CIVIL 2026

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

1:2:4 (1 Cement: 2 coarse sand (zone-Ill) derived from natural sources:4gradedstoneaggregate20mmnominalsizederivedfrom natural

Half brick masonry with common burnt clay F.P.S. (non modular) bricksofclassdesignation7.5insuperstructureaboveplinthlevelup to floor V level

Cementmortar1:4(1cement:4coarsesand)

Extraforprovidingandplacinginposition2Nos6mmdia.M.S.bars at every third course of half brick masonry

Providing fabricating and fixing factory made uPVC doors/windows conforming to relevant IS/EN standards, complete with frame, sash glazing,hardware,gaskets,reinforcement,fixingaccessories,sealing and making goods the jambs complete in all respects as per drawings

Second class teak wood

Providing and fixing flat pressed three layer particle or graded plain wood board medium density exterior grade (Grade I) FPT-I,

12mmthick

Providing and fixing ISI marked flush doors hutters conforming to IS

35mmthickincludingISImarkedStainlessSteelbutthingeswith necessary screws

Extraforprovidinglippingwith2ndclassteakwoodbattens25mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing bright finished brass 100mm mortice latch and lockwith6leversandapairofleverhandlesofapprovedqualitywith necessary screws etc. complete.

Providing and fixing aluminium die cast body tubularype universal hydraulic door closer (having brand logo with ISI, IS : 3564,

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sashand mullion/coupler (where ever required) extruded profiles having minimumwallthicknessof1.70mmforSeriesR1andR2profilesand 2.10mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour And design duly reinforced with galvanized mild steel section made of renaired shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade

Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zannak) powder coated handles.

UsingR1 series with frame(33mm&above) x(35mm&above) & sash/ mullion(33mm&above)x(50mm&above).(Height up to 0.90 metre).

Providing and fixing bright/matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete

Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4(1cement: 4coarsesand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and

Glazed Vitrified tiles Matt/Antis kid finish of size

Size of Tile 600 x600mm

Grouting the joints of flooring tiles having joints of 3 mm width,

SizeofTile600x600mm

15mmcementplasteronroughsideofsingleorhalfbrickwallof mix:

1:6(1cement:6coarse sand)

6mmcementplasterof mix:

1:3(1cement :3finesand)

Providing and applying white cement based putty of average thickness1mm,ofapprovedbrandandmanufacturer,overthe

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying

Two coats

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing suficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade mel a mine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion using melamine clear polish and melamine thinner mixed in required. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compress or pressures pray gun using

Demolishing cement concrete manually/ by mechanical means includingdisposalofmaterialwithin50metresleadasperdirection of Engineer - in - charge.

Nominalconcrete1:3:6orrichermix(including equivalent design mix)

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/by mechanical means in R.C.C.orR.B. work(Payment shall be made on the cross sectional area of R.C.C.or R.B.work) as per direction of Engineer-in-charge.

Demolishing brick work manually/by mechanical means including S or king of serviceable material and disposal of unserviceable

In cement mortar

Dismantling doors ,windows and cleres tory windows (steel or wood)

O fare a 3sq.metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 8mmto25mm

Dismantling stones lab flooring laid in cement mortarin cluding stacking of serviceable material and disposal of unserviceable

Dismantling C.I.oras bestosrain water pipe with fittings and clamps including stacking the material within 50 metres lead :

100mmdiapipe

Dismantling of flushing cistern of all types(C.I./PVC/Vitrious

Dismantling old plaster or skirt in graking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material

Providing and fixings oil,waste and vent pipes:

100 mm dia

Hubless centrifugally cast (spun)iron/ pvc pipes epoxy coated inside &outside IS:15905/

Providing and fixing M.S. holder-bat clamps of approved design to Sand Castiron /castiron/ pvc(spun) pipe embedded din and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement: 2

For100mmdia pipe

Providing and fixing bend of required degree with a , insertion rubber washer 3mm thick, bolts and nuts complete.

100 mm dia

Hubless centrifugally cast(spun) iron epoxy coated inside &outside as per IS: 15905

Providing and fixing plain bend of required degree.

100 mm dia

Hubless centrifugally cast(spun) iron pipes epoxy coated in side& outside IS:15905

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe

100 mm dia

SS304gradecouplingwithEPDMrubbergasket

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

100mminletand100mmoutlet

*less centrifugally cast(spun)iron epoxy coated in side & out side as per IS: 15905

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC)pipes,

25mm nominal dia Pipes

32mm nominal dia Pipes

50mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15mm nominal dia Pipes

20mm nominal dia Pipes

(mailto:[email protected]塹ᴻ䡿ⲯ嶂藄挧ꮥ)

Providing and fixing false ceiling at all heights with integral densifiedcalciumsilicatereinforcedwithfibreandnaturalfillerfalse ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per 2225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-

With15mmthickintegraldensifiedmicroedgelightweightcalcium silicate false ceiling tiles

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, unloading to C & D waste management site near Jahangir Puri Safai Karamchari Quarters at Burari plant or Shastri Park or Mundaka,NewDelhibeyond50minitiallead,forallleadsincluding all lifts. The processing fee of C & D Management at prescribed rates shall be submitted by the agency along with each running final bill and the same shall be reimbursed by the department on the production of original cash receipts. Note:-The payment of this Item shall be made only when the verified copy of processing fee shall be attached with the bill.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer- in-charge.

Providing and fixing32mm size Bottle Trap (with internal partition) of 300mm and 190mm long wall connection pipe and wall flange (ModelNo.ALD-BCH-769L250x190)of Jaquar or equivalent make

Providing and fixing C.P. brass Hand Shower (Health Faucet) with 8mmdia1.20mlongFlexibletube&wallhookofapprovedquality

Providing and fixing White/ Smoked Push button liquid Soap Dispenser (ModelNo.SDR-WHT-DJ0010FN) of Jaquar make or equivalent etc. complete as per direction of Engineer-in-charge.

Providing and fixing Rimless/Rim Bowl With Cistern For Floor Mounted WC With PP Soft Close Seat cover, Hinges, Dual Flush CisternFitting,AccessoriesSet,Size:380x650x730mmofJaquar make(Cat.No.FLS-WHT-5353PPZ)or equivalent complete as per

Providing and fixing to welring square with round flans(Model No.ACN-1121N) Continental bath accessories of Jaquar or equivalent brand & manufacture all complete as per direction of Engineer-in-charge.

Providing and fixing Toilet Paper Holder with Cover of Jaquar Make (Cat. No. AHS-1551) complete as per direction of Engineer-in- charge. Of Jaquar Make (Cat. No. AHS-1551) or equivalent

Providing and fixing C.P.brass angular stopcock with wall flange (Model No.ARI-39053) of Jaquar or equivalent brand for basin

Providing and fixing C.P. brass 2 Way Bib Cock with Wall Flang (Cat.No.DRC-37041) of Jaquar Make or equivalent complete as pe the direction of Engineer-in-charge.

Providing and fixing superior quality frameless looking mirror wit heavy duty Stainless Steel Stud of Size 25mmx25mm or more approved make all complete as per direction of Engineer-in-Charge

Providing and fixing Ist quality High Gloss Double Charge/ Full bodylVitrifiedTilepolishedfinishofsize600mmx1200mmWall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in colors as approved by Engineer-in-Charge,in skirting, risers of steps and dados, wall over 12mmthick impf cement mortar1:3 (1 cement: 3 coarses and) and jointing with grey cement slurry @ 3.3kg per sqm, including

Providing and fixing 6mm thick float glass in uPVC windows, ventilators and partition etc .including all accessories as required all

Providingandfixing15mmC.P.brassPressmatic/Taps Pillar Cock Auto Closing System(Cat.No-PRS-CHR-031)of Jaguar Make or equivalent complete as per the direction of Engineer-in-charge.

Providing and fixing of Toilet cubical of any size & shape as approved by Engineer-in-Charge (of following standard dimensions which includes 600mm door size width) made up of thermosetting resin treated high pressure ,self supporting decorative compact laminates with permanently incorporate anti-bacterial agents (under JIS Z2801:2000 certification) during manufacturing Compact board should be resistant to water immersion through permissible increase on thickness and mass <0.60% and board density >1.35kg/cm3 and ful fill the criteria of green guard gold certification and manufactured under EN438-2&3:2005 standard. 12mm thick compact board shall be moisture resistant, impact resistant, termite resistant ,scratch resistant ,weather and climatic shock resistant. Finish of compact laminates should be suede finish which includes door, pilasters and intermediate panels finished with approved texture/shades as per IS2046 and fulfill the criteria of fire retardant under BS-476/97 and EN438-6 with classification of BSDO standard. Pilaster to be supported with stainless steel grade 316 adjustable foot and intermediate panels will attached to the wall with the help of approved stainless steel (grade 316) channels and all required hard ware ,made of stainless steel as manufacturer's specification like Door knobs, gravity hinges, Thumb turn lock sets with occupancy indicators, coat hooks with door stoper, U channel, top rail with corner connector, adjustable foot/pedestal, Rubber noice deafening Tape ,screw & wall plugs should be approved under the instruction of Engineer-in-charge

The top fitting should consist of stainless steel round top rail which will get fixed with pilaster with stainless steel panel tube holder & stainless steel corner bend (Connected with top rail) will be use in corner of cubical in absence of brick wall, stain less steel wall fixing shall be used only on the wall which will hold the stain less steel top r act All screw will of 304 grade in stainless steel with satin finish. All pilasters are supported by stainless steel bottom cladding. The

Providing and fixing Counters in toilets made of Dupoint/Staron SolidSurfaceCoriansheet12mmthickofDuneprimecolourasper required shape and size as per direction of engineer in charge. The cost includes farma, cutting, hole making, corian cutting in size, grinding, buffing and fixing charge at site all complete as per direction of the Engineer-in-charge.

Credit for Old M.S. Flat/doors windows/reinforcement/steel, bar/ trusses and other structure steel sections/ CGI Sheet/Profile sheet, GI/CI pipes etc.

Credit for Old Aluminum Window Frame ,Door Frame & Door etc. (actual weight measured at the site)