs with the following: a) Total System Wattage 20 ±5% Watt b) Luminaries effucacy ≥ 100 lumens/watt c) Power factor ≥ 0.95

S/I/T/C of Surface mounting CRCA housing 8W LED luminaire with acrylic cover diffuser with following specifications including fixing on existing wall/surface with connections as reqd. (a) Total system wattage = 8watt +/- 5% (b) Luminus effcacy >=95 lumans /watt. (c) Power Factor>=0.95

SITC of 150 W LED Flood Light luminiare fitted with lense, made of pressure die cast aluminium housing & toughned glass cover complete with the following specification as reqd with 5 year warranty. (a) Total system wattage =150 watt +/- 5%. (b) Luminaire Efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection Class- IP-66

P/F Hot press sheet moulded compound (SMC) fire retardant (Temp. resistance up to 200 C), IP 55 weather proof pole box of inner dimension 200x160x98mm (NS) complete with suitable arrangment for fixing of 1 nos of 6 to 32 amp single pole MCB (MCB/Isolator excluded) with neutral link duly shorting on DIN Channel with2 Nos of MS clamps with SS back plate of suitable size with danger monogram property printed on the cover etc as reqd. ( Without MCB)

Supply and fabrication of pole protection system made up of 8SWG steel wire mesh of size25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc as reqd.

Supplying and fixing following rating, four pole, (three phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) 63 Amp.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Double pole

Supplying, lowering, testing and commissioning of 1.0 H.P. single phase mono self priming pumping set having speed 1500 RPM suitable for a head of 18 to 45 mtr. Discharge 2800 to 880 LMP amd suction / delivery 25X25 mm suitable to work 180 to 230 volt, A.C. supply including testing commissioning etc as reqd.

S/F cubical panel 400x300x200 fitted with voltmeter 0-300V, Amp.Meter 0-30A ,MCB DP 32 Amp,DOL starter, MK complete with push buttan starter, painting , wiring upto for 5HP Mono Block Pump set etc as required

Supplying, lowering, testing and commissioning of following capacity vertical type, multistage, totally enclosed, water filled, deep well submersible pumping set complete i/c connections etc as reqd. Elec92.a Single phase 1.5 HP, having discharge of 60 LPM (approx.) at 50 M head.

Supply, Installation, testing and commissioning of cubical type control panel board for single phase submersible pumping set of following rating complete with contactor, relay , MCB ,condenser ,voltmeter, ammeter and indication lamp etc including connections etc as reqd. 1.5 H.P rating Submersible P/Set.

supply of XLPE Insulated PVC Sheathed Al. Conductor Armoured Cable for working voltage upto 1.1kV confirming to IS-7098 (Part-I) 1998 as required. 2x10sqmm

4x25sqmm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required 100 A, 16 KA,TPMCCB

150A, 16 KA,TPMCCB

315 Amp 35 KATPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

Supplying and fixing extra down rod of 20 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

Providing and Fixing of inverter with sine wave technology of capacity 1500 VA with 2 Nos. 150 Ah batteries (flat type Technology)and trolly suitable for keeping 2 Nos. batteries & 1 nos. inverter i/c wiring and connections etc as reqd

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Up to 35 sq. mm

SITC of 150 Ltr water cooler with cooling capacity Eco friendly (Non CFC Refrigent)water tank sheet material and thickness>=0.8 stainless steelwater tank cover and lid bottom sheet material, high impactPolystrene(HIP) conformity toIS: 1475 latest.

S/I/T/C of 15 (300) mm sweep Fresh Air fan heavy duty complete with shutters, blades etc as reqd

Supply, installation, Testing and commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Currect (BLDC) Motor, class of insulation:B, 3 nos blades, 30 cm down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, Earthng etc. complete as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

S/F installation of cubical panel board 16 SWG sheet M.S depth 30 cm to 60 cm with Al. bus bar and interconnection suitable for switch gears i/c making foundation etc as required

Providing & Fixing of ABC (Ammonium Phosphate) powder type Fire Extinguisher of 6 kg capacity complete in all respect with ISI mark i/c fixing arrangement as reqd.

Providing & Fixing 4.5 kg Co2 type Fire Extinguisher sqeeze grip type, trolly wheel as well mounted type complete in all respect with ISI mark i/c fixing arrangement as reqd.

Supplying and laying 63 mm dia (OD- 63mm & ID-51mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including hire & running charges of all equiopment, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All type of soil 115 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings& accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 100 mm nominal size dia

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 100 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts f required size complete. 100 mm dia

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 100 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal size

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal size

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore.

P and F following sizes of PVC insulated and PVC sheathed copper conductor 3 core submersible cable confirming to IS.647/1990 etc. as reqd. Elec94.a 3 X 2.5 sq.mm.

Providing and laying cement concreat 1:2:4 mix for sanitary sealing of well at top of 450mmX 450mmX 500 mm deep from top comp as reqd.

Supplying and laying 6 mm sizes of steel flexible rope suitable for holding submersible pump set i/c clips etc as reqd.