Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹67.1 LAccepted-AOC 65 RANJEET NAGAR NEAR SAI HOSPITAL AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹68.3 L+₹1.0 L (1.53%)Rejected-AOC KOTHI NO 901 2ND FLOOR PHASE 3 B2 SAS NAGAR MOHALI 160109 | MOHALI | SAHIBZADA AJIT SINGH NAGAR | PUNJAB | 160109 | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹70.5 L+₹3.2 L (4.70%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹77.1 L+₹9.8 L (14.6%)Rejected-AOC H NO 982 SECTOR 16 STREET NO 17 SARASWATI VIHAR DERABASSI DISTT SAS NAGAR PB 140507 | S A S NAGAR | PUNJAB | 140507 | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹94.0 L+₹26.7 L (39.7%)Rejected-AOC 52 IDC HISAR HARYANA 125005 | HISAR | HISAR | HARYANA | 125005 | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
30 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Chandigarh
HQ CWE (AF) Chandigarh PIN-160003
REPAIR, RESURFACING TO EXISTING ROADS AND ALLIED REPAIRS IN TECHNICAL AND DOMESTIC AREA UNDER GE (AF) CHANDIGARH
2023_MES_592774_1
CWE/AF CHD/CHD/T-01/2023-24
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per NIT
7 documents required · 7 mandatory
₹1,000
GE(AF) Chandigarh
₹1.6 L
16 Jun 2023
2 May 2023
6 Jun 2023
2 May 2023
30 May 2023
16 May 2023
Amount
Material and labour for repair to pot holes, depth not exceeding 30mm and area not exceeding 1.0 Sqm each, including sweeping free from dust and mud or water, scoring sunken surfaces of road, cutting around edges to at least 25mm in depth, making good by applying paving bitumen (VG-10) @ 5kg per ten sqm, putting in premixed bituminous macadum, well rammed and sealed with binder 6.8Kg/10 Sqm blinded with 0.06 Cum of stone chipping 6.3mm size and again well rammed / rolled to uniform smooth surface, complete all as specified and directed.
Material and labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dust & dirt etc. including draining off water if any from pot holes, complete all as specified and directed.
Material and labour for applying evenly a priming/tack coat with paving bitumen (VG-10 grade) @5Kg/10Sqm with mechanical sprayer on black top surfaces, complete all as specified and directed.
Material and labour for premixed bituminous macadam using paving bitumen (VG-30 grade) @ 4% by weight of total mix using 12 to 25mm graded crushed preheated stone aggregate, laid, rolled and compacted with 8 to 10 tonne power roller to required gradient & camber, consolidated thickness 75mm or less, complete all as specified and directed.
Material and labour for premixed semi dense asphaltic concrete 30 mm thick consolidated thickness, using combined graded aggregate i.e. crushed stone coarse aggregate, fine aggregate (sand) & filler (inherent filler/OPC 43 grade) of physical properties as specified (refer SSR Part-I of 2009), pre-heated, mixed with 4.5% to 5.5% binder content by weight of total mix using VG-30 grade bitumen, laid with mechanical paver, rolled & compacted to a uniform smooth surface with 8 to 10 tonne power road roller, complete all as specified and directed. Notes:- (i) Thickness of semi dense asphaltic concrete and quantities of materials as mentioned in particular specifications/SSR are the minimum. The quoted rate shall also be deemed to include for provision of more materials in comparison to those mentioned/specified in the item, if required, to achieve the required level, gradient, camber and shape all as directed by the GE. (ii) Hot mix plant of adequate capacity shall be used for heating and mixing crushed stone coarse aggregate, fine aggregate and binder (bitumen). Semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver all as directed by the GE. (iii) Contractor’s quoted rates shall be deemed to include all these aspects.
Material and labour for painting 2.5mm thick with thermoplast fluorescent paint of colour white or golden yellow or any other shade conforming to BS standard 3262 with 20% glass beads (inter mixed) applied hot with automatic (commercial) machine drive in strips after preparation of surfaces as per manufacturer’s instructions & according to the specifications laid down by IRC & MOST (Ministry Of Surface Transport)- Specifications 2001 (4th revision), making lines, broken lines/dashes, arrows etc. on roads and other like surfaces not exceeding 10 cm in width or girth, complete all as specified and directed.
Supply and fixing cat eye solar reflector type, of metal body alloy, of size 100mm x 100mm x 20mm, with PAMA strip lens reflector, fixed with and including MS stud of suitable size as per manufactures instructions fixed in repair/replacment complete all as specified and directed. Make-Dark Eye model No DA - 972 or equivalent in 3M/Tata BP solar as approved by GE
Supply and fixing solar cat eye aluminum alloy shell (100% water proofing design ) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions fixed in repair/replacment complete all as specified and directed. Make- Dark Eye Model Kohinoor or equivalent in 3M/Tata BP solar as approved by GE
Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600 mm height duly powder coated and provision of thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 fixed in repair/replacmentcomplete all as specified and directed. Make-Dark Eye/3M/Tata BP solar dark eye.
Demolition of cement concrete (un-reinforced) n exc 15cm thick as in ground floor/ paving and removal of debris outside MoD land, complete all as specified and directed.
Material and Labour for PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregates, as in coping, apex stone, kerb stones, etc including weathering, slightly rounded or chamfered angle and throating, including necessary form work and setting in cement mortar 1:4 complete all as specified and directed.
Material and labour for applying two coats of exterior emulsion paint (Apex) over a coat of primer on new concrete surfaces over 10cm girth or width in blue & white or yellow & black shade complete all as specified and directed by Engineer-in-charge.
Material and labour for applying two coats of exterior emulsion paint (Apex) on old concrete surfaces over 10cm girth or width in blue & white or yellow & black shade complete all as specified and directed by Engineer-in-charge.
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base of floors, complete all as specified and directed.
Material and labour for Chequered cement concrete tiles 30cm x 30cm x25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
Material and Labour for PCC (1:3:6) type C-1, using 20 mm graded crushed stone aggregates, as in roof kerb, mud stops, etc including weathering, slightly rounded or chamfered angle and throating, including necessary form work, complete all as specified and directed.
Note: The Total amount shall subject to adjustment of credit of Rs. 23,050.00 for old Materials as per Schedule of Credit
M/s VARINDER PAL SINGH AND CO
shree balaji builders
jmv engineers
SNG BUILDERS AND ENGINEERS
Baba Engineers and Contractors
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .