SPL REPAIR TO BLDG NO 11 VEER LINE OF 1 CSR A UNDER GE EAST MATHURA

Amount

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m meter radius built in cement mortar 1:6 complete all as specified.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified.

Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water etc complete.

M&L for rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & fair in CM 1:6 all as specified.

Supply only liquid water proofing compound.

Dismantling of 6 mm thick AC corrugated or semi-corrugated sheets in roof covering including ridges, hips, valleys and flashings etc complete.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete.

M & L pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw as specified.

Dismantling of timber scantlings 40 Sqcm & over in section in any position in framed work in fillets rails posts rafters purlins in framed work

M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240.

S&F MS flat iron wind ties for roof including all necessary drilling, bolting or riveting etc complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.

M&L for 4 mm thick Non asbestos fibre cement building boards fixed or laid on GI framework fixed in ceiling complete all as specified. Make: Everest or equivalent approved makes

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L Non skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding o.11 sqm but not exceeding 0.18 sqm ,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and incl 15 mm thick screed bed or bedding layer in CM 1:4 all as specified and as directed.

M&L for providing glazed ceramic tiles on vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering as in backing coat in cement mortal 1:4 complete all as specified.

M&L for providing Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each

Supply only 5 mm thick tinted glass, Ordinary quality n exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified.

Supply & fix 100mm long Stainless steel hinges with galvanised mild steel hinge pin, and fixed, type B-21

S&F 150 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed

S&F 150 mm Brass handles, cast type, polished bright complete all as specified.

Supply and fix 250 mm long brass chromium plated, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each.

M&L for Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm(0.2 mm ).Window profile with hollow section with multi chamber. Frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm ). Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware. EPDM gasket 1.2 1-0.2 mm thick galvanized steel frame (30mmx18 mm) 2 No.s ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners.HardwareTouch lock of zinc alloyed (white powder coated ),steel roller system ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories . Note :- The unit rate quoted by contractor excludes cost of glass & stainless steel wire cloth but include all other connected accessories. Net opening will be measured for payment purpose. Area n exc 2.00 Sqm Each

S&F Powder coated (minimum thickness of powder coating shall not be less than 50 micron of approved colour) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L Powder coated (minimum thickness of powder coating shall not be less than 50 micron of approved colour) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar.

M&L for 20 mm thick Granite slab (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified.

S&F in repair Wall hung Basin with fixing Accessories set size 550x400x200mm with full pedestal complete all as specified. Make Jaquar CNS-WHT-303 for wash basin CNS-WHT-811 for pedestal or equavalant make given under list of makes .

S&F in repair Central Hose Basin Mixer without popup waste system with 450 mm long Braided Hoses Make:Jaquar SOL-6167B or equavalant make given under list of makes .

S&F in repair EWC 705x370x770mm S trap 300 mm complete including fixing to floor complete all as specified and directed. Make:Cera Christina Cat No. S1013119 or equavalant make given under list of makes .

S&F in repair 2 way bib cock of superior quality with wall flange 15 mm dia including fixing to pipe complete all as specified and as directed.

S&F in repair Health faucet of superior quality ABS body with 8 mm dia 1.2 m long flexible tube and wall hook including fixing complete all as specified and as directed.

S&F in repair toilet paper holder of superior quality including fixing to wall complete all as specified and as directed.

S&F in repair bib cock 15 mm bore chromium plated Straight line model with wall flange complete all as specified and directed. Make :Jaquar Cat No. SOL-6047 or equavalant make given under list of makes .

S&F in repair Wall Mixer with Telephone shower arrangement connecting legs and wall flanges but without crutch & telephone shower complete all as specified. Make :Jaquar Cat No. SOL-6217 or equavalant make given under list of makes .

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)

Supply and fix in repair chromium plated Shower arm 15 mm size, 195mm long with bend of 45degree with flange of any colour.

S&F Soap dish holder fixed to wall complete all as specified. Make :- Jaquar Cat Part No ACN-1131N or equivalent in Grohe/Kolher

S&F in repair Angular cock with wall flange complete all as specified. Make:jaquar Cat . No. SOL -6053 or equavalant make given under list of makes .

S&F in repair Towel Ring Round with Wall flange complete all as specified. Make:Jaquar Cat No. -ACN1121BN or equavalant make given under list of makes .

S&F in repair Towel Rail 600 mm long complete all as specified. Make:Jaquar Cat No. -ACN1111NM or equavalant make given under list of makes .

S&F in repair PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screw all as specified and as directed. Make:- Prayag Cat No 551 or equvallent of make Commonder / Neelkamal / Polytuff

S& F in repair glass corner shelf having 300 x 300 mm dimension complete including fixing to wall complete all as specified.

S&F in repair bevelled edge mirror fixed with brackets complete all as specified.

Dismantling water tanks exc 500 ltrs and n exc 1000 ltrs complete all as specified and as directed.

Supply and fix 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

S&F in repair 25 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified.

Taking up or down 15 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 25 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed

Supplying & fixing to walls and ceiling 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed

S&F 75 mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement all as specified.

S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement all as specified.

S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.

S&F in repair 110mm PVC (SWR) pipes type 'A' single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors

S&F in repair 110mm PVC (SWR) pipes type 'A' single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors

S&F 110mm bore PVC (SWR) bends any radius all as specified and as directed.

S&F 110mm bore PVC (SWR) bends with access door any radius all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) with access door all as specified and as directed.

S&F 110 mm bore PVC (SWR) branch piece, double (double Y), equal or unequal with access door all as specified.

S&F 75mm bore PVC (SWR) bends any radius all as specified and as directed.

S&F 75mm bore PVC (SWR) bends with access door any radius all as specified and as directed.

S&F 110mm bore PVC (SWR) vent cowl all as specified and as directed.

S&F Stack clamps out of 50mm by 5mm flat iron for fixing of 110 mm pipe to wall including all fixing arrangement.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level).

M&L for 50mm thick in PCC M-10 grade (Nominal mix) as in plinth protection surface finished even and smooth without using extra cement all as specified.

M&L for preparing new plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint dark shade (100% Acrylic) over a coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for prepreation of newly plaster suface of wall and applying two coats of oil bound distemper over a coate of Alkali resistant over a coat of wall care putty not less than 1mm thick complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specified.

M&L for preparation of old plastered surface of wall and applying one coat of distemper oil emulsion complete all as specified.

M&L for preparation of old wooden surfaces over 10cm width or girth using mechanical scrapper and applying one coat of synthetic enamel paint all as per specified.

S&F factory made PVC Cabinet of required size fabricated by joining 12 mm thick PVC celuka ply fixed with each other using solvent cement fixed with screw and solvent cement adhesive etc. complete as per specifications and as directed by the engineer - in -charge.

S & F 18 mm thick solid PVC Kitchen PVC Sheet one side prelam sheet kitchen cabinet shutter of density 600 kg/cum bent at 90 degree and finish all edges at level for making edge lipping/bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding lape etc complete as per direction of Engineer in charge Manufacture's specification. Make :- RAJSHRI PLASTIWOOD LTD/SINTEX INDUSRIES LTD/DURGA PLAST EXTRUSION

S&F 18mm thick factory made PVC shelf/partion of required size consisting of panel of celuka PVC ply and for supporting the hold of shelf /partion and shall provided 3 edges in size18 mmx 18mm as per required lengththe front side of the edge visible in the front of the shelf /partion to be edge lipped by 18 mm widthx1mm thick PVC sheet of density 600 kg/cum manufactured by complete by direction of Engr-in-charge.

S&F brass handles cast type polished bright handles 100 mm size for kitchen cabinet shutters Make-KAFF, Godrej & Hettich

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, Make:- KAFF, Godrej, Hettich.

S&F Magnatic catcher (KTS-20) full extension load capacity 8 kgs, Make-KAFF, Godrej & Hettich

M&L Brass 4 lever mortise lock of size 100mm fixed to aluminum door and frame complete all as specified and directed. Make Harrison/Godrej.

S&F in repair 20 mm dia, stainless steel curtain rod with fixing brackets, stops, rollers etc.complete all as specified.

S&F auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make:- KAFF, Godrej, Hettich

S&F stainless steel Tower bolt 100 mm size for kitchen cabinet shutters Make-KAFF, Godrej & Hettich .

S&F in repair Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

S&F in repair Kitchen Plate Rack 775X600X250 MM deep fixed to wall with screws complete all as specified.

M&L for obliterating old writing of any description with synthetic enamel paint n.exc 0.10 sqm each to match the existing work complete.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 Cm high complete.

M&L of sanding the surface to make it smooth and ready for painting and applying one coat of deco solvent based primer over the surface applying 2 coats of acrylic wall putty to make the surface smooth after 4-6 hrs drying time and sanding the surface , one coat of deco solvent based primer should be applied over the arcylic putty to fill the pours one step of sanding should be done before the application of 1st coat of royale base coat and 2nd coat of royale luxury emulsion diluting with water as per recommanded procedure.After the drying time of 3-4 hrs applying top coat of co polymer based interior special effects emulsion which will not rag or sag on vertical surface with abrasion resistance odourless and non toxic properties to provide different type of special effects such as crinkles dapple weaving, canvas, spatula, colourwash, ragging, sponging, combing, brushing etc with different tools complete all as directed by Engineer-in-Charge.

M & L for treating the soil along with external perimeter of building at the rate of 2.25 litre of chemical emulsion in water of one percent Chlorpyrifos 20 EC for per metre of the perimeter wall complete all as specified and as directed.

M & L for treatment of soil under existing floors using chemical emulsion in water of one percent Chlorpyrifos 20 EC at the rate of one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures (such as ceiling rose, socket, Pendent, regulator etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. Note: Credit for above items shall be made as per schedule of credit.

Taking down carefully by Submain wiring of any type complete all as directed by Engineer-in-Charge.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall incl cutting & chases( making good all to the disturbed surfaces as per existing) and modular flush metal boxes including cover plate with frame for mounting modular switches, sockets, regulators,socket etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge , as described below:-

One light point controlled by one way Modular switch 5/6 amp complete.

One ceiling fan point controlled by one way Modular switch 5 amp and one regulator complete.

One exhaust fan point controlled by one way Modular switch 5 amp complete.

One 3 pin 5 Amps socket point controlled by one Modular switch on same board.

One 3 pin 5 Amps socket point controlled by one Modular switch on independent board.

One bell point controlled by one Modular push button on independent board

All as per item No. 105 but for 3 pin / 5 pin 16 Amps Modular sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable including earth wire of PVC insulated (FRLS) copper conductor multistranded of 4 Sqmm size in green colour independent complete all as specified and as directed .

M&L for Cable TV Point wiring with RG-06 (foam), electrolytic grade solid annealed Copper conductor,Jelly Field, Aluminium Foiled and Aluminium wire Braided as per ISI marked including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall with modular / gang box both side (In room & Out side for connecting of outer cable) suitable for fixing of TV socket as directed by the Engineer-in-Charge .

M&L for Telephone Point wiring two pair with PVC Insulated unarmoured 0.4 mm ATC cables for indoor applications as per ISI marked including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall with modular / gang box both side (In room & Out side for connecting of outer cable) suitable for fixing of Telephone socket as directed by the Engineer-in-Charge.

M&L for Sub Main wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note :- Two run of 6 Sqmm, one run of 6 sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

M & L for Sub Main wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note :- Two run of 4 Sqmm, one run of 4 sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified. Make :- SSK/Anchor/Cona/ Havells.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified.

Supply and Fixing Modular bell push switch 6 Amps with indicator single pole one-way, 1 Module complete all as specified.

Supply and Fixing Modular switch 16 Amp single pole one way,2 Module all as specified.

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module complete all as specified.

Supply & Fixing Modular fan Regulator electronic step type, 120 watt, 2 Module complete all as specified.

Supply and fixing Bell Multi Music type, 230 Volts complete with connection all as specified & directed.

Supply and fixing Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.

Supply and Fixing Modular TV cable (both Male & Female) socket , 1 Module complete complete all as specified.

Supply and Fixing Modular Telephone cable socket , 1 Module complete complete all as specified.

Supply and fixing for 28 Watt LED decorative recessed mounted Panel light made up of powder coated CRCA sheet suitable for Lumen efficancy > 110 Lm / Watt , CCT 6500K, operating Voltage 140V to 270 Volt , short circuit protection , surge protection, complete suitable for 600mm x 600mm modular / POP / Gypsum ceiling complete all as specified. Make : Havells (Ref Cat No For Light : VENUSNEOHE2X2R18-42WLED857MOD UGR<19 & For Driver : LEDDRIVER36V28WS) its equivalent in Bajaj / Crompton / Philips / Bajaj

Supply and fixing LED 7 Watt decorative fittings, 230 V AC supply, suitable for fixing on bed room ( Bed side wall) including inbuilt On-OFF switch for easy to operate complete all as per sample & directed by Engineer -in-Charge. Make - Philips/ Havells/ Bajaj or equivalent

Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make:Havells (as per Cat Part No: LUMILINEBS20WLED 865 SPC WH) or equivalent to CG/Bajaj/Philips

Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 9 watt LED Tube fitting suitable for mirror light fitting complete all as specified

Supply & fix surface mounted bulk head LED light fitting of 10 watt with all accessories and connection complete all as specified and as directed. Make: Cat part No HEXAFT10WLED857SSYMBOPC of havells or equivalent.

Supply & fixing decorative Wall light fitting including with 20 watt LED lamp complete with all accessories and including connection complete all as specified and as directed. Make : Philips as per Cat Part No 31455 White silver wall Light or equivalent to Havells / Bajaj / CG

Supply and fix LED 15 W lamp suitable for normal holder( Base Cap B22) complete all as specified. Make : Havells or equivalent to Philips / Bajaj / CG

Supply and fix modular power socket 16 Amp unit protected with 16 Amp SP MCB including with sheet enclosuer complete all connection as directed. Make : Havells as per Cat Part No DHDMCSN0251016 or equivalent of Legrand /L&T

Supply and fix DP enclosure suitable for AC connection with a two pin and earth plug and socket complete with DP MCB of rating 20 Amps, 240 Volts complete.

Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified. Make of fitting : Havells (as per Cat Part No : ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC) or equivalent in Crompton Greaves/ Bajaj/Philips / C&S (meeting all the above specification).

M&L for building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description.

S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, 8 way complete all as specified.

Supply & fixing MCB SP 6 - 32 Amps, 'B' series, breaking cap10KA complete all as specified and directed.

Supply & fixing MCB DP 6 - 32 Amps, 'C' series, breaking cap10KA complete all as specified and directed.

Taking down the ceiling fan of any sweep carefully from its installed position, dismantling complete, with down rod and clamps and cleaning of all dust, painting of fans and down rod with synthetic enamel paint by spraying and keeping a side safely and hanging/refixing in position after false ceiling work or as directed and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as directed. Notes: - (i). Any damages/broken of fans during the work,contractor will be responsible for the repair of the same or replaced with new without any extra cost.

Taking down exhaust fan of any sweep carefully from its installed position and painting of metal parts of fans with synthetic enamel paint by spraying and keeping a site safely and refixing in position after civil works or directed and connecting of including provision of 3 core twisted flexible copper conductor cable of 0.75 Swmm from ceiling rose to connector of fan and testing on completion complete all as directed Note : Any damages/broken of fans during the work,contractor will be responsible for the repair of the same or replaced with new without any extra cost.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete. Note: GI wire and protection pipe upto 7.5 Mtr length from earth electrode shall be included in quoted rate of item.

Supply and lay GI tubing, light grade, 15 mm bore dia as cable protection fixed on walls/poles/laid in trenches complete including dismantling corroded GI pipe all as specified and as directed.

M&L for GI earth lead 4 mm burried in ground / fixed on walls complete with ffixing screws, nut, bolts etc complete all as specified and as directed.

Taking out the electric geyser of capacity 25 Ltrs carefully from its installed position by disconneting inlet and outlet water pipes and painting of geyser body with seythetic enemal paint by spraying and keeping a side safely and refixing in its original position with connecting of inlet/outlet water pipes after completion civil works of bathroom and testing complete all as directed by Engineer-in-Charge. NOTE:- Any damages/broken of gyeser during the work, contractor will be responsible for the repair of the same or replaced with new without any extra cost.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed

Taking down existing TPN DB including MCCB / MCB any type / size carefully from its installed position by disconneting all connections and keeping a side in safe custody and refixing the same as directed position with existing MCCB and MCB including additional Provision new earthing & netural link and din rail for fixing of additional MCB with connections as directed and making good disturbed surface / wall as per existing complete all as specified and directed. Note :(a) Fixing of additional MCB Qty shall be paid separately under relevent items. (b) Any damages / brocken of DBs during the work, contractor will be responsible for the repair of the same or replaced with new without any extra cost.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, with Copper bus-bar 200Amp, neutral link, earth bar and din rail 440 V, 4 way including fixed with MCCB 100 Amps 4 poles, 6KA complete all as specified and directed by Engineer-in-charge.

B S ENTERPRISES

BHARDWAJ CONSTRUCTIONS

KASHI NATH BANWARI LAL

M/S YATENDRA SINGH

JWALA ELECTRIC CONTRACTORS

M/s Aditya Enterprises

S M TRADERS

M/s Singh Engineering Corporation

Ms Kamal Kant Agarwal

ARCHI ENGINEERS