Repair/ maint of internal wiring, fittings , cooling appliances, water supply at MIR Records, MAC Gp, D and M Bn and Adm Bn at MIRC Ahmednagar

Amount

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc complete as specified & directed.

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards or wooden boards with sunmica top for mounting switches, sockets, fan regulators, accessories etc complete all as specified and directed for One light point and one fan point controlled by one, one way swtich. Make of wire- HPL/Polycab/Havells/Standard. (Switches, sockets, fan regulators and other accessories shall be measured and paid for separately).

All as per serial item No. 2 here-in-before but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed.

All as per serial item No. 2 here-in-before but one 5 Amp 5 pin socket outlet point on independent board including earth wire complete all as specified and directed.

All as per serial item No. 2 here-in-before but one light point controlled by one 2 way switches.

All as per ser item No. 2 here-in-before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 2 herein before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 1.5 Sqmm FRLS type copper stranded conductor as earth wire & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes complete all as specified and directed.

Point wiring with 1.5 Sqmm (nominal area) copper conductor cable (Multi stranded) PVC insulated and unsheathed in and including PVC conduit concealed /PVC surface conduit with sunk cast iron/pressed steel terminal boxes of adequate size with 3 mm thick plastic laminated sheet cover of adequate size including 1.5 Sqmm (nominal area) copper conductor cable (multistrand) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified and directed for One light point and one fan point controlled by one, one way swtich. Make of wire- HPL/Polycab/Havells/Standard. (Switches, sockets, fan regulators and other accessories shall be measured and paid for separately).Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall ,floors etc.

All as per serial item No. 8 here-in-before but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed.

All as per serial item No. 8 here-in-before but one 5 Amp 5 pin socket outlet point on independent board including earth wire complete all as specified and directed.

All as per serial item No. 8 here-in-before but one light point controlled by one 2 way switches.

All as per ser item No. 8 here-in-before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per ser item No. 8 here-in-before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire complete all as specified & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes.

Switch piano flush button 5 Amp, single pole, one way, 230 volts white finish, fixed complete all as specified & directed. Make - Havells / Leader /Vinay/ Anchor.

Socket outlet flush type 5 pin 5 Amp multipurpose, 230 volts, single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish, fixed complete all as specified & directed. Make - Make - Havells / Leader /Vinay/ Anchor.

Switch socket combination flush type 5 pin 5 Amp multipurpose, 230 volts, single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish, fixed complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Switch socket combination multipurpose, flush type 2 in 1 type (3 and 3 pin ) 5/15 Amps, 230V, AC white/ivory finish, fixed complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Ceiling rose surface PVC 65x50 mm dia 2 to 3 terminals including PVC mounting block, white/ivory finish fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Bell push, flush type, 5 Amp single pole, 230 volts white finish, fixed complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Switch piano flush button 5 Amp single pole, 2 way, 230 volts white finish, fixed complete all as specified & directed. Make - Havells / Leader /Vinay/ Anchor.

Fan regulator electronic on existing phenolic laminated sheet, dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep, including connecting up and fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.. Make -Havells / Leader /Vinay/ Anchor.

Factory made batten for LED tube light fitting complete with all accessories made up of rigid MS powder coated sheet of suitable thickness and suitable for LED tube rod of capacity upto 22 Watt prewired fixed in replacement complete all as specified & directed. Make - Havells Cat Part No. or equivalent in make Philips/ CG/ Wipro .

LED Tube rod of capacity upto 22 watt complete with all accessories,fixed in replacement complete all as specified & directed. Make - Havells cat Part No. Or equivalent in Make Philips/ CG/ Wipro .

Recess mounted LED luminaire for soft glair free light, of capacity 36 watt, AC 230 volt of size 600 mm x 600 mm complete with all acessories and connections, fixed in replacement complete all as specified & directed. Make - CG/ Bajaj/Philips/Wipro/Havells.

Recess mounting LED flat panel with high brightness LED for glare-free homogenous illumination. 1x18 watt, 230 volt of size 295 mm x 295 mm etc prewired including three core copper cable 23/0.0076 from ceiling rose to light fittings, fixed in replacement complete all as specified & directed. Make - Havells Cat Part No or equivalent in Make Bajaj/Philips/Wipro/Surya.

Buzzer, AC, 230 volts, single phase, fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Bell ding dong or multimusic, AC, 230 volts, single phase fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Bakelite sheet PVC rectangular box of size 100 mm x 100 mm and 50 mm deep not less than 3 mm thick for mounting of switch sockets, fan regulators, etc.complete with screws and washers, etc. fixed in replacement complete all as specified and directed.

Bakelite sheet PVC rectangular box of size 175 mm x 100 mm and 50 mm deep not less than 3 mm thick for mounting of switch sockets, fan regulators, etc.complete with screws and washers, etc. fixed in replacement complete all as specified and directed.

Bakelite sheet PVC rectangular box of size 200 mm x 150 mm and 50 mm deep not less than 3 mm thick for mounting of switch sockets, fan regulators, etc.complete with screws and washers, etc. fixed in replacement complete all as specified and directed.

Bakelite sheet PVC rectangular box of size 250 mm x 200 mm and 50 mm deep not less than 3 mm thick for mounting of switch sockets, fan regulators, etc.complete with screws and washers, etc. fixed in replacement complete all as specified and directed.

Bakelite sheet PVC rectangular box of size 350 mm x 300 mm and 50 mm deep not less than 3 mm thick for mounting of switch sockets, fan regulators, etc.complete with screws and washers, etc. fixed in replacement complete all as specified and directed.

Switch/socket combination outlet 3 pin 5 Amps flush type (Multi purpose) piano type AC 230 Volts, fixed in replacement complete all as specified and diercted.(For replacement of burnt item only except wiring for attending complaints)

Switch/socket combination outlet 2 in 1, 3 pin 5 Amps and 15 Amp flush type (Multi purpose) piano type AC 230 Volts fixed in replacement complete all as specified and diercted.(For replacement of burnt item only except wiring for attending complaints)

Electronic dimmers, 450W, 250V flush type on the exiting phenolic laminated sheet etc. as required fixed in replacement complete all as specified and diercted.(For replacement of burnt item only except wiring for attending complaints)

Ceiling rose 65x50mm two to three terminal AC 230 volts, fixed in replacement complete all as specified and diercted. complete all as specified. (For replacement of burnt item only except wiring for attending complaints)

Buzzer,AC, 230 volts, single phase fixed in replacement complete all as specified and diercted.(For replacement of burnt item only except wiring for attending complaints)

Bell, ding dong, AC, 230 volts, single phase fixed in replacement complete all as specified and diercted.(For replacement of burnt item only except wiring for attending complaints)

Bell multi music type AC, 230 volts, single phase fixed in replacement complete all as specified and diercted.(For replacement of burnt item only except wiring for attending complaints)

Lamp holder insulated body with back plate batten/angle type for batten fittings fixed in replacement complete all as specified and diercted.(For replacement of burnt item only except wiring for attending complaints)

Sheet metal enclosures with plug and socket, single pole and neutral with two pin and earth plug and with and including one MCB of 20 Amps (SP), fixed in replacement complete all as specified and directed. Make- Indo Asian/ Standard/ Legrand/ Schenider

Electronic ballast 36/40 watts 230 volts, fixed in replacement complete all as specified and diercted. Make - Crompton/Surya/Havells

Electronic ballast 18/20 watts 230 volts, fixed in replacement complete all as specified and diercted. Make - Crompton/Surya/Havells

Electronic ballast 9/11 watts 230 volts, fixed in replacement complete all as specified and diercted. Make - Crompton/Surya/Havells

Spring loaded rotary type bipin holder suitable for 20/40 watt Tube light fittings, fixed in replacement complete all as specified and diercted.

Cable flexible PVC insulated twin core with copper conductor of size 23/0.0076 , fixed in replacement complete all as specified and diercted.

Cable flexible PVC insulated twin core with copper conductor of size 40/0.0076, fixed in replacement complete all as specified and diercted.

Plug top 3 pin 5 amps AC 230 volts, fixed in replacement complete all as specified and diercted. Make- Crabtee CP No-ACAGXXW063 or Anchor/HPL

Plug top 3 pin 15 Amps AC 230 volts , fixed in replacement complete all as specified and diercted. Make- Crabtee CP No-ACAGXXW163 or . Anchor/HPL

MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts, fixed in replacement complete all as specified and diercted.

Supply and fix in replacement MCB SPN 6 to 40 Amps 10 KA AC 230 volts, fixed in replacement complete all as specified and diercted.

Sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way with 200 Amps rated busbar, fixed in replacement complete all as specified and diercted.

All as per item 53 here-in-before but 4 way SPN with 200 amps rated bus bar complete all as specified and directed.

All as per item 53 here-in-before but 4 way TPN 415 volts all as specified and directed.

MCB TPN, 415 Volts, 63 Amps, fixed in replacement complete all as specified and directed.

DB Sheet metal enclosure (IP-63) protection (Vertrical type) TPN 415 Volt 4 way with 200 Amp rated bus bar of suitable size and common neutral link in all enclosed in standard steel flush mounting type factory fabricated enclosure complete with 63 Amps, TP, MCCB and neccessary blanking plates for unused ways and outgoing 12 Nos, fixed in replacement complete all as specified and diercted. Cat part No 607790 Make Legrand or equivalent in Make Schnieder or Siemens

PVC casing caping and fixing accessories such as complete,lock nuts, saddles hook etc of adequate size, fixed in replacement complete all as specified and directed.

Electronic ballast 28 watts, 230 volts fixed in replacement complete all as specified and directed. Make - Crompton/Surya/Havells.

Modular switch 1 way 6 Amps ,1 module, fixed in replacement complete all as specifed and directed .Make;- Legrand/Anchor/Crabtree

Modular bell push 1 way , 6 Amps, 2 module, fixed in replacement complete all as specifed and directed .Make;- Legrand/Anchor/Crabtree

Modular socket 5 pin 6 Amp,2 modue fixed in replacement complete all as specifed and directed .Make;- Legrand/Anchor/Crabtree

Modular socket 5 pin 6/16 Amp,combination type, 2 modue fixed in replacement complete all as specifed and directed .Make;- Legrand/Anchor/Crabtree

Modular Fan Regulator 120 watt , 2 modue, fixed in replacement complete all as specifed and directed .Make;- Legrand/Anchor/Crabtree

Modular cover plate frame,2 module, complete all as specifed.Make;- Legrand/Anchor/crabtree

Modular cover plate frame white, 4 module, fixed in replacement complete all as specifed and directed .Make;- Legrand/Anchor/Crabtree

Modular cover plate frame,6 module, fixed in replacement complete all as specifed and directed .Make;- Legrand/Anchor/Crabtree

Modular cover plate frame,8 module, fixed in replacement complete all as specifed and directed .Make;- Legrand/Anchor/Crabtree

Modular cover plate frame,12 module, fixed in replacement complete all as specifed and directed .Make;- Legrand/Anchor/Crabtree

(A)WATER COOLER Disconnecting water cooler of any size from main power and taking out for carrying out necessary service/maintanance and checking serviceability of compressors, fan motor , capacitor,thermostate switches, gas leackage , push taps,fan blades,relays,over load protectors, condensor coils and any otyher spares required to make the water cooler functional and fixing in origional / existing position complete all as specified and directed.

Push cock of brass 15 mm dia chromium plated, self closing type with back plate assembly suitable for water cooler any capacity, fixed in replacement complete all as specified and directed

Float vlave assembly 15 mm dia with brass body and polythene float ball, high pressure type suitable for water cooler, fixed in replacement complete all as specified and directed

Combination relay unit complete suitable for water cooler 40/80 litre capacity, fixed in replacement complete all as specified and directed. Make: RANUTROL/ INDFOS/ KIRLOSKAR/ SRI RAM/HI TECH.

Combination relay unit complete suitable for water cooler 150 litre capacity, fixed in replacement complete all as specified and directed. Make: RANUTROL/ INDFOS/ KIRLOSKAR/ SRI RAM/HI TECH.

Over load protector suitable for water cooler any capacity, fixed in replacement complete all as specified and directed. Make: SHRIRAM/ RANUTROL/ KIRLOSKAR/HI TECH.

Starting capacitor 60 to 80 mfd suitable for water cooler any capacity, fixed in replacement complete all as specified and directed. Make: SHARDA/ KELL/ USHA/ TESLA/EPCOS/SIMENS.

Running capacitor 10 mfd suitable for compressor of water cooler of any capacity,fixed in replacement complete all as specified and directed. Make: SHARDA/ KELL/ TESLA/ USHA/EPCOS/SIMENS.

Condenser coil suitable for water cooler 40/ 80 litre capacity as per existing size, fixed in replacement complete all as specified and directed.

Condenser coil suitable for water cooler 150 litre capacity as per existing size, fixed in replacement complete all as specified and directed.

Thermostat switch suitable for water cooler including knob plate and screw, fixed in replacement complete all as specified and directed. Make: INDFOS/RANUTROL/ SRIRRAM/USHA/HI TECH.

Condenser fan motor not less than 1/5 HP or as required complete suitable for water cooler, fixed in replacement complete all as specified and directed. Make: AMERICAN UNIVERSAL/USHA/AIR MASTER/COOLER MASTER.

Disconnecting, cutting and taking out unserviceable sealed unit compressor of water cooler storage type 40-80 Ltrs capacity any make & model and supply and fixing compressor of same make for water cooler storage type 40-80 Ltrs capacity soldering, welding, brazing as required including charging of refrigerant gas and oil in the exchanged compressor, making electric & mechanical connections and water connection, installations of water cooler at site and testing on load complete all as specified and directed.

Disconnecting, cutting and taking out unserviceable sealed unit compressor of water cooler storage type 120-150 Ltrs capacity any make & model and supply and fixing compressor of same make for water cooler storage type 120-160 Ltrs capacity soldering, welding, brazing as required including charging of refrigerant gas and oil in the exchanged compressor, making electric & mechanical connections and water connection, installations of water cooler at site and testing on load complete all as specified and directed.

Preparation of old painted surfaces of water coolers of any capacity, removal of all dust and foreign matter with the help of sand paper and rubbing with cleaning compound and applying two coats of synthetic enamel paint (spray painting) of colour as approved by GE complete all as specified and directed.

PVC fan blade of blower motor suitable for any make and capacity of water cooler, fixed in replacement complete all as specified and directed.

Carrying out necessary servicing and, testing of water cooler, cleaning the gas system with CTC of nitrogen vacuumising properly and rectification of leakage in entire system and making the gas system leak proof to the entire satisfaction of Engineer-in-Charge/GE and charging the refrigerant R-134A or as required including replacement of gas filters complete all as specified and directed.

( B ) REFRIGERATOR Disconnecting refrigerator from main power to carry out necessary servicing and checkups to maintain efficient working throughout the season/year by checking, by cleaning the gas system with CTC vacuum pump and charging the refrigerant R-134A with antimoist substance and filter along with rectification of leakage in the system of 165/170/175/190/290 litres capacity refrigerator complete all as specified and directed.

Freezer of refrigerator of cap upto 165 to 190 Ltr ltr including shouldering to copper pipes etc., fixed in replacement complete all as directed.

Freezer of refrigerator of cap upto 290 Ltr ltr including shouldering to copper pipes etc., fixed in replacement complete all as directed.

Disconnecting, cutting and taking out unserviceable sealed unit compressor of Refrigerator upto 175 capacity any make & model and supply and fixing company repaired compressor of same make for Refrigerator upto 165 Ltrs capacity soldering, welding, brazing as required including gas charging in the compressor, making electric & mechanical connections at site and testing on load complete all as specified and directed.

All as per item 92 here-in-before but capacity 190 litres.

All as per item 92 here-in-before but capacity 290 litres.

Starting relay assembly suitable for refrigerator 165 to 290 litres capacity, fixed in replacement complete all as specified and directed. Make: RANUTROL/ INDFOS/HI TECH.

Thermostat switch with defrosting arrangement suitable for Refrigerator 286/310/165 litres capacity including knob plate and screw, fixed in replacement complete all as specified and directed. Make: INDFOS/ RANUTROL/ HONEY WELL/HI TECH.

( C ) AIR CONDITIONERS Carrying out necessary repair/service/maintanance to check serviceability of compressors, fan motor , capacitor,thermostates, PCB , gas leackage , Condenser fan blades, fan motors , relays ,over load protectors, condensor coils and any otther spares required to make the air conditioners ( window type / split type of capacity upto 2 TR ) functional and fixing in origional / existing position complete all as specified and directed.

Starting relay assembly including cost of cover and clip for air conditioner window type and split type 1.5/2 ton capacity, fixed in replacement complete all as specified. Make: HITECH/RENUTROL/ INDOFOS/ SRI RAM.

Starting capacitor 80/100 mfd suitable for 1.5/ 2 ton Air Conditioner window type /split type, fixed in replacement complete all as specified and directed. Make: SIEMENS/KELL/ SHARDA/ TESLA/ ASIAN.

Starting capacitor 120-150 mfd suitable for 2 ton capacity Air Conditioner window type / split type, fixed in replacement complete all as specified and directed. Make: SIMENS/KELL/ SHARDA/ TESLA/ ASIAN.

Running capacitor 4 mfd suitable for blower motor 1/1.5 ton Air Conditioner window type/water Cooler, fixed in replacement complete all as specified and directed. Make: SIMENS/KELL/ SHARDA/ TESLA/ ASIAN.

All as per item 102 here-in-before but of capacitor 40 to 45 mfd

Disconnecting and taking down outdoor unit of split air conditioner of 1.5/2 Ton capacity of any make and transporting to work shop, cleaning the gas system with CTC and charging the refrigerant after vacuumising the system including the cost of refrigerant with anti moist substance and strainer including rectification of leakage in the system and refixing in the same position complete all as specified and directed.

Thermostat switch suitable for air conditioner window type 1/1.5/2.0 ton capacity including knob plate and screw, fixed in replacement complete all as specified and directed. Make: RENUTROL/ INDOFOS.

Disconnecting, cutting and taking out unserviceable reciprocating type sealed unit compressor of window type/split type Air conditioner 1.5 Ton capacity any make & model and supply and fixing company new compressor of same make as existing for window type/split type air conditioner 1.5 Ton capacity, soldering, welding, brazing as required including charging of refrigerant gas and oil in the exchanged compressor, making electric & mechanical connections of air conditioner at site and testing on load complete all as specified and directed by the Engr-in-Charge. Note :- Contractor shall be liable to replace the provided sealed compressor under the item during free replacement guarantee period if compressor goes defective during guarantee period. For this purpose guarantee certificate of manufacture duly stamped and signed shall be submitted to department along with purchase voucher.

All as per item 106 here-in-before but rotary type compressor for 1.5 ton window/Split type AC

All as per item 106 here-in-before but reciprocating type compressor for 2 Ton window/Split type AC

Toughened moulded factory made PVC air filter of approved make suitable for 1.5/2 ton capacity window type/ split type AC, fixed in replacement complete all as specified directed.

Copper condenser of approved quality and make suitable for 1.5/2 ton capacity window type / split type AC as per sample, fixed in replacement complete all as specified and directed.

Connection lead of 3 core PVC insulated and PVC sheathed copper conductor cable of size 70/0.0076 ISI marked, fixed in replaceement complete all as specified and directed.

Blower motor 1/5 HP 380 W, single phase, 230 Volts, 50 cycles, with blower fan, suitable for 1.5/2 Ton window type AC, fixed in replacement complete all as specified and directed. Make: AMERICAN UNIVERSAL/LANCER/AIR MASTER/COOL MASTER.

Rewiring of air conditioner window type with copper wire consisting of single core PVC size 40/0.0007 with necessary sleeves, terminal clips, thimbles, insulating taps and clamps complete all as specified and directed.

Blower fan blade set of aluminium/ plastic suitable for 1.5/2 ton AC, fixed in replacement complete all as specified and directed.

Front grill for Air conditioner of any make and model as per the existing design and make as approved by Engineer-in-Charge , fixed in replacement complete all as directed. Make: SIDWAL/ USHA/ BLUE STAR/NAPOLIAN.

Remote control for split type Air conditioner of 2 Ton capacity suitable for particular Make of AC and making proper connection and testing complete all as specified and directed.Make of AC: LG/Blue Star/Carrier/Voltas

Refrigeration gas F-22/R-22 (Mefron/Refron) in returnable cylinder for filling in AC's,Reregerators,Water cooler etc. complete all as specified and directed.

(D) WATER SUPPLY Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying pipe line, sluice valve etc and getting out in soft/loose soil complete all as specified and diercted.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying pipe line, sluice valve etc and getting out in mud soil complete all as specified and diercted.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick including making good of disturbed surfaces complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Cutting the existing bituminous road / PCC hard standing upto 75 cm in depth and 60 cm in width and getting out excavated materials and making good the damaged portion after laying of pipes by returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick and PCC 1:2:4 type B1 using 20 mm graded stone aggregate upto 30 cm depth from top of the road complete all as specified and directed.

Repairs / rectification of leakages of existing GI tubing, 15 mm bore, laid in trenches, floors or on wall, roof by replacing new fittings such as Union, Sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing complete all as specified and directed. (Excavation and earth work for this item is deemed to be included in the unit rate quoted).

All as per serial item No. 124 here-in-before but 20 mm bore pipes.

All as per serial item No. 124here-in-before but 25 mm bore pipes.

All as per serial item No. 124 here-in-before but 40 mm bore pipes.

All as per serial item No. 124 here-in-before but 50 mm bore pipes.

All as per serial item No. 124 here-in-before but 80 mm bore pipes.

GI tubing medium grade, 15 mm bore, laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling, taking out old corroded pipe complete all as specified and directed . Make:- Tata/Jindal

GI tubing medium grade, 20 mm bore, laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling, taking out old corroded pipe complete all as specified and directed . Make:- Tata/Jindal

GI tubing medium grade, 25 mm bore, laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling, taking out old corroded pipe complete all as specified and directed . Make:- Tata/Jindal

GI tubing medium grade, 40 mm bore, laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling, taking out old corroded pipe complete all as specified and directed . Make:- Tata/Jindal

GI tubing medium grade, 50 mm bore, laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling, taking out old corroded pipe complete all as specified and directed . Make:- Tata/Jindal

GI tubing medium grade, 80 mm bore, laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling, taking out old corroded pipe complete all as specified and directed . Make:- Tata/Jindal

Gun metal or bronze globe / gate valve, 15 mm bore, ISI Marked, screwed both ends suitable for GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and directed . Make :- Kirloskar/Leader/Bir

Gun metal or bronze globe / gate valve, 20 mm bore, ISI Marked, screwed both ends suitable for GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and directed . Make :- Kirloskar/Leader/Bir

Gun metal or bronze globe / gate valve, 25 mm bore, ISI Marked, screwed both ends suitable for GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and directed . Make :- Kirloskar/Leader/Bir

Gun metal or bronze globe / gate valve, 40 mm bore, ISI Marked, screwed both ends suitable for GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and directed . Make :- Kirloskar/Leader/Bir

Gun metal or bronze globe / gate valve, 50 mm bore, ISI Marked, screwed both ends suitable for GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and directed . Make :- Kirloskar/Leader/Bir

Akanksha Enterprises

KAMINS CARE

Ms. S.K. ASSOCIATES