REPAIR MAINT OF ELECTRICAL FITTINGS AND FIXTURES CEILING FANS GEYSERS ETC AT RESIDENTIAL AREA KANKINARA UNDER GE NORTH KOLKATA

Amount

Taking down carefully unserviceable Copper/ Aluminium point wiring of any type (light/fan/socket/ power) complete including fittings and fixturs such as switches, ceilling rose, sockets, switches, regulator, lamp holder, etc by unscrewing from the board carefully and keeping aside serviceable materials for reuse including making good of the disturbed surfaces, all as directed .

Material and labour for concealed point wiring (concealed type) with PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed for One light point controlled by one switch. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be measured and paid separately. :-

All as per item No. 2 above but, One ceiling fan/ exaust fan point controlled by one switch and one regulator complete all as specified and directed.

All as per item No. 2 above but, One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.

All as per item No. 2 above but, One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

All as per item No. 2 above but,One call bell point controlled by one switch complete all as specified and directed.

Material and labour for concealed point wiring (concealed type) with PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note :- (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting if any for conduit wiring shall be measured and paid separately.

Material and labour for surface point wiring (surface type) with PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N-caping medium grade of suitable size but not less than 20 mm and accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed for One light point controlled by one switch complete. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate

All as per item No.8 above but, One ceiling fan/ exaust fan point controlled by one switch and one regulator complete all as specified and directed.

All as per item No.8 above but, One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.

All as per item No.8 above but, One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

All as per item No.8 above but, One call bell point controlled by one switch complete all as specified and directed.

Material and labour for surface point wiring (surface type) with PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N-caping medium grade of suitable size but not less than 20 mm and accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified as directed for One light point controlled by one switch complete all as specified and directed.. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate.

M&L for concealed point wiring for modular wiring (concealed type) with PVC insulated sheathed stranded copper conductor cable of size 1.5 Sqmm with PVC insulated sheathed stranded, for phase neutral and copper cable of size 1.5 Sqmm for earth continuity conductor to be drawn in and including PVC conduit medium duty of suitable size but not less than 20 mm and and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of modular metal flush box pressed steel sunken terminal made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer of suitable size and module MS sheet metal switch/ terminal box 1.2 mm thick including modular white cover plate with frames to accomodate modular switch/ socket, etc of suitable size and modules including making good the surface with the wall all as specified and directed for :- One light point controlled by one switch complete. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting if any for conduit wiring shall be measured and paid separately.

All as per item No. 14 above but, One ceiling fan/ exaust fan point controlled by one switch and one regulator complete all as specified and directed.

All as per item No. 14 above but, One 3/5 pin socket outlet 5 Amp on independent board complete all as specified and directed.

All as per item No. 14 above but, One 3/5pin 6 Amp Socket outlet on the same board with other switch complete all as specified and directed.

All as per item No. 14 above but,One call bell point controlled by one bell push switch button on independent board complete all as specified and directed. .

M&L for concealed point wiring for modular wiring (concealed type) with PVC insulated sheathed stranded copper conductor cable of size 2.5 Sqmm with PVC insulated sheathed stranded copper cable of size 2.5 Sqmm for earth continuity conductor to be drawn in and including PVC conduit medium duty of suitable size but not less than 20 mm and and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of modular metal flush box pressed steel sunken terminal made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer of suitable size and module MS sheet metal switch/ terminal box 1.2 mm thick including modular white cover plate with frames to accomodate modular switch/ socket, etc of suitable size and modules including making good the surface with the wall all as specified and directed for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as . Note :- (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. i(ii) Cost of chase cutting if any for conduit wiring shall be measured and paid separately). Make for item Nos. 2 to21:- Make for cable:- Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make for casing caping:-Plaza / Presto Plast / Precision / M/S AGK Industries. Make for conduit:-Plaza / Presto Plast / Precision/ M/S AGK Industries

Cutting chases,for concealed water tubing or concealed conduit wiring, etc plainning in, chases,and making good in cement mortar 1:3 ,cutting exc. 10 cm but not exc. 20 cm girth, in Brick wall / concrete surfaces etc complete all as directed .

Supply and fix switch piano flush buttom 5 Amp single pole one way 240 volt all as specified and directed

Supply and fix socket out let 3/5 pin 5 Amp flush type 240 volt.all as specified and directed

Supply and fix switch socket combination 3/5 pin 5 Amp flush type 240 volt.all as specified and directed

Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt.all as specified and directed

Supply and fix celling fan regulator(step regulator) socket type AC 230 volt suitable for ceilling fan any sweep all as specified and directed

Supply and fix bell push 6 amps complete all as specified as directed

Matetial and labour for call bell AC 230 volt single pole complete all as specified as directed

Matetial and labour for lamp holder PVC/Polycarbonate type with backplate suitable for battel fittings complete all as specified as directed

Supply and fix celling rose surface,3 terminal of min da 63.5mm and ISI marked all as specified and directed

Supply and fix Modular switch 1 way 6 A, 1 module

Supply and fix Socket, 6A - 5 pin combined 2 module

Supply and fix Modular switch 1 way 16A, 1 module

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module

Supply and fix Modular Bell push 6A 1 module

Supply and fix Fan step regulator, 120W - 2 module

Supply and fix modular cover plate with frame, 1 module-

All as per item No. 36 above but, 2 module

All as per item No. 36 above but,3 module

All as per item No. 36 above but, 4 module

All as per item No. 36 above but, 6 module

All as per item No. 36 above but,12 module

Supply and fix modular metal flush box, 1 module

All as per item No. 42 above but, 2 module

All as per item No. 42 above but, 3 module

All as per item No. 42 above but, 4 module

All as per item No. 42 above but, 6 module

All as per item No. 42 above but, 12 module. Make for item Nos.21 to 47:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL / C&S / Standard

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. Make of T/L fitting - Century LED Ltd Cat Part No. KCCF0200 / or equivalent in Wipro /Bajaj / C&S / Halonix / HPL / Havells / Jaguar / Orient. Make of LED T/L Rod - Century LED Ltd Cat Part No. TWPP020C / or equivalent in Wipro / /Bajaj / C&S / Halonix / HPL / Havells / Jaguar / Orient.

M&L for LED light fitting (cealing) recessed/ surface mounted 2 ft x 2 ft 36 watt LED tile provided with high transmission crylic cover polycarbonate diffuser modular to be fitted on POP/ Gypsum cealing lampwhite powder coated CRCA housing luminare including necessary electric connection with three core twisted flexible copper cable of suitable size from ceiling rose to connector of of light fitting complete including taking down unsv light fitting all as specified and directed. Make - Century LED Ltd Cat Part No. PCIN036W or equivalent in Wipro /Bajaj / C&S / Halonix / HPL / Havells / Jaguar / Orient.

Supply and fixing LED batten mirror light 12 Watt with electronic driver and diffuser and all accessories including two Nos 2nd class hard wood round block to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed. Make: Centrury LED Ltd Cat part No - BWUA012C1298/ or equivalent in Wipro /Bajaj / C&S / Halonix / HPL / Havells / Jaguar / Orient.

Supply and fix LED bulk head light fitting 12 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall/ ceiling complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking out old unserviceable fitting any type complete all as specified and directed. Make: Centrury LED Ltd Cat part No - HWAR012C/ or equivalent in Wipro /Bajaj / C&S / Halonix / HPL / Havells / Jaguar / Orient.

Supply and fix LED STREET light 45 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI bracket , made out of 32 mm dia medium grade GI pipe, 1.50 mts long. secured with MF flat 32x6 mm clamps, nut bolts and washers, of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete including taking down old light fitting any type complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPSP045C / or equivalent in Wipro /Bajaj / C&S / Halonix / HPL / Havells / Jaguar / Orient. Make of GI Pipe:-Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal / Nezone / M/S BST Infratech Ltd.

Matetial and labour for sub-main wiring with two run of FRLS.PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Three run of 2.5 sqmm cable one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces are deemed to be included in unit rate).

Matetial and labour for sub-main wiring with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed. (Note : (i) Three run of 4 sqmm cable one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces are deemed to be included in unit rate).

Matetial and labour for sub-main wiring with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 6 sqmm and one run of 6 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit medium duty of suitable size but not less than 25 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed. (Note : (i) Three run of 6 sqmm cable one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces are deemed to be included in unit rate). Make for item Nos. 54 to 56:- Make for cable:- Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make for conduit:-Plaza / Presto Plast / Precision/ M/S AGK Industries

Supply and fix sheet steel enclosure fitted with plug & socket metal clad AC box with MCB SPN 20A including insulated neutral link, adjustable DIN rail channel and connecting links complete after taking down the old socket board and connection complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix of 4 way TPN DB in double door suitable for four pole MCB TPN as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed.Note:- MCCB shall be measured and paid seperatly. Make: C&S/L&T/ Indoasian.

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way, including taking down the old unserviceable DB complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way, including taking down the old unserviceable DB complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix MCB TPN 63 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs, etc complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix MCB TPN 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs, etc complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix MCB TPN 32 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs including taking down the old unserviceable MC, etc complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix MCB single pole & neutral 40 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs, etc complete all as specified as directed Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs, etc complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs, etc complete eall as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix Blanking plate for MCB DB complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL.

Supply and fix power unit combo 20 Amp MCB protected socket complete including taking down the old socket and connection complete all as specified as directed. Make: C&S Cat Part No - CS26402WNR / or equivalent make in L&T/ Standard / L&T/ Indo Asian / HPL.

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 10 Sqmm 2 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable etc completed all as specified and directed.

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 2 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall / roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable, etc completed all as specified and directed.

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 4 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable, etc completed all as specified and directed NOTE for item Nos. 68 to 70:_ MS clamps shall be measured and paid separately Make for item Nos. 68 to 70:- M/s Havells / M/s Nicco / M/s KEI / M/s Polycab / Gloster / Universal) / HPL/ Dynamic cables / Finolex. / RR kabel / Mescab

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe(light grade), alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete.

GEYSER Taking down carefully storage type water heater (Geyser ) of any make of capacity 25/35/50 Ltrs after removing all electrical and water connection from installed position at different locations,dismantling the geyser into parts for inspection.Checking /testing of all parts/accessories like appratus plate,heating element,thermostat switch,neon lamp, water tank,safety valve, spacer ring, rubber gasket,nut-bolts,inspection plate, bottom& top cover etc and complete,de-scaling of water tank and brazing the same to make it leak proof complete inclduing replacement of unserviceable spare parts and re-installation, making electric and water connections and testing all as specified and directed. Note : - (i) The make of spares shall be of existing make of geyser or shall suit the existing make of spare, duly approved by the GE. (ii) Sparts required for replacement shall be measured & paid separately under supply only items hereinafter.The labour element involved in repalcing spares is deemed to include the unit rate quoted. (iii) Painting shall be measured and paid separately.

Supply only Apparatus assembly plate (8/9 hole) for Geyser of 25 /35 /50 Ltrs capacity, as per existing type and model complete.

Supply only thermostat straight stem type as per existing model complete.

Supply only heating element 1500 watt suitable for Geyser of 25 Litres capacity as per existing type and model complete.

Supply only heating element 2000 watt Gyser of 25/35/50 Ltrs capacity as per existing type and model complete.

Supply only Indicating lamp LED type,as per existing model (Red/Green) (square/round) batten type for Geyser of 25/50 Litres capacity complete.

Supply only 15 mm dia 450 mm long PVC flexible cold water inlet pipe, brass nut type complete.. Make: Prayag / Polytuf / M/s Sak Plast Pvt Ltd / supreme / Prince.

Supplyonly 15 mm dia 450 mm long hot water pipe (inlet wire mess and brass nut type, water inlet pipe complete all as specified and directed. Make: Prayag / Polytuf / M/s Sak Plast Pvt Ltd / supreme / Prince.

Supply & fixing 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated after taking down old one complete all as specified & directed. Make:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag.

Supply & connecting PVC insulated and overall PVC sheathed and flexible multistranded copper conductor cable 3 core of size 2.5 sqmm, for 25/35/50 Ltrs capacity Geyser after taking down old one complete all as specified and directed. Make for cable:- Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel.

FANS Taking down carefully the Ceiling Fan of any make / model and capacity from their existing position after disconnecting blades including other accessories / components, cleaning / greasing, replacing unserviceable spares, rewinding burnout / worn-out winding and reassembling all components,fixing / hanging in existing position after repair / painting work, etc complete all as specified and as directed. NOTE:- (i) The make of spares shall be of the existing make of fan or shall be as per the existing make of spare duly approved by the GE. (ii) The spares shall be measured and paid separately under supply only items. The labour element involved for replacing the spares shall be deemed to include in the unit rate quoted. (iii) Minor spares required such as, caster pins, rubber bushes, etc shall be deenmed to be included in the unit rate quoted. (iv) Rewinding shall be measured and paid separately. (v) Painting of fans shall be measured and paid separately.

All as per item No. 82 above but for, Exhaust Fan.

Supply only GM Bush for ceiling fan 1200/1400 mm sweep/ exhaust fan 230/300/350/450 mm sweep complete.

Supply only ball bearing for ceiling fan/exhaust fan (Bearing No. 6201) complete. Make:- TATA / SKF/ NBC

Supply only ball bearing for ceiling fan/exhaust fan (Bearing No. 6202) complete. Make TATA/SKF/NBC

Supply only bearing for ceiling fan/exhaust fan (Bearing No. 6203 complete. Make TATA/SKF/NBC .

Supply only capacitor of 2 mfd capacitance complete.

Supply only capacitor of 2.5 mfd capacitance complete.

Supply only capacitor of 3.15 mfd capacitance complete. Make for item Nos. 91 & 92:- :- Usha / C&S / Copco / L&T / Havells.

Supply only capacitor of 4.0 mfd capacitance complete. Make for item Nos. 88 & 91:- :- Usha / C&S / Copco / L&T / Havells.

Supply & fixing MS sheet folded type louver for 230/300 mm sweep exhaust, including taking down old unserviceable louver complete all as specified & directed.

Supply & fixing MS sheet folded type louver for 450 mm sweep exhaust, including b taking down old unserviceable louver complete all as specified & directed.

Material & labour for Spray painting ( DUCO Paint ) of Ceiling Fans including blades / down rods / canopy / stand, casing / cage and all accessories after thoroughly rubbing /cleaning old rusted spot and spraying of synthetic enamel paint, first quality, of existing tint by means of spraying machine and marking MES No. complete all as specified and directed. Make of paint:- Asian / berger / Jenson & Nicholson / Shalimar / DUCO Paint.

All as per item No. 94 but Exhaust fan 230/300 mm sweep.

Material and labour for rewinding of ceiling fans armature of 1200 mm/1400 mm sweep with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed.

Material and labour for rewinding of exhaust fan 230mm/ 300mm sweep, single phase, 230 volts with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed. Make of wire for item No. 100 & 101:- ICC / HPL / KEI / Finolex / Devidayal..

Supply and replacement of fan blades for exhaust fan of 230/ 300 mm sweep (as per existing sample) complete all as specified and directed.

Material and labour for replacement of incoming twin core of size 23/0.0076 copper flexible wire( not more than 45cm) from ceiling rose to ceiling fan / exhaust fans complete all as specified and directed. Make:- Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel.

Supply , fixing , testing and commissioning of Ceiling Fan 1400mm sweep copper winding durable with high quality double ball bearing white/ ivory colour with all accesories complete suitable for single phase 230 Volts AC supply with necessary electrical connection and fixing arrangement complete all as specified as directed. Make : Crompton/ Anchor/ Havells / Khaitan / Bajaj / usha / Orient.

M/L Ms flat 32x 6 mm as in clamps, bebt to required shape, drilling holes, fixing to poles etc and the like with nut, bolts and washers and preparing the surfaces of iron and steel and applying two coats of aluminium paint over a coat of zinc primer, etc complete. Make : Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyam metallics and energy ltd / Jindal.

A ESS and CO

MAZUMDER AND CO

SENCO

RAJ TRANCON

SHRI MILAN CHANDRA DAS

M/S KARTICK DUTTA

M/s P.K.Ghosh

The Planters Engineering Corporation