Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.4 Cr
EMD Value
₹6.8 L
Closing Date
5 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Establishment of Data Center for Project Parivartan at RWRDC including 3 years Operation and Comprehensive Maintenance of Non IT assets
7336
FM/NE-P/Advt./03/24-25 Dt:06.05.24
Works
Electrical Planning and Contract Section-E and M Dept-FMD-Bangalore
₹0
₹6.8 L
5 Jun 2024
8 May 2024
8 May 2024
5 Jun 2024
Name of the Individual / Firm / Company: * (Mandatory)
Type of ownership / Legal Status [Attach copies of the original document defining the legal status]
Year of Establishment of Company/Business
Registered Office Address, Telegraphic Address, Telephone No., Website / email id, FAX No.
Correspondance Address, Telegraphic Address, Telephone No., Website / email id, FAX No.
PAN no
PF number (If any)
ESI number
GST registration number
Particulars of registration with various Government bodies (Attach documentary proof)
Contact details
Please enter Contact person name
Valid Electrical contractor licence of appropriate voltage issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 or as amended from time to time
Enclosed
Enclosed
Enclosed
Maximum value of works executed during the following 05 years and it should be certified by Chartered Accountant. (In Rs. Lakhs)
Please enter maximum values of works (sum of all the works in the respective year) in Rs. Lakhs for all the years
DETAIL OF WORK ON HAND UPTO COMPLETION PERIOD OF SUBJECT WORK (N=completion period=3months=3/12= 0.25 year) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 10 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.
Name of Organization with address
Balance Work On Hand
Action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No.
Name of the Bank
Type of Account
Branch, Place
Bank Code No.
MICR No.
ECS No.
IFS Code
Bank Statement for past THREE months
Latest Over draft Facilities with Bankers
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the final date of submission of Tender.
Please enter Latest Solvency Details and upload the same
Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following:. [ Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.
You are Not Eligible
Type of Work [ Incase of private works the same shall be supported with TDS certificate]
Type of Work [ Incase of private works the same shall be supported with TDS certificate]
Type of Work [ Incase of private works the same shall be supported with TDS certificate]
work done
DETAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficient separate sheet to be uploaded with the same format as below)
Name of members or technical personnel available in the organization
PLANT, MACHINERY AND EQUIPMENT AVAILABLE [The Plant, Machinery and equipment (either owned or leased) that can be made available for this work must be furnished below].
Name of Machinery
Works of similar nature successfully completed in addition to Sl. No. (21) of Applicant Particulars (1) during the last 07 years ending last day for previous month.
Name of the work / project and location
Details of person holding the power of Attorney
Please enter Person holding the power of attorney
DECLARATION I
Please Accept the Declaration I
DECLARATION II
Please Accept the Declaration II
Tender Document Cost and EMD details
DD No. & Issue Date
Please enter Tender Document EMD Details
The payment terms shall be governed as per the terms indicated in General conditions of contract.
Basic Rate to be quoted for each item. Subject work is called on works contract basis and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.
L-1 (Lowest quote) will be determined based on total amount quoted for both Part-A and Part-B together including GST.
Amount towards GST will be paid along with RAR payment against invoice.
The tenderers are requested to abide by the rules of prevailing GST act.
It may be noted that, the sucessful tenderer have to submit the Security depsoits for Part-A work (Establishment) and Part-B work(CAMC) have to be submitted separately as per the details given at SCC clause no:01
This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.
Specification of item
Supply and fixing of floor Mountable 42U Network/Server Rack(800x1200x2100) with 2 nos of Intelligent Power Distribution unit(IPDU) and cooling fans, earthing cable etc. with all standard Accessories, complete in all respects as per technical specification and as directed by Engineer-in-charge.
Supply & fixing/drawing on existing cable tray of following CAT6A cable.
CATEGORY 6A TWISTED-PAIR CABLE U/UTP,Four-pair, balanced twisted-pair cable, with internal spline, certified to meet transmission characteristics of Category 6a cable at frequencies up to 500 MHz,Standard: Comply with ANSI/TIA-568.2-D for Category 6a cables, Conductors: 100-ohm, 23 AWG solid copper, Power over Ethernet: Comply with IEEE 802.3bt (Type 4), Inside plant.
CAT6A Information Outlet- Indoor
CAT6A Dual Ports Faceplate including GI Gang Box complete with all accessories & dust cover
CAT6A Four Ports Faceplate including GI Gang Box complete with all accessories & dust cover
CAT6A 24 port Patch Panel-Straight -fully loaded
CAT6A Patch Cords- 1 Mtrs- Indoor
CAT6A Patch Cords- 3 Mtrs- Indoor
Supply & fixing/drawing on existing cable tray of following OS2-Singlemode Fiber Cabling
24 Core Indoor Singlemode Fiber Cable ( Indoor )
24 Core LIU fully loaded (With Singlemode OS2 Pigtails LC Type, Adaptors, Splice Trays Etc.)
48 Core LIU fully loaded (With Singlemode OS2 Pigtails LC Type, Adaptors, Splice Trays Etc.)
1Mtr Fiber patch Cords (LC -LC)
5Mtr Fiber patch Cords (LC -LC)
Supply, Installation, Testing & Commissioning of Fire Alarm systm
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required
Supplying & laying of 2x1.5 sqmm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.(for fire alarm work, Access control, WLD, VESDA)
Supply, Installation, Testing & Commissioning of Fire Suppression System
Supply, Installation, Testing & Commissioning of 2 Zone conventional Microprocessor based Fire Alram Control Panel with Auto gas release module and Battery Back up.
Supply, Installation, Testing & Commissioning of 100 Ltr Cylinder with Accessories
Supply of-INERGEN GAS - IG541.
Supply, Installation, Testing & Commissioning of Discharge Hose Pipe
Supply, Installation, Testing & Commissioning of Electric Actuator 24VDC
Tank Bracket Assembly Cylinder Straps
Supply, Installation, Testing & Commissioning of discharge Nozzles
Supply, Installation, Testing & Commissioning of M.S. Seamless pipes as per ASTM A 106 Gr.B, schedule 40 with necessary fittings.
Supply, Installation, Testing & Commissioning of Conventional Smoke Detector with base
Supply, Installation, Testing & Commissioning of release switch with accessories
Supply, Installation, Testing & Commissioning of abort switch with accessories
Supply & fixing of 4KG fire Extingusher for Support Area ( Co2 based )
Supply, Installation, Testing & Commissioning CCTV Systems ( Close circuit television system )
Supply, Installation, Testing & Commissioning of Network IR 2 MP indoor dome camera, CCTV Cameras with IK 10 Protection with camera Back box & jack
Supply, Installation, Testing & Commissioning of 16 channel NVR
Supply, Installation, Testing & Commissioning of 4TB Harddisk
Supply, Installation, Testing & Commissioning of 24 P POE Network Switch with all required accessories
Supply, Installation, Testing & Commissioning of 32" Display Systems With Accessories
Supply, Installation, Testing & Commissioning of Access Control System
Supply, Installation, Testing & Commissioning of 4 Door control panel
Supply and installation Access Control System Software with required licenses
Supply and installation of fingerprint reader for Server room
Supply and installation of Smart Card reader with accessories
Supply of smart cards
Supply and installation of 600lbs electromagnetic lock for single leaf wooden door with accessories
Supply and installation of 1200lbs electromagnetic lock for double leaf glass door with accessories
Supply and installation of Emergency release switch
Supply & laying/drawing of 4 Core 1.5 Sqmm armoured shielded cable with accessories
Supply, Installation, Testing & Commissioning of Very Early Stage Smoke Detection System (VESDA)
Supply, Installation, Testing & Commissioning of VESDA controller for Server Room with required nozzles at all voids and inside the cold aisle containment. The system shall have an independent hooter with power supply and integrate to BMS system. The system shall be design as per NFPA reuirements as per design layout.
Supply and fixing of Sampling Point Nozzle for Capillary tube end and Label along with accessories.
Supply and laying of 25MM dia UPVC Pipe with accessories for aspiration.
Supply, Installation, Testing & Commissioning of Water leak detection system
Supply,installation,testing and commissioning of 2 Zone Water Leak Detection panel with Modbus connectivity. (at Data center room)
Supply & laying of Water Leak Cable Sensor - 20 mtrs including fixing clip and any other required accessories as per standard and as directed. (at Data center room)
Supply,installation,testing and commissioning of Hooter cum Strobe. (at Data center room)
Supply, Installation, Testing & Commissioning of Rodent repellent system
Supply and fixing of Rodent Repellent controller/Master console(VHFO V2 Controller), suitable of Two zone with minimum 24 satelities including accessories and fixtures/fixing bracket complete in all respect and as directed by the Engineer-in-charge.(at all rooms refer drawing)
Supply,installation,testing and commissioning of Miste Transducers( satellite units) with fixing accessories complete in all respect and as directed by the Engineer-in-charge. (at all rooms refer drawing)
Supply and drawing in the existing PVC conduit (between transducers and master console)2 core 1.5 sqmm multistranded PVC insulated copper conductor 1100V gr. unarmoured UG cable including end terminations complete in all respects and as directed. (at all rooms refer drawing)
Supply, Installation, Testing & Commissioning of Integrated Building management solution
i)Supply, Install, Testing & Commissioning of Building Management software. The software should be capable of generating reports as per client requirement mentioned in technical specification. In addition, The contractor to suggest the different reports which are not specifically mentioned in the specification but inline with OEM capabilities. The Software shall support a BACnet protocol which is an ASHRAE, ANSI and ISO standard protocol operating in three modes. It should be able to communicate & integrate with other protocols.-1 set ii)Supply, Install, Testing & Commissioning of Third Party Integration: The Protocol Integrator/ Convertor shall be Capable to Integrate Open protocol systems on BACnet /Modbus/ LONWORKS/M-Bus/J-Bus Protocol or on serial RS 485 / 232 interface.-1 Lot iii)Supply, Install, Testing & Commissioning of Network Switch with rack to connect all the DDC (24 port switch)-2Nos
Supplying, Installing, Testing & Commissioning of Room type Temperature and RH Sensor
Supplying, Installing, Testing & Commissioning of Outdoor Temperature and RH Sensor
Supply and surface laying of 2C x 1 sq.mm unscreened cu armoured cable
Supply and surface laying of 4C x 1 sq.mm unscreened cu armoured cable
Supply & fixing of 25MM dia MS Conduit including fixing accessories.
Supplying, Installing, Testing & Commissioning of suitable desk top(Computer) including all required accessories for supporting BMS.
Shifting of following IT components(DC migration) from existing Data Center to proposed data center at same area including disconnecting from existing racks and re-connecting to the new racks in co-ordination with HAL and their agency.
Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:
12 way (4+36) Double door VTPN MCCB DB
8 way (4+24) Double door VTPN MCCB DB
6 way (4+18) Double door HTPN MCB DB
16 way SPN Double door MCB DB
125 A, 36KA, FP MCCB
200 A, 36KA, FP MCCB
63 amps. ratings , TP MCB, "C" curve, 10 KA breaking capacity.
63 amps. ratings , 4P MCB, "C" curve, 10 KA breaking capacity.
Supply and fixing 6A to 32 A rating, SP 214V 10kA, "C" curve, miiniature circuit bracker suitable for inducive load in the exesting MCB DB complete with connections, testing and commessioning etc., as required.
Supply and fixing 6A to 32 A rating, DP 214V 10kA, "C" curve, miiniature circuit bracker suitable for inducive load in the exesting MCB DB complete with connections, testing and commessioning etc., as required.
Supply, fixing in flush with the false ceiling including suitable fixing arrangment using Chain links, testing & commissioning of recess mounting type square LED lighting fixture of wattage not exceeding 36watt made out of white powder coated CRCA housing/ aluminium housing, front frame with translucent /polycarbonate cover including control gear. The luminaire should have Lumen efficacy ≥100 lm/watt and lumen output not less than 3600lumens with PF >0.9 and Colour temperature shall be ≥5700K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer incharge. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminaires & LM80 certificate for LED shall be produced.The LED Light fixture shall be of Crompton model no:LCTLRNE-36W-FO-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.
Supply and fixing on in flush with the false ceiling as per site requirement testing & commissioning of round type recess/surface mounted LED downlighter with PDC aluminium housing and high translucent frosted plastic diffucer makes it a robust luminaire, wattage not less than 18W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, effficent heat sink, Colour temprature shall be ≥5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. 79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. Crompton model no: LCDSPLN-R-18-CDL/LCDSPLN-S-18-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.
Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten LED light fittings (four feet) of wattage not exceeding 40W made out of aluminium extruded Housing integrated LED batten, equipped with 4kv in-built surge protection, IP20 Protection rating including control gear. The luminaire should have Lumen efficacy ≥110/120 lm/watt and lumen output not less than 4400/4800lumens with PF >0.9 and Colour temperature shall be ≥5700K, operating on single phase 240V voltage 50 Hz AC supply with voltage range 150-275V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer incharge, offered model shall of Crompton model no:CIS-305-40-57-SL-DP-NWH/equivalent model of other approved makes. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminaires & LM80 certificate for LED shall be produced.
Supply & fixing to ceiling of Emergency Sinage for Exit
Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)
Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring for circuit / submain wiring along with earth wire with 2 X 2.5 sq. mm + 1 X 2.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(Wiring from Distribution board to Switch box and Switch box to Switch box)
Wiring for light/ power plug with 2x4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sm. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
6A one-way flush type modular SP switch.
16A one-way flush type modular SP switch.
6A, 3 pin flush type socket outlet.
16A, 6 pin flush type socket outlet.
Supplying and fixing following Modular base & cover plate (coloured or white as decided by OIC/EIC) on existing modular metal boxes etc. as required.
1 or 2 Module
3 Module
6 Module
8 Module
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding plate as required
Supplying and fixing of follwing size GI box in flush with wall including cutting the wall and making good finish with same.
Modular GI box for 1/2 module
Modular GI box for 3 module
Modular GI box for 6 module
Modular GI box for 8 module
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
20MM PVC Conduit
25MM PVC Conduit
Supplying & testiing of following size and conductor XLPE/PVC insulated Un-armoured power cable of 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment including stacking at site, proper storage complete etc. as required
4CX 50 Sqmm Copper Un-armoured conductor
4CX 16 Sqmm Copper Un-armoured conductor
3CX 6 Sqmm Copper Un-armoured conductor
3CX 4 Sqmm Copper Un-armoured conductor
Laying and fixing one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on cable tray as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
Upto 35 sq. mm and upto 95 sq. mm (clamped with 23x3mm thick MS flat clamp)
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required
Supplying and making end termination of 4CX 50 Sqmm Copper Un-armoured conductor
Supplying and making end termination of 4CX 16 Sqmm Copper Un-armoured conductor
Supplying and making end termination of 3CX 6 Sqmm Copper Un-armoured conductor
Supplying and making end termination of 3CX 4 Sqmm Copper Un-armoured conductor
Supplying and fixing of Hot dip galvanised Perforated type cable tray of following sizes, steel: As per IS:2062 / 1079, Galvanising : As per IS: 2629 / 4759 including all accessories like base slotted angle , horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners etc.
Supplying and fixing of 300 x 50 x 1.6 mm size Hot dip galvanised Perforated type cable tray
Supplying and fixing of 150 x 50 x 1.6 mm size Hot dip galvanised Perforated type cable tray
Telephone
Supplying and fixing of twin RJ 11 Telephone socket outlet on the existing modular plate & switch box including connections but excluding modular plate & box etc. as required.
Supply & drawing of 4 Pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telecommunication cables in the existing surface / recessed PVC conduit as required.
Supply & fixing of 2nos of 1 Module RJ-45 sockets in Two module plate for Two numbers of Data points on the existing modular plate & switch box including connections but excluding modular plate & box etc. as required.
Supply and drawing of UTP 4pair CAT 6 LAN Cable in the existing surface / recessed PVC conduit as required.
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
Supplying and fixing 32 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 32 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
Supply, fixing on wall/grouting to floor 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer, testing and commissioning of 125A 4P 415V gr. MCCB in a factory built powder coated sheet steel enclosure, MCCB shall be adjustable with thermal settings (80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED module etc. complete in all respects. including suitable cable end box(incoming/outgoing) wherever necessary complete in all respects and as directed by Engineer-in-charge. (scope includes MS frame work as per requirement)
Supply, fixing on wall/grouting to floor 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer, testing and commissioning of 200A 4P 415V gr. MCCB in a factory built powder coated sheet steel enclosure, MCCB shall be adjustable with thermal settings (80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED module etc. complete in all respects. including suitable cable end box(incoming/outgoing) wherever necessary complete in all respects and as directed by Engineer-in-charge. (scope includes MS frame work as per requirement)
Earthing
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supplying & laying 25 X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)
Supply & fixing of Earth Terminal Boxes with necessary accessories
Supply & drawing/laying of 1C X 16 Sqmm PVC insulated 1100V gr. flexible multi stranded Copper cable with ISI mark for Racks earting using suitable copper lugs including necessary interconnections, clamps & hardwares complete as directed by Engineer -in-charge.
Supply & drawing/laying of 2C X 10 Sqmm PVC insulated 1100V gr. flexible multi stranded Copper cable with ISI mark for DB's earting using suitable copper lugs including necessary interconnections, clamps & hardwares complete as directed by Engineer -in-charge.
Safety equipments
Supply of first aid kit & safety charts
Supply and installation of Wooden framed glass fronted shock treatment chart as per IE rules fixed to wall.
Supply and installation of Single Line Diagram for the New Data center with wooden frame work.
Supply, Installation, Testing and commissioning of 35kw capacity Precision Air conditioning system, DX based In row cooling unit with required accessories. The scope includes Low side works which includes outdoor unit stand, loading & unloading, Refrigerent hot gas and liquid line copper pipe including thermal insulation, First charge of R 410A or R32 refrigenent gas as per OEM requirement, Power and control cable between outdoor and indoor units, suitable size fresh water and Drain CPVC pipe including insulation, complete in all respects as per technical specification and as directed by Engineer-in-charge.
Supply and installation of Cold Aisle Containment with 2 tile, sliding Door, toughened glass & blanking panel. Provisioned for 12Nos 42U Racks(800x1200x2100) & 3 Nos inrow cooling units and its accessories. The scope includes 1no of suitable width (full height) vertical dummy panel as per site requirement., complete in all respects as per technical specification and as directed by Engineer-in-charge.
Supply, Installation, Testing and Commissioning of minimum 2.0 TR nominal capacity invertor DX-Type 4-way Cassette units (Indoor and Outdoor Unit) with two / three speed evaporator fan motor, cooling coil and insulated drain pan with factory installed drain pump complete with cordless remote control along with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, R32/R410a/407c refrigerant, including fixing the outdoor unit as per manufacturers recommendation and fixing of indoor unit on ceiling, charging of refrigerant gas, MS stand/frame for ODU , any structural supports for Indoor units,outdoor vibration isolators,suitable stabilizer etc.The scope includes Refrigerent hot gas and liquid line copper pipe including thermal insulation, complete in all respects as per technical specification.
Disposal of surplus earth/moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material of concrete/bricks, of partitions,ceiling boards,tiles,frames etc by mechanical transport including loading, transporting, unloading in all lifts/loads upt 10 km distance from HAL. completely as per directions of Engineer-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc.,all complete as directed by Engineer-incharge.
Supplying, mixing and placing plain cement concrete (1:4:8) (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate) of required thickness using 40 mm down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge.
Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20 mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge.
Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note : a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry. c) BBS as per the site requirement to be submitted to EIC before placing order for steel.
Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.
All works upto plinth level like footing,pedetsal,piles,plinth beam,including necessary openings and packing if any for laying pipes, cables etc.
All works above plinth level column, beams, slabs, canopy, chajja, stairscase etc. level including necessary openings and packing if any for laying pipes, cables etc.
Formwork by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc as per drawing., all complete as directed by the Engineer-in-Charge Note :Formwork material is contractor's own property and shall be removed after completion of work.
Foundations, footings, bases of columns/pedestal,for mass concrete etc.
Suspended floors, roofs, landings, balconies and access platform.
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes with cement mortar 1:6 (1 cement : 6 coarse sand) including curing,leveling and making groove sto mortar jopints with stagging and supports,all as per the instrcutionof Engineer Incharge.
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt of Wedge expansion type etc complete as per direction of Engineer-in-charge.
Fastener with threaded dia 6 mm each 30.75
Fastener with threaded dia 10 mm each 33.80
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters.The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire ratedglazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge .
Providing and fixing 60 mm thick glazed fire resistant door shutters(Single/double) of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999,tested and certified as per laboratory approved by Engineer-in-charge,with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size100x89x3mm of approved make, including all accessories/fixtures to operate and including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet(zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited labor by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shallnot be more than 1100x2200 mm (w x h) or 2.42 sqm.
Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).complete as per direction of Engineer-in-charge.
Providing and fixing panelling with 5.0 mm thick float glass panes (weight not lessthan 12.50 kg/sqm) or glazing for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).
Providing and fixing factory made Three track three panels uPVC sliding glazed window upto 1.50 m in height dimension comprising of lead free uPVC multi-chambered frame,sash and mullion/coupler(where ever required) extruded profiles having minimum wall thickness of 2.10mm with frame (98mm x 40mm) & both glazed and fly screen sash (30mm X 55mm) with zinc alloy powder coated handle on every glazed panel along with multi-point locking system confirming to EN:12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads,interlocks and inline sash adaptor (where ever required) of approriate dimension, EPDM gasket, hadrwares,SS304 fastners of minimum 8mm dia with countersunk head,comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS1367:Part I to 14,Plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame,sas & mullion shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.(Glass to be paid separately)
Supply,fabricating and erecting Structural steel work riveted, bolted or welded in built up sections, trusses and framed works, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete upto 10m height. All as per the instruction of Engineer Incharge.
Providing and laying Polished Granite stone flooring and stair case raiser/partitions/divider and steps in colour non Black, Cherry/Ruby Red or Equivalent in required design and patterns, in linear as well as curvilinier portions of building as complete as per the architectural drawings/Site condition with 18mm thick stone slab or 20mm (average) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand) laid and jointed with cement slurry and pointed with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing.nosing,chamfering and making grooves etc., complete as per direction of Engineer-in-charge.
Providing and fixing removable raised/false access flooring at 450 mm Finished Floor Height (FFH)with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings,as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.
Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A of approved brand, on wall face including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .complete as per direction of Engineer-in-charge.
Providing and fixing Single socketed pipes of 75mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall face including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.complete as per direction of Engineer-in-charge.
Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness of approved pattern on cement mortar of 20mmthcikness with CM(1:4) including leleving,curing and finsihing the work as per the Instrcution of EIC.
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern onon cement mortar of 20mmthcikness with CM(1:4) including leleving,curing and finsihing the work as per the Instrcution of EIC.
Plastering to internal brick/block wall with 15 mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling,curing and making the level smooth and at all heights, plaster drip course/ groove in plastered surface or moulding to R.C.C. projections and execute the work complete as per direction of Engineer-in-charge.
Plastering to ceiling with 12 mm thick on the rough side with cemnet mortor (1:4) including leveling,curing and making the level smooth and at all heights and execute the work complete as per direction of Engineer-in-charge.
Plastering to external brick/block wall with 18 mm cement plaster in two coats under layer 12 mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).including leveling,curing and making the level smooth and at all heights, plaster drip course/ groove in plastered surface or moulding to R.C.C. projections and execute the work complete as per direction of Engineer-in-charge.
Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams/ litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand,complete as per direction of Engineer-in-charge.
Providing and finishing old walls in two or more coats with Premium Acrylic Smooth exterior paint with Silicone additives of approved brand of required shade @ 1.43 ltr/ 10 sqm over existing cement paint surface after Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per direction of Engineer-in-charge.
Providing and Finishing walls with Acrylic Smooth exterior paint of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including scrapping,preparationof surface for completing the work as per direction of Engineer-in-charge.
Providing and applying synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in One or more coats on old work by cleaning and srcapping to make the surface smooth before appling paint.complete as per direction of Engineer-in-charge.
Providing and applying synthetic enamel paint for structural members,supports ,grills,Gates in Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture,filling joints,patti etc ,complete as per direction of Engineer-in-charge.
Providing and applying two coats of fire retardant paint on finished wall surface & door shutter surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.All complete as per the instrcutionsof Engineer Incharge.
Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, stacking serviceable and unserviceable material separately including cutting reinforcement bars,after making temporary proetction for existing service lines.complete as per direction of Engineer-in-charge.
Demolishing brick work with cement mortar manually/ by mechanical means, after disconnecting the electrical service and AC lines if any, including stacking of serviceable material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL.complete as per direction of Engineer-in-charge.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix)and including stacking material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL,after making temporary proetction for existing service linescomplete as per direction of Engineer-in-charge.
Dismantling doors, windows,partitions, and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below, including stacking material and handing over the useful materials to HAL maintenance department and disconnecting the service lines if any all as instructed by Engineer Incharge.
Dismantling/removing tile work (for thickness of tiles 10mm to 25mm.) of in floors and in walls laid in cement mortar after disconnecting the electrical service and AC lines if any,including stacking material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, complete as per direction of Engineer-in-charge.
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
Providing and fixing G.I. chain link fabric Made of G.I. wire of dia 4 mm fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators,and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, filling up the gaps at junctions, with dash fasteners and EPDM rubber/neoprene gasket,required accessories for operational, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
Providing and fixing 12 mm thick Pre-laminated particle board with decorative laminationon one side and balancing lamination on other side flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screwsetc. complete as per architectural drawings and directions of engineer in-charge.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete as p[er the instrcution of EIC..
Providing and fixing mineral fibre false ceiling tiles (of approved brand/make) with 16 mm thick beveled tegular edge with (NRC 0.55 to 0.60) at all heights of size 595X595mm of approved texture,design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%,Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-In-Charge.
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of minimum Size 595x595mm or available standard size of approved texture, design and patterns as per CPWD Specification 2019 With 15 mm thick tegular/butt edged without perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801and ASTM G-21, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm,suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in Charge.
Godrej Make PISA 3 Seater Sofa or Equivalent in Durian with Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric, also available in Rich Black Leatherite
Godrej Make PISA 2 Seater Sofa or Equivalent - in Durian Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric, also available in Rich Black Leatherite.
Godrej Make Aero Large Seat Depth (Mid Back) or Equivalent in Durian with overall details as indicated below: SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The ply and foam should be designed with contoured lumber support for comfortable seating posture. BACK SIZE 48cm.(W) X64.5cm.(H) SEAT SIZE 51.0cm.(W) X 48.0cm.(D) Enhanced Mesh Back, Enhanced 1 D Adjustable Armrests, Knee Tilt Synchro Mechanism with 4 pos lock, Nylon pedestal.
Godrej make Centre Table or Equivalent in Durian - SS Under structure and top with Toughened Glass of drak colour.
Comprehensive annual maintenance of New Data Center (except IT Components ) and Operation Engineers ( 4nos - 3shift with one releaver ) - For three years as per the scope of work, Terms and conditions enclosed in Tender Technical Specification Page No.128-138
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
PQ_Freeview.pdf
TENDER_DOCUMENT • 0.21 MB
PB_Freeview.pdf
TENDER_DOCUMENT • 0.23 MB
Tender_Drawing_No_3.pdf
TENDER_DOCUMENT • 0.47 MB
Tender_Notice_EC2928.pdf
TENDER_DOCUMENT • 0.13 MB
Technical_Bid_EC2928.pdf
TENDER_DOCUMENT • 2.47 MB
Tender_Drawing_No_5.pdf
TENDER_DOCUMENT • 0.47 MB
Tender_Drawing_No_4.pdf
TENDER_DOCUMENT • 0.62 MB
Tender_Drawing_No_1.pdf
TENDER_DOCUMENT • 0.31 MB
Tender_Drawing_No_2.pdf
TENDER_DOCUMENT • 0.16 MB
Amendment_No_1.pdf
TENDER_DOCUMENT • 0.18 MB
Check_List_EC2928.pdf
TENDER_DOCUMENT • 0.03 MB
ECS_Formet.pdf
TENDER_DOCUMENT • 0.01 MB
PQEC_2928.xlsm
TENDER_DOCUMENT • 0.04 MB
Undertaking_Letter.pdf
TENDER_DOCUMENT • 0.02 MB
Price_Bid_EC2928_.xlsm
TENDER_DOCUMENT • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .