Loading
Loading…
Loading…
Tender Value
₹13.5 L
EMD Value
₹27,015
Closing Date
22 Oct 2026, 6:00 pm
EE Elec
AIIMS BBSR
SITC of electrical work for skin bank research room and laboratory located at third floor of Burn Unit at AIIMS Bhubaneswar
2026_AIIMO_928472_1
AIIMS/BBSR/ENGG/ELECT/34/2026
Open Tender
Electrical Works
Percentage
60 days
AIIMS BBSR
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹27,015
1 Oct 2026
1 Oct 2026
24 Oct 2026
1 Oct 2026
22 Oct 2026
1 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. | |||||
| 1.01 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire | 900 | Mtr | 373 | ₹3,35,700 |
| 1.02 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | 100 | Mtr | 311 | ₹31,100 |
| 1.03 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire (for Hot Forced Air Oven) | 30 | Mtr | 813 | ₹24,390 |
| 1.04 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire (for corridor 3rd floor) | 250 | Mtr | 1,454 | ₹3,63,500 |
| 2Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. | |||||
| 2.01 | Group B | 100 | Point | 885 | ₹88,500 |
| 3Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). | |||||
| 3.01 | 36 watt (CRCA Sheet Body (Thickness ≥ 0.50 mm) | 50 | Each | 2,846 | ₹1,42,300 |
| 4Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round ) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000, Burning Hours with , 70% of initial Lumen maintained till life ends as ,per LM80 extrapolation IES TM-21-11 report, CCT 6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as requiredwith Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
34NIT.pdf
Tender Documents • 0.78 MB
BOQ_975727.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .