Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.0 LAccepted-Finance | L1 | Accepted-Finance OK | |
| 2 | L2₹23.3 L+₹32,947 (1.43%)Accepted-Finance | L2 | Accepted-Finance OK | |
| 3 | Rejected-Technical | - | Rejected-Technical The work for which experience certificate is provided, has been completed before last three financial year. | |
| 4 | Rejected-Technical | - | Rejected-Technical The work for which experience certificate is provided, has been completed before last three financial year. |
Tender Value
₹23 L
EMD Value
₹23,000
Closing Date
19 Apr 2023, 12:00 pmClosed
SE EDC BIJNOR
AVAS VIKAS COLONY, BIJNOR
Development of distribution infrastructure to supply electricity as per schedule in extended Nagar Nikaye/ Panchayat at district Bijnor of Uttar Pradesh (On Semi turnkey basis).
2023_PVVNL_790881_2
55/2022-23/EDC BIJNOR
Open Tender
Miscellaneous Works
Lump-sum
30 days
SE EDC BIJNOR
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SE EDC BIJNOR
₹23,000
27 Apr 2023
13 Apr 2023
19 Apr 2023
13 Apr 2023
19 Apr 2023
13 Apr 2023
Amount
Safe carriage of following material from Store Centre to site / JE store with loading & unloading at both ends respectively distance with in 40 Kms.
11/0.4 KV 400 KVA T/F
11/0.4 KV 250 KVA T/F
Loading, unloading & safe carriage of heavy other line material such as ACSR Weasal/Rabbit/Dog Conductor, diffrent size of LT AB cable, 11 KV Cable, L.T. Cable, 33 KV Xarm etc. from Store Centre to site / JE store distance with in 40 Kms. and back cartage of material if required.
ACSR Weasel conductor
AB Cable (3X95+1X70+1X16) sq.mm
Providing by contractor as per RESSPO schedule below items :- 11 KV line material (PART- A)
Stay set Complete Size 16x1800 mm
Earthing Rod set Complete Size 20x2500 mm
MS TOP Channel 125X65X1300 mm
MS Dropper Channel 125X65X1300 mm
MS Substation Angle
11 KV Disc Insulator with fitting
11 KV Pin Insulator with fitting
Holding Clamp for T-channel/Top/Dropper channel etc.
LT line material (PART- B)
Stone Pad size 300X300X75 mm
MS Nut & bolt all size
Holding Clamp with Nut & bolts for AB conductor
Piercing clamp for AB conductor
Dead & Clamp for AB conductor
PG Clamp for AB conductor
Suspension with I-Hook for AB conductor
Distribution Box three phase for AB conductor
PVC Cable 1x25 sqmm
PVC Cable 1x240 sqmm
Providing of PCC Pole 8.5 Mtr. Long as per RESSPO schedule
Pipe Earthing for 250/400 KVA T/F
Providing of STP Pole 11 Mtr. Long as per RESSPO schedule
Providing of Fuse Set as per RESSPO schedule
Providing of 250/400 KVA Fancing as per RESSPO schedule
Erection of Single Pole suitable for LT line/ HT Line on PCC/ST Pole after digging a pits of required size with fixing accessries complete.
Erection of Double Pole suitable for 11 KV line on PCC/ST Pole after digging a pits of required size with fixing accessries complete.
Grouting of supports in CC 1:4:8 (cement, sand & 40 mm brick ballast). Grouting will be done in the block of size (450x450) mm x 1/6th of full length of the support up to ground level, 300 mm plinth, above the ground level with CC 1:3:6 (Cement, Coarse Sand & Stone Grit) with muffing as per drawing. Work includes back filling and proper ramming. STP/PCC
Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of stay insulators of 11 KV/LT line and stay clamps. Grouting of Stay Rods (16x1800) mm. including all work of excavation, cement, concreting in size (0.60x0.60x0.30) m in ratio 1:4:8 cement, sand, 40 mm brick ballast as per drawing, including back filling of soil and proper ramming etc.
Earthing of supports with M.S. Earth Rod of including excavation of pit and driving M.S. Rod 3-0 M apart from support and 0.5 m below the ground level and connecting below the earth electrodes with the help of G.I. Wire No. 8 SWG and earthing lugs.
Laying, spreading, lifting and final sagging of 3 phases of Weasel Conductor in accordance with line chart including binding and fixing of all accessories in conductor in parallel in 11 KV HT Line for material
Laying, spreading, lifting and final sagging of AB Conductor 3X95+1X70+1X16 sq.mm in accordance with line chart including binding and fixing of all accessories in conductor in parallel in L.T. Line.
Erection of Distribution Box
Mounting of Erection of following transformers of different capacities on Double Pole/Plinth alongwith fixing of clamps and nuts & bolts with proper binding / jumpering etc.
Construction of plinth of 250 KVA T/F with fency as per RESSPO schedule.
Construction of plinth of 400 KVA T/F with fency as per RESSPO schedule.
Mounting of 11/0.4 KV 250 KVA T/F
Mounting of 11/0.4 KV 400 KVA T/F
Fixing of 11/0.4 KV 250/400 KVA T/F Fancing
Erection of Pipe Earthing for 250 KVA T/F Newtural & body earthing
Back Cartage of Dismentaled Cable/Conductor From Work site to Store Centre Bijnor with Loading & Unloading at both ends Distance with in 40 Kms.
AAYANSH ELECTRICAL SOLUTIONS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .