Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹9.1 L+₹1.8 L (24.5%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder |
Tender Value
₹9.3 L
EMD Value
₹19,000
Closing Date
4 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) NIMU
AGE (I) NIMU PIN-901312 C/O 56 APO
PROVN OF STORE ROOM, TOILET BLOCK AND REFURBISHING OF WATING ROOM AT NIMU UNDER AGE(I) NIMU
2023_MES_587891_1
AGE(I)/NIT-40/2022-23
Open Tender
Support/Maintenance Service
Item Rate
180 days
NIMU
Class E Cat a(i)
9 documents required · 9 mandatory
₹500
AGE (I) NIMU
₹19,000
3 Oct 2023
31 Mar 2023
6 May 2023
31 Mar 2023
4 May 2023
15 Apr 2023
Amount
B&R Items
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying of pipes etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard / dence soil, complete all as specified & directed.
Plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.
Precast cememt concrete block masonary with solid blocks type-C-1 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.
75mm thick Cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub-base in floor finishes, complete all as specified and directed by Engr-in-charge.
25mm thick cement concrete typeB-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in sub base in floor finishes, complete all as specified and directed by Engr-in-charge
2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed by Engr-in-charge.
Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed by Engr-in-charge
TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire (annealed) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
TMT bars of 6 and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire (annealed ) not less than 0.9mm dia, complete all as specified and directed by Engr-in-Charge.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished concrete surface, complete all as specified.
Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, for flat rough surface, complete all as specified and directed by Engr-in-Charge.
Reinforced cement concrete 1:2:4, (nominal mix) type B-0 (using 12.50 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass, complete all as specified and directed by Engr-in-Charge.
Reinforced cement concrete 1:2:4, (nominal mix) type B-0 (using 12.50 mm graded crushed stone aggregate) as in beams, cantilevers, bressumm ers, lintels over 1.5m span, complete all as specified and directed by Engr-in-Charge.
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410W (Gde E-250) quality A, complete all as specified and directed by Engr-in-Charge.
Two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed, complete all as specified and directed by Engr-in-Charge.
Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.
Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in epoxy mortar and pointed in white or coloured cement to match over and including 15mm thick screed bedding layer in CM 1:6, complete all as specified and directed by Engr-in-Charge.
Rendering 10mm thick plaster on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
Preparation of new plastered surfaces and applying three coats of white wash on walls, complete all as specified and directed by Engr-in-Charge.
Glazed ceramic tiles 300x200x 6 to 7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3, complete all as specified and directed by Engr-in-Charge.
Rendering 15mm thick plaster on fair faces of brickwork or concrete surfaces in cement mortar (1:4) with WPC and finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. (Note : WPC will be measured and paid separately).
Supply only water proofing compound, complete all as specified and directed by Engr-in-Charge.
Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed by Engr-in-Charge.
2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engr-in-Charge.
Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engr-in-Charge.
Extruded aluminium alloy handles, 150mm size, fabricated type, anodised, complete all as specified and directed by Engr-in-Charge.
Aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed, complete all as specified and directed by Engr-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm size of extruded sections and fixed, complete all as specified and directed by Engr-in-Charge.
2nd class hardwood 30mm thick glazed and skeleton shutters open rebated and prepare to receive glass, gauge etc divided in squares with plain chamfered or rounded, mitered and rebated with sash bars and provided in windows, ventilators and stiles and rails size of members of shutter as specified in SSR Pt-I Sec 8 clause 8.24(b) supplied and fitted to chowkats, complete all as specified and directed by Engr-in-Charge.
Butt hinges, medium weight, cold rolled mild steel 75 mm long (ISI Mark), fixed, complete all as specified and directed by Engr-in-Charge.
Extruded aluminium alloy handles, 100mm size, fabricated type, anodised, complete all as specified and directed by Engr-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm size of extruded sections and fixed, complete all as specified and directed by Engr-in-Charge.
3mm thk figured glass, pin head type and glazing with oil putty/wooden beading in squares n exc 0.5 sq. m in each pane, complete all as specified and directed by Engr-in-Charge.
Applying two coats of synthetic enamel painting to new surfaces wooden based over a coat of pink primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd, complete all as specified and directed by Engr-in-Charge.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out hard/dense soil, complete all as specified and directed by Engr-in-Charge.
Hard core of broken stone and boulders gauge n exc 60mm deposited spread and level in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified and directed by Engr-in-Charge.
PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) 75 mm thick as in plinth protection, complete all as specified and directed by Engr-in-Charge.
500 Litre capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete, complete all as specified and directed by Engr-in charge..
25mm dia GI nipple suitable for water tank, complete all as specified and directed by Engr-in charge..
15mm bore 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed by Engr-in charge..
20mm bore 3-layer PP-R (polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed by Engr-in charge.
25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engr-in charge.
75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed by Engr-in charge.
75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in charge.
110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed by Engr-in charge.
110mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed by Engr-in charge.
110mm dia PVC (SWR) bends any radius, complete all as specified and directed by Engr-in charge.
75mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed by Engr-in charge.
75mm dia PVC (SWR) bends any radius, complete all as specified and directed by Engr-in charge.
75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified and directed by Engr-in charge.
550x400mm Wash basins, Vitreous China (flat back or angle back type) any size, and 32mm dia brass waste fitting including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed by Engr-in charge.
32mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and directed by Engr-in charge.
15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engr-in charge.
PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engr-in charge.
CP single towel rail 600mm long fixed to wall incl brackets, complete all as specified and directed by Engr-in charge.
Vitreous China urinal, bowl type, flat back, size 465 x 355 x 265 mm, white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engineer-in-Charge.
40mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed, complete all as specified and directed by Engr-in charge.
Vitreous china wash down water closet pan "Pedestal Pattern" white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flush pipe and joint etc and connection to drain, flushing, pipe, anti-syphonage pipe, and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, as complete all as specified and directed by Engr-in charge..
PVC valveless, syphonic action type, flushing cistern of capacity 10 litre, low level, white, with inlet, ball valve, float and handle including brackets and including 32mm dia PVC flush pipe of required length and making connection including bracket, complete all as specified and directed by Engineer-in-Charge.
15mm Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engr-in charge.
15mm bore stopvalve/ Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for nions and fixed, complete all as specified and directed by Engr-in charge.
Returning, filling in excavated soil including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete, complete all as specified and directed by Engr-in charge.
Removing excavated material (soils) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete, complete all as specified and directed by Engr-in charge.
Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Engr-in charge.
Cement Concrete 1:2:4, type B2 (using 40 mm graded crushed stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified & directed by Engineer-in-Charge.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed by Engr-in charge.
Chequered cement concrete tiles 32cm x 20cm x 30mm thick, set, jointed and 20mm thick screen bed CM 1:4 pointed in neat cement slurry in floors with gray cement and no pigment, complete all as specified and directed by Engr-in charge.
25mm thick cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in sub base, complete all as specified and directed by Engr-in charge.
RCC 1:2:4, B-0 (using 12.50mm graded crushed stone aggregate) for chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; complete all as specified and directed by Engr-in charge.
Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) complete, complete all as specified and directed by Engr-in charge.
12mm thick Toughened glass doors with Digital printing & wooden frame with complete fittings, complete all as specified and directed by Engr-in charge.
40mm thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sub base in floor finishes, complete all as specified and directed by Engr-in-charge
Glass dividing strips, 3mm thick, width of strip 28mm, in position, conform to design, complete all specified and directed by engineer-in-charge.
Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.
9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceilling, complete all as specified and directed by Engr-in-Charge.
Plain fillets. exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and directed by Engr-in-Charge.
Anodised aluminium window and ventilator shutters, fixed type with sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc all as specified and directed by Engr-in-charge, complete all as specified and directed by Engr-in-Charge.
5.5mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane, complete all as specified and directed by Engr-in-Charge.
E&M Items
Point wiring with PVC insulated single core cable (FRLS) of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories laid on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable (FRLS) of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board of suitable for housing like switches, sockets, fan regulators etc for One light point/one fan point controlled by one switch, complete all as specified and as directed by Engineer-in-Charge.
Point wiring with PVC insulated single core cable (FRLS) of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories laid on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable (FRLS) of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board of suitable size for housing like switches, sockets, fan regulators etc for One 3 pin 5 amps socket outlet on independent board, complete all as specified and as directed by Engineer-in-Charge.
All as per item No 83 above but with conductor of size 4 sqmm (Nominal area) (FRLS) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm (FRLS) PVC insulated stranded copper conductor Cable, complete all as specified and as directed by Engineer-in-Charge.
Switch piano flush type 5 Amp, single pole, one way, complete all as specified and directed.
Switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed.
Switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal, complete all as specified and directed.
Ceiling rose surface Bakelite 65x50mm two to three terminal, complete all as specified and directed.
Basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories, complete all as specified and directed.
LED post top gate light 15 Watt spun aluminium luminare with high power LED including all accessories, complete all as specified and directed.
TSEWANG DORJAY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .