GE (AF)/SGR-53/2025-26ADDITION / ALTERATION TO EXISTING GUARD POST, UG SUMP NEAR STC GATE, CONSTRUCTION OF ADDITIONAL TOILET NEAR IL POINT AND CHAJJA PROTECTION FOR FURNITURE STORE, PROVISION OF HARDSTANDING, UNIT PARADE GROUND WITH INTERLOCKING TILE

Amount

Schedule 'A' Part-I (B/R Work)

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in any type of soil, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25cm, complete all as specified and directed.

Removal of excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed.

M&L for plain cement concrete, 1:4:8, Type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed.

M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:4, Complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (using old size bricks) straight or curved on plan to any radius in half brick thick wall radius, built in CM 1:4, complete all as specified and directed.

M&L for Hard core of broken stone gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete all as specified and as directed.

M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006, M-35 with grey cement and pigment over and including 75mm thick PCC 1:4:8, type D-2 (Using 40mm graded crushed stone aggregate) as in sub base and including 25mm thick compacted bed of fine sand, complete all as specified and direction.

M&L for 50mm thick plain cement concrete, 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring, laid in alternate bays and finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finished even and smooth without extra cement, complete all as specified and directed.

M&L for Reinforced cement concrete, M-30 (Design Mix) (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for Reinforced cement concrete, M-30 (Design Mix) (using 20 mm graded crushed stone aggregate) for Beams, chajjas, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

M&L for Reinforced cement concrete, M-30 (Design Mix) (using 20 mm graded crushed stone aggregate) for columns, pillars, piers, posts and struts etc., under-reamed piles and mass concrete, complete all as specified and directed.

M&L for Reinforced cement concrete, M-30 (Design Mix) (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for MS TMT bars 05mm dia and over upto 10mm in in stirrups, spacers and binders, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to edge of concrete flats exc 5cm but n exc 10cm wide, complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions Square and rectangle or polygon, complete all as specified and directed.

Formwork for rough finished surfaces of concrete to sides and soffits of floor beams, roof beams, beams, haunchings, girder, lintels, cantilevers, shelves including supports overhangs etc., complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Flat rough finished surfaces of concrete complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement using integral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid separately).

Supply only integral water proofing compound, complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

Preparation of new surface of wall and applying two coats of cement base paint over one coat of primer, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed.

S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 125mm size Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 100mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 125mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed..

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in CM 1:3, complete all as specified and directed.

S&F anodised Aluminium snap grid frame work of size 605 x 605mm for seamless ceiling, and hangers 6 mm dia G.I. ( Upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete and including supply and fixing 12mm thick Gypsum Board (water proof) fixed with screw or as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges other board any other joints with recommended jointing compound over jointing tapes, finishing with one coat of primer and two coats of oil emulsion distemper over a coat 2mm thick wall care putty, complete all as specified and directed.

S&F for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

S&F for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed.

S&F 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.

S&F vitreous China urinal half stall type, white, suitable for childrens with grating and union for discharge pipe and including waste pipe(excluding flushing cistern), complete including providing and fixing plugs,bedding urinal agaist wall in CM 1:2 securing urinals to plugs including 60 mm long brass screws including CP urinal spreader of any colour for fixing with 15 mm dia pipe (Minimum weight 60gms), complete all as specified and directed.

S&F vitreous china wash basin white ovel, size 550x400 mm, with & including 32mm dia PVC waste pipe 600mm long and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc., complete all as specified and directed.

S&F 15mm bore stop valve, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F 15mm bore bib tap, cast copper alloy, chromium plated, with capstan handle, screwed down, screwed from iron pipe or for brass ferrule, complete all as specified and directed.

S&F 15 mm size WHB / sink / wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia "D" type 60cm long between flanges, complete all as specified and directed.

S&F 15mm size PVC connections with PTMT nuts of length 600mm, complete all as specified and directed.

S&F 125mm dia grating doom with waste hole of PTMT (Minimum weight 40gms), complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed .

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed .

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed .

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed .

S&F 110mm PVC (SWR) WC connector with lip ring,complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.

S&F 75mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified.

S&F 110mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic bal screwed for iron pipe (minimum weight 210 gms), complete all as specified and directed.

Blank

Blank

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde-E-250) quality-B, complete all as specified and as directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality A, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long and diametre 16 to 20mm, complete all as specified and directed

Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars, complete all as specified and directed.

S&F 3mm thick figured glass, pinheaded type ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm, complete all as specified and directed.

M&L for 15 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms with gas pipe hole, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and directed.

S&F mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 in steel / wooden shutter of door & windows, complete all as specified and directed.

S&F 150mm bore salt-glazed stoneware drain pipes, grade 'A', laid in trenches and jointed as specified.

S&F 150mm bore, HDPE double wall corrugated pipe in any length with rubber ring joints, laid in trenches for sewage pipe, complete all as specified and directed.

M&L for concrete bed to 150mm bore drain pipes including packing under, and haunchings against the sides of pipes after they are laid in cement concrete, 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) and tested, complete all as specified & directed.

M&L for plain cement concrete, 1:2:4, type B-1 (using 20mm graded crushed stone aggregates), copings, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for Precast reinforced cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in cover slab for soakage well / manhole and similar works supported on walls including necessary formwork and set in cement mortar 1:4, complete all as specified and directed.

M&L for MS TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F Stainless steel plate rack (Utensil Rack) of size 990mm x 915mm, made out of stainless steel 1.00mm thick sheet fixed with brass screw of required size including necessary fittings/nuts, bolts & washers, complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not etc. 50m and making good surface, work in soft/loose soil, complete all as specified and directed.

M&L for plain cement concrete, 1:2:4, Type B-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply, installation, testing and commissioning of Smart Grease Trap of size 96"x48"x48" made manually with fully stainless steel 304 grade and 14 gauge of SS Sheet thickness with perforated sludge removal basket on inlet side partition of OGT capacity 2722 litres, Grease capacity 816 kg including necessary inlet & out let pipes of suitable sizes of dia 6" including civil works, Make: Smart Kitchen Appliances Mumbai, complete all as specified and directed.

Cleaning of 150mm bore underground sewage pipe (cleaning length n exc 30m from manhole to manhole or from manhole to septic tank) including taking off manhole cover and cleaning of manholes of any size and depth and removing waste material / sludge to a distance of n exc 300m and burying in a pit and replacing manhole cover in position after cleaning, complete all as specified and directed.

Cleaning of manholes of depth not exceeding 1.5m, of any size, bailing out sludge / foreign matter and removing the same and burying in grounds at depth 1.00m below GL at a distance n exc 50m and placing back the manhole cover in original position, complete all as specified and directed.

M&L for cutting & removing 150/200mm dia drain pipe from existing manhole and inserting new drain pipe of dia 150/200mm, making good disturbed surface and benching with cement concrete, 1:2:4, type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and directed .

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 and finishing even and smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed.

M&L for Reinforced cement concrete, 1:1.5:3, Type A-1 (using 20 mm graded crushed stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed.

M&L for 100mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe-290 (Gde?E165) (exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and directed.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and direction.

M&L for plain cement concrete, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates), as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for plain cement concrete, 1:3:6, Type C-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

Preparation of new plastered surfaces on ceiling and applying two coats of white wash, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of anti-fungal exterior emulsion paint over a coat of cement primer including thin layer of wall care putty, complete all as specified and directed.

Complete removal of existing treatment of walls and applying 1mm thick wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion paint, complete all as specified and directed.

Complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatment including thin layer of wall care putty and applying two coats of anti fungal exterior emulsion paint over a coat of cement primer, complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directed Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directed Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.

S&F pressed steel frame for doors with one rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed.

M&L for plain cement concrete, 1:2:4, Type B-1 (20mm graded crushed stone aggregate) as in hold fast blocks rungs etc. including necessary formwork, complete all as specified and directed.

S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed..

S&F 100mm size Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 100mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm size Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

S&F in repairs 250mm mild steel helical door spring rat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames, complete all as specified and directed.

Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F in repairs 20mm dia stainless steel drapery curtain rods including brackets, end finials (Latoo), for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc., complete all as specified and directed.

S&F Box type steel ventilation double frame (glazed & gauged) made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed Skelton shutter door frame of ERW tube P-section size 50mm x 20mm with two No's openable leaf consisting of two Nos of sash bar of T-sec 20mm x 3mm welded to frame with one No vertical mullion of ERW of ERW box type T-section size of 60mm x25mm FI 2mm thick welded / screwed to frame for fixing of wire gauge/glass and 10mm Sqr Bar security grill including fixture and fitting like as handle, tower bolt stopper , cleat, pintail hinges, holdfast primer etc. including taking down old, complete all as specified and directed. (Note- sheet glass, wire mess will be measured and paid separately and window will be measured one side only)

S&F Powder Coated aluminium frame for doors, windows, ventilators (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, 150 mm handles 2 Nos in each door shutter, 100 mm hinges-03 Nos, 150mm tower bolt -02 Nos in each shutter anodised aluminium snap beading, screws etc., complete all as specified and as directed.

S&F 5mm thick PVC sheet as in doors, of any colour, shape, size and design fixed on aluminium frame work including all necessary fittings and fixtures and necessary taping, complete all as per manufactures instructions, complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specifiedcomplete all as specified and directed

S&F 6mm thick non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / aluminium framework with screws including putty to receive finishes, complete all as specified and directed.

S&F in repairs 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed.

S&F in repairs 0.63mm thick Galvanised, corrugated mild steel sheeting (except sheet) with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed.

S&F in repairs 0.63mm thick Galvanised, Plain mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and directed.

M&L for tightening bolts and closing bolt holes, etc. to rectify the leakage / seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead, complete all as specified and directed.

Preparing new zinc (or galvanised) surfaces to receive painting of any description over 10cm width or girth, by coating with mordant solution including washing and cleaning, etc. steel and iron surfaces and applying two coats of synthetic enamel paint over one coat red oxide primer, complete all as specified and directed.

Preparation of old zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning etc. and applying two coats of synthetic enamel paint, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed.

M&L for 25mm thick plain cement concrete, 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble ), complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball PTMT valves, high pressure, with polythene float and flynut including dismantling existing water tank and removing from site, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

S&F for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

S&F for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

Refixing old GI pipe 15mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed.

Refixing old GI pipe 20mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed.

M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed.

S&F in repairs plastic water closet seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back, size 550x400 mm, with & including 32mm dia PVC waste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc., complete all as specified and directed.

S&F in repairs 125mm dia CP grating doom with waste hole, complete all as specified and directed.

S&F in repairs 100mm / 75mm stainless steel grating, complete all as specified and directed .

S&F in repairs 15mm bore telephonic wall mixture with hand shower( telephonic type), chromium plated with 900mm long chrome finish flexible pipe 15mm bore, complete all as specified and directed.

S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed.

S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed.

S&F in repairs 15mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repairs 20mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F 200mm dia towel ring and made out of 8-10mm dia hollow tubes superior quality, complete all as specified and directed.

S&F in repairs 5.5mm thick sheet glass shelf assembly consisting sheet glass, chromium plated, 600mm long and 120mm wide with chromium plated brackets, guard bar and railing, complete all as specified and directed.

S&F 6mm thick glass corner shelves, fancy type, 225x225mm size, complete all as specified and directed.

S&F in repairs stainless steel soap dish fixed to wall with plug and screw, complete all as specified and directed.

S&F in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin / urinal, complete all as specified and directed.

S&F in repairs 15mm size PVC connections with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repair 600mm long towel rail of PTMT fixed with and including chromium plated brass screw and wooden / plastic cleats(minimum weight 190gms), complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed .

S&F in repairs 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed.

S&F in repairs 110mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified.

S&F in repairs 75mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified.

S&F in repairs PVC (SWR) vent cowl 110 mm dia all as specified and directed

S&F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single, (Double T) equal or unequal, complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) junction single, (Double T) equal or unequal, complete all as specified and directed.

M&L for DWCPE (SN8) 180 (OD)/163(ID)mm diameter Pipes laid on150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional. layed with 150mm thick bedding 1:4:8 type D-2 and depth 0.70m to 1.65m average, complete all as specified and directed.

Schedule 'A' Part-II (E/M Work)

Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces as per existing, complete all as specified and directed.

M&L for Point wiring for one light / fan point / exhaust fan controlled by one way switch on Independent board with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen (FRLSH) copper conductor single core multi stranded copper cable confirming to IS:694 (2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0mm thick and minimum 20mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc with all accessories suitable for modular/conventional type fitment, provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches / sockets / regulator etc., including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly, complete all as specified and directed. Note: (i) For concealed point wiring cutting chases for conduit shall be measured and paid seperately (ii) For sinking boxes cutting chases for conduit shall be measured and paid seperately

All as per Ser item No 184.00 here in above but 3/5 pin 6 Amps switch socket outlet point on independent Board.

All as per Ser item No 184.00 here in above but 3/5 pin 6 Amps switch socket outlet point on same board.

All as per Ser item No 184.00 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 Amps power point.

S&F Modular switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed.

S&F modular Socket 6 Amp, 230 volts, 5 Pin universal, 2 Module, complete all as specified and directed.

S&F Modular switch 1 way, 16 Amp, 240 volts ,1 Module, complete all as specified and directed.

S&F Modular socket 6/16 Amp (euro socket), 250 volts, 2 Module, complete all as specified and directed.

S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed.

S&F modular step type fan regulator suitable for 120 watt 250 volts, 2 Module, complete all as specified and directed.

S&F LED batten extruded Al body with PC diffuser in unique square shape > 120 degree wide distribution, 4 feet 20 W of minimum efficacy 120 lumen / watts LED batten 4 feet 20 W, CCT 6500 K Complete including connection upto ceiling rose with flexible copper twin twisted wire incl taking down old u/s light fittings, complete all as specified and directed.

Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 6.0 Sqmm (in green volour), complete all as specified and directed. Note : Note :2 runs of 6 sqmm copper cable & 1 run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit.

S&F MCB of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA 'B' curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

S&F in replacement of MCB DP 20 Amps breaking capacity 10 KA 'B' series 415 volts 50 Hz complete all as specified and directed.

S&F in replacement of MCB DP 40 Amps breaking capacity 10 KA 'B' series 415 volts 50 Hz complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 8 Ways including taking down MCB DBs and MCB's, complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories 230V, 1200 mm sweep, minimum air delievery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC), complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm gradedcrushed stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe, complete all as specified and directed. Note: (i) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter (ii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department.

S&F 300mm sweep heavy duty exhuast fan, 900 RPM turbo force model single phase including all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc., complete as specified and directed.

S&F light fitting 9W/ 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ, complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated of cross sectional area 10 Sqmm 2 Core, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium conductor 1100 volt grade laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc., complete all as specified and directed.

Supply, Installation, commisioning and testing of 1.5 HP monblock pumpset, single phase, 220 volts, size 50 mm x 40 mm, cast iron, head range: 12.8-17.6 mtr, Discharge: 4.15 lps, Class A, 2 pole, S1 duty type, speed : 2900 RPM, suface finish paint coated complete all as specified and directed.

S&F for 50mm bore tubes, medium grade, galvanised, with all fittings laid in trenches including all fittings such as elbows, Tee, socket, union, reducers, etc., complete all as specified and directed.

S&F for 40mm bore tubes, medium grade, galvanised, with all fittings laid in trenches including all fittings such as elbows, Tee, socket, union, reducers, etc., complete all as specified and directed.

S&F for 25mm bore tubes, medium grade, galvanised, with all fittings laid in trenches including all fittings such as elbows, Tee, socket, union, reducers, etc., complete all as specified and directed.

S&F 50mm bore Gun metal globe or gate valve , yoke type, full opening with iron wheel head, screwed both ends , heavy duty, ISI marked complete for iron pipe, complete all as specified and directed.

S&F 40mm bore Gun metal globe or gate valve , yoke type, full opening with iron wheel head, screwed both ends , heavy duty, ISI marked complete for iron pipe, complete all as specified and directed.

S&F 25mm bore Gun metal globe or gate valve , yoke type, full opening with iron wheel head, screwed both ends , heavy duty, ISI marked complete for iron pipe, complete all as specified and directed.

S&F 50mm bore dia cast iron foot valve with one side flanged end including rubber insertion sheet, nut bolt washer, complete all as specified and directed.

S&F DOL starter HGS series in sheet metal enclosure with protection degree IP 54, 220 volts, 50 Hz for motor of capacity 1.5 HP conforming to IS/IEC-60947-4-1, complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated of cross sectional area 6 Sqmm 2 Core, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium conductor 1100 volt grade laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc., complete all as specified and directed.

Supply and laying DWC (Double wall corruguated) pipe 40/32 mm conforming to IS-14930/ IS-16205 for protection of earth strip/cable including necessary snap fit coupler reqd for fixing, complete all as specified and directed.

S&F FR PVC round sheathed insulated flexible copper cables two core 1100 volt nominal area of conductor 6 Sqmm conforming to IS 694, complete all as specified and directed.

M&L for Aluminium thimble suitable for 6 Sqmm single core copper cable, complete all as specified and directed.

M&L for copper thimble suitable for 6 Sqmm single core copper cable, complete all as specified and directed.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 23,060.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)

M/S SA INFRATECH (BID ID -3489638)

M/S AALIA CONSTRUCTION & ENGINEERS (BID ID -3489794)

M/S Abdul Ahad Rather (BID ID -3488796)

MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS (BID ID -3495385)

M/S FAROOQ AND SONS (BID ID -3489666)

M/S LATIF AHMED MIR (BID ID -3494903)