PERIODICAL SERVICES, TILING, PLASTERING, PLUMBING, JOINERY AND ALLIED WORKS TO OTM ACCN UNDER AGE BR-II OF GE (I) RndD (WEST) C V RAMAN NAGAR, BENGALURU

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for; and disposing of debris outside MD land complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and disposing of debris outside MD land complete all as specified and as directed.

Demolition of reinforced cement concrete as in cover slabs and in any position not otherwise specifically provided for and disposing of debris outside MD land complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water, etc., and disposing of debris outside MD land complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.5 sq m each all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening exceeding 1.5 sq m, but not exceeding 4 sq m each all as specified and as directed.

Taking down shutters of any description of area exceeding 1 sq m and not exceeding 2 Sq m each complete all as specified and as directed.

Taking down unserviceable steel windows with frame without taking of shutter (double leaf/triple leaf shutter with frame i.e. fly proof and glazed) from the frame not exceeding 0.6 Sq m each except grill, including glass panes, mosquito proof mesh complete all as specified and as directed.

Taking down unserviceable steel windows with frame without taking of shutter (double leaf/triple leaf shutter with frame i.e. fly proof and glazed) from the frame exceeding 0.6 Sq m each and not exceeding 3 sq m each except grill, including glass panes, mosquito proof mesh complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Repair / Re-securing, easing, adjusting & re-fixing door shutters of any description in the same opening after laying of tiles, area of shutter exceeding 1 sq m but not exceeding 2 sq m each, including making good the disturbed surfaces to match the existing, complete all as specified and directed.

Material and labour for Plain Cement Concrete (1:5:10) type E2, using 40 mm graded stone aggregate as in sunken slab filling, mass concrete etc., complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:3:6) type C0, using 12.5 mm graded stone aggregate as in filling the Chowkats/frames complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour for, Pre-cast Reinforced Cement Concrete, (1:2:4), type B1 using 20 mm graded stone aggregates as in cover slabs of manholes, gully traps, drains, etc., set in CM(1:4) complete all as specified and as directed. NOTE :- Steel for Reinforcement will be measured and paid separately.

Supply only liquid water proofing compound all as specified and as directed.

Supply and fix, 30 mm thick Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete including Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar (1:4) and finished to match with existing surface complete all as specified and as directed.

Supply and fix, 35 mm thick Factory made Second class hardwood Glazed, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to Chowkats all as specified and as directed.

Supply and fix 35 mm thick plain framed paneled factory made shutters (two panel) with II nd class hardwood rail and style with lock rail and panel of 12 mm BWP commercial ply with commercial veneer on both faces. The size of rail and style as per IS - 1003 Part - I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix Continuous (piano) hinges, mild steel, bright finish or electro-galvanised, width of flap when opened shall be not less than 30 mm, complete all as specified and as directed.

Supply and fix 100 mm long Mild steel Butt hinges medium weight cold rolled mild steel by welding to existing frame all as specified and as directed.

Supply and fix, Stainless steel Butt hinges, 100 mm long fixed with screws complete all as specified and as directed.

Supply and fix, Stainless steel Butt hinges, 75 mm long fixed with screws complete all as specified and as directed.

Supply and fix in repairs, Floor door stopper, 150 mm length of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix in repairs, single action spring hinges, 100 mm size, mild steel with steel wire spring, stove enameled black fixed in repair including necessary welding to door frame complete all as specified and as directed.

Taking down unserviceable boards as in shelves of cupboards, doors, etc., supply and fix 18/19 mm thick one side pre-laminated particle board, interior grade, with decorative choice lamination on other side, fixed with screws, including providing 6 mm thick teak wood edging etc., complete all as specified and as directed.

Taking down unserviceable boards as in shelves of cupboards, doors, etc., supply and fix 18/19 mm thick fire retardant plywood BWR Grade, fixed with screws, including providing 6 mm thick teak wood edging etc., complete all as specified and as directed.

Material and labour, for 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionscomplete all as specified and as directed.

Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

Supply and fix 150 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.

Supply and fix 100 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.

Supply and fix 100 mm long stainless steel handles, fancy type complete all as specified and as directed.

Supply and fix, 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix, Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and as directed.

Taking down unserviceable peg sets, Supply and fix, chromium plated peg set (set of 6), fancy type (as approved by GE/Engineer-in-Charge), fixed with screws, complete all as specified and as directed.

Supply and fix powder Coated aluminium frames and shutters (minimum thickness of powder coating 50 microns) and fabricating of doors, windows, ventilators and fixed partitions with one or more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc. complete all as specified and as directed. Note :- i) For payment purpose weight of aluminium section shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate, iii) Sheet glass and wire gauge shall be measured and paid for separately under respective items.

Supply and fix, mild steel work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and labour for, Mild steel TMT bars of 10 mm dia as in reinforcement, cut to length, bent to shape required, including cranking, bending, spirally looping for columns, hooking ends & binding with and including mild steel annealed wire of not less than 0.9 mm dia or securing with clips complete all as specified

Supply and fix (including fabrication and erection) structural steel as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

Supply, fabrication and fixing of mild steel work as in hand rail, rounded or other stock section drilled and counter sunk for balusters, running bars, embedding in concrete, including necessary drilling, bolting or riveting, etc, and similar work, conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

Supply and fixing Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, including shop coat of primer complete all as specified and as directed.

Supply and fix, Pressed steel door frame of size 105 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting of any guage and in any position, providing material and labour for, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified.

Material and labour, for padding concrete / leveling course over slabs with Plain cement concrete (1:2:4), type B1 (using 20 mm graded stone aggregate), laid to achieve proper slope as per site conditions, surfaces finished fair complete all as specified and directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:4:8), type D2, using 40 mm graded stone aggregates as in pavings / sub-bases laid in panels, finishing the surfaces even and fair complete all as specified and as directed.

Material and labour, for 25 mm thick Plain Cement Concrete 1:2:4, type B0, using 12.5 mm graded stone aggregates as in floor finishing's, finishing the surfaces rough and even to receive screed bed / bedding layer complete all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:3:6), type C1, using 20 mm graded stone aggregates as in paving / plinth protection, laid in panels, finishing the surfaces even and fair complete all as specified and as directed.

Material and labour, non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, as in flooring, jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour, non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.11 sq m but not exceeding 0.18 sq m, as in flooring, jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour, non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.11 sq m but not exceeding 0.18 sq m, as in vertical surfaces ie., on skirting / dado, jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick backing coat in CM (1:3) complete all as specified and as directed.

Material and labour, Joint free non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.18 sq m but not exceeding 0.38 sq m, as in flooring, jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour, Joint free non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.18 sq m but not exceeding 0.38 sq m, as in vertical surfaces i.e., skirting / dado,jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick backing coat in CM (1:3) complete all as specified and as directed.

Material and labour, for coloured Glazed ceramic tiles, of size 450 x 300 x 7 to 8 mm thick (Grade B-IIA) as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including provision of backing coat of 10 mm thick rendering in CM 1:3, complete all as specified and directed.

Renewing glazed Ceramic tiles of any type & size in patches, area of one patch not exceeded 5 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles and matching with existing surface over and including 10 mm thick backing coat in CM 1:3, complete all as specified and as directed.

Demolition of existing PCC tiles of any thickness and in any position, providing Material and labour, for Chequered cement concrete tile flooring with tiles of size 30 cm x 30 cm x 20-25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry, over and including screed bed of 20 mm thick in CM (1:4) complete all as specified and as directed.

Demolition of existing stone slabs of any thickness and in any position, providing Material and labour, for 18 to 20 mm thick Granite work (of any type), table rubbed and pre- mirror polished, in single piece in steps, jambs, pillars, window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, laid over and including backing coat of 15 mm thick in CM (1:4), complete all as specified and as directed.

Demolition of existing stone slabs of any thickness and in any position, providing Material and labour, for 20 to 25 mm thick, polished machine cut Kota stone slab as in flooring, over and including screed bed in cement mortar 15 mm thick in CM (1:4) set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

Demolition of existing stone slabs of any thickness and in any position, providing Material and labour, for 12 to 15 mm thick, polished machine cut Kota stone slab as in skirting / dado, riser of steps, etc., over and including backing coat in cement mortar 10 mm thick in CM (1:3) set and jointed with grey cement slurry mixed with pigment to match the shade of the slab rounding of edges, rubbing and polishing, complete all as specified and as directed.

-BLANK-

Material and labour, for Rendering 10 mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finishing the surfaces even and fair mixed with water proofing compound and applying 1 mm thick Brush bond RFX (two component acrylic polymer modified cementious coating consisting of Brush bond RFX powder and Brush bond RFX liquid acrylic emulsion grey in colour of Make FOSROC) on plastered concrete surface using stiff brush roller or trowel to obtain desired thickness complete all as per manufacturer's instructions, all as specified and as directed. Note : Supply only water proofing compound will be measured and paid separately.

Material and labour for, rendering 15 mm thick in cement mortar 1:3 on concrete surfaces, finishing even and smooth including mixing with water proofing compound as per user’s manufacturer’s instructions, complete all as specified and as directed. Note:- Supply only water proofing compound will be measured and paid for separately under respective items.

Material and labour for, rendering 15 mm thick in cement mortar 1:4 on concrete surfaces, finishing even and smooth including mixing with water proofing compound as per user’s manufacturer’s instructions, complete all as specified and as directed. Note:- Supply only water proofing compound will be measured and paid for separately under respective items.

Material and labour, for rendering 10 mm thick in Cement mortar 1:6, on brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour, for rendering 5 mm thick on brick or concrete ceiling surfaces in cement mortar(1:3) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Preparation of new or previously untreated plastered WALL surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Preparation of new or previously untreated plastered CEILING surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Preparation of new or previously untreated plastered surfaces, applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gram/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 over and including priming coat of exterior primer applied @ 0.90 litre/ 10 over new surfaces

Complete removal of existing treatment and preparing the surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty complete all as specified and directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Complete removal of existing treatment and preparing the surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty complete all as specified and directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Preparation of new wooden surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide pink primer complete all as specified and as directed.

Preparation of new steel surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for, Preparation of old plastered and applying one coat of oil bound distemper on wall surfaces complete all as specified and as directed.

Material and labour for, Preparation of old plastered and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and as directed.

Preparing of old wall concrete surfaces, and providing material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gram/litre and UV Resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 complete all as specified and as directed.

Repairs to steel windows / ventilators (area not exceeding 0.6 Sq m) of any description, replacing unserviceable handles, hinges, peg stay, etc, of any type / pattern and making window / ventilator shutter absolutely working condition, including necessary welding if required, complete all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc. complete all as specified and as directed.

Supply and fix Plain Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane all as specified and as directed.

Supply and fix Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 in each pane all as specified and as directed.

Supply and fix, stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.

Taking down unserviceable GI tubing, supply and fixing new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, all as specified and as directed.

Supply and fix in repairs, 32 mm dia, PVC waste pipe of length not less than 800 mm, complete all as specified and as directed.

Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and lay, UPVC (SWR Grade) pipes of 110 mm internal dia, conforming to IS 13592, Type B, pipes, single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and lay, UPVC (SWR Grade) pipes of 75 mm internal dia, conforming to IS 13592, Type B, pipes, single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

Taking down unserviceable UPVC pipes, including all fittings, heads, shoes, bends, swan-necks, etc., Supply and lay, 40 mm dia, Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed.

Supply and fix in repairs, PVC (SWR) bends any radius 75 mm dia with access door, fixed in pipes, complete all as specified and as directed.

Supply and fix in repairs, PVC (SWR) bends any radius 110 mm dia with access door, fixed in pipes, complete all as specified and as directed.

Supply and fix in repairs, 75 mm bore, PVC (SWR) branch pipe, Single 'Y' equal or unequal with access door, complete all as specified and as directed.

Supply and fix in repairs, 110 mm bore, PVC (SWR) branch pipe, Single 'Y' equal or unequal with access door, complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed.

Dismantling of unserviceable floor trap, supply and fix PVC(SWR) floor trap 75 mm dia outlet with CP grating, including jointing with solvent cement complete all as specified and as directed.

Dismantling of unserviceable multi floor trap, supply and fix PVC(SWR) multi floor trap 75 mm dia outlet with CP grating, including jointing with solvent cement complete all as specified and as directed.

Supply and fix, PVC connecting pipe 600 mm long 15 mm dia both ends having brass coupling nut and PVC washer after taking down old connecting pipe complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, water closet pan (pedestal pattern), with PP soft seat cover, hinges, other fixing accessories set (excluding flushing cistern and flush pipe), UPVC (SWR), 'P' or 'S' trap, and connecting to drain (or outgoing pipe), flush pipe, anti syphonic pipes, Make : Cat Part No S1050101 of Cera or techno commercial equivalent in other makes complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, flushing pipe, anti syphonic pipe, complete, all as per Make : Cera, Cat No S3010102 of CALINA make or techno commercially equivalent in other makes specified complete all as specified and directed.

Supply and fix in repairs, PVC valve less, syphonic action type, white colour flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including jointing with new PVC long / short flush bend and making good to the disturbed surfaces complete all as per Model No: CIENA PREMIUM Cat Part No B1010102 of CERA Make or techno commercial equivalent in other makes complete all as specified and as directed.

Supply and fix, Ball valves of 20 mm dia , (minimum weight 210 grams) , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and as directed.

Supply and fix in repairs vitreous China urinals, bowl type, white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with brackets, flush pipe, grating and Union for discharge pipe as per CAt Part No S4020103 of Cera or techno commercial equivalent in other makes specified here-in-after, complete all as specified and as directed.

Supply and fix in repairs Health faucet, with 8 mm dia, 1.2 m long, flexible tube in chrome finish, wall hook with NRV (back flow preventer), all as per Cat Part No ALD-577 of Jaquar or techno commercial equivalent in other makes complete all as specified and directed.

Supply and fix in repairs, Bib taps 15 mm dia, fancy type, chromium plated with CP flange all as per Cat No. HT F3001151 of Cera or equivalent in other makes specified complete all as specified and as directed.

Supply and fix, in repairs, two way, bib taps, fancy type, 15 mm dia, cast copper alloy, chromium plated, with CP flange, screwed for iron pipe or for brass ferrule, all as per Cat No.HT F3001163 of Cera or equivalent in other makes specified complete, all as specified and as directed.

Supply and fix in repairs, Pillar taps, 15 mm dia, fancy type, chromium plated with CP flange, long shank all as per Cat No. F3002101 of Cera or equivalent in other makes specified here-in-after, complete all as specified and as directed.

Supply and fix in repairs, Angular cock, fancy type, with chromium plated wall flange, cast copper alloy, screwed both ends for iron pipe or for brass ferrule,15mm dia, complete all as specified and as directed. MAKE:- Cat No. HT F3001201 of CERA or techno-commercially equivalent model in any one of the make as mentioned in list of makes here-in-after.

Supply and fix in repairs, Stop valves, fancy type with CP wall flanges, chromium plated, cast copper alloy with long shank and exposed part kit with fittings sleeve, operating lever concealed part screwed both ends for iron pipe or for unions, including making good the disturbed portion matching with adjacent surfaces, complete all as specified and as directed.

Supply and fix in repairs, Chromium Plated overhead shower rose of size 125 mm with swivel joints, over head shower arm of 230 mm long with wall flange, complete all as specified and as directed. Make : Cera Cat Part No F7020305 & F7040103 or techno and commercial equivalent in other makes specified after taking down old shower rose complete all as specified and as directed.

Supply and fix in repairs, brass chromium plated, fancy type, soap dish, as per Cera Cat Part No F5003106 or equivalent in other makes, and fixing with brass screws, complete all as specified and directed.

Supply and fix in repairs, stainless steel toilet paper holder with flap guard, fixed to wall with CP brass screws and PVC cleat complete all as specified and as directed. Make: Cat Part No F5002110 of Cera or techno commercial equivalent in other makes, complete all as specified and as directed.

Supply and fix in repairs, gun metal, globe or gate valves 20 mm bore with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix in repairs, Vitreous china snow white, wash hand basin of size 550 mm x 400 mm all as per Cat No. No. S2040103 of Cera or techno and commercial equivalent makes specified including supply and fixing 32 mm dia, PVC corrugated / flexible waste pipe, 800 mm long and with PTMT waste coupling of 32 mm dia (minimum weight 45 grams), all as specified and as directed.

Supply and fix in repairs, single tube towel rail, brass chromium plated, 600 mm long fixed with chromium plated screws and PVC cleats, complete all as specified and as directed. Make : CERA, Model No F5003103 or techno and commercial equivalent complete all as specified and as directed.

Taking down old sinks, Supply and fixing Stainless steel kitchen sink with draining board made out of 1.00 mm thick sheet for kitchen over all size 915 mm x 460 mm, with bowl size 410 mm x 330 mm x 160 mm of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc. complete all as specified and directed.

Dismantling of water tanks of 500 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Dismantling of water tanks of 750 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Uprooting shrubs / plant /flora / fauna on walls, girth not exceeding 100 mm, cutting holes in walls, digging out roots applying sulphuric acid / phenolic acid as per manufacturers instructions to burn out deep grown roots and making good the surface using CM 1:3 (mixed with and including water proofing compound) complete all as specified and as directed. (Note : The height of walls is up to 16 m, necessary cost of scaffolding shall deemed to be included in quoted rate.)

Sai Ram Builders

Solar Electricals and Electronics

SREE SIDDESHWARA TRADERS

C R R CONSTRUCTIONS

M/S Suresh Raju

GKR and CO

K R Koteswara Rao