Term Contract for repairs to Hard Standing, Brick paving, Round abouts, Traffic islands, Park and like in all eight wards, Delhi Cantonment.

Amount

Reinforced Cement Concrete Bench without Arms : Supplying and fixing reinforced cement concrete chair benches with back rest without arms and having two logo of Delhi Cantonment Board as also letter 'DCB' engraved suitably on the benches at locations on concrete benches as specified/ directed by Engineer-in-Charge with indicated colour scheme, with total 6 planks, 3 planks for seating & 3 planks on backrest with 2 Nos L-Shape base support in grey cement colour. The detailed specification shall be as follows: Material Concrete mix design: M-30 Grade Concrete mix in accordance with IS:10269/latest in gray cement by using vibro – compaction technique and with reinforcement. Reinforcement steel : TMT reinforcement bars conforming to IS:1786/latest of dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used as stirrups as per drawing and specification given in technical bid (Specification). Stirrups details: 10 nos – 4 mm dia bar @ 150 mm C/C Main reinforcement bar: 4 nos – 10 mm dia bar Adequate clean concrete cover: 15mm minimum Material for connecting seating plank with leg: 12 mm dia x 65 mm long galvanized steel counter sunk bolts confirming to IS: 1367 / latest with EVA washer Material for connecting back rest plank with leg: Half threaded carriage bolts and nuts of size 165 mm length x 8mm dia with EVA and steel washers RCC planks: Using M-30 grade gray cement mixed with 3% red pigment Dimension Seat / plank length ± 3 mm: 1500 mm (all red coloured) Seat height ± 3 mm: 450 mm Seat width ± 3 mm: 440 mm Total bench height (including backrest ± 3mm: 1000 mm Size of wider plank ± 3 mm: 1500 mm x 200 mm x 50 mm Size of smaller plank ± 3 mm: 1500 mm x 100 mm x 50 mm Plank hole dia ± 3 mm: 14 mm Connecting holes from each end ± 3 mm: 200 mm Leg width ± 3 mm: 140 mm Distance between both legs ± 3 mm: 340 mm Paint & Finish Plank painting: Acrylic based paint conforming to IS: 15489 / latest of colour as per buyer’s choice Bench finishing: As per approved sample Finish of exposed surface: Uniformly smooth texture with no bug holes and smooth mold seams Hole finish: Hole visible at the back side of bench sealed with cement mortar APPROVED MAKES : KK, Kreative Concrete Company

Reinforced Cement Concrete Bench with Arms : Supplying and fixing reinforced cement concrete chair benches with back rest with two arms, (one on each side) having two logo of Delhi Cantonment Board as also letter 'DCB' engraved suitably on the benches at locations on concrete benches as specified/ directed by Engineer-in-Charge with indicated colour scheme, with total 6 planks, 3 planks for seating & 3 planks on backrest with 2 Nos L-Shape base support in grey cement colour. The detailed specification shall be as follows: Material Concrete mix design: M-30 Grade Concrete mix in accordance with IS:10269/latest in gray cement by using vibro – compaction technique and with reinforcement. Reinforcement steel : TMT reinforcement bars conforming to IS:1786/latest of dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used as stirrups as per drawing and specification given in technical bid (Specification). Stirrups details: 10 nos – 4 mm dia bar @ 150 mm C/C Main reinforcement bar: 4 nos – 10 mm dia bar Adequate clean concrete cover: 15mm minimum Material for connecting seating plank with leg: 12 mm dia x 65 mm long galvanized steel counter sunk bolts confirming to IS: 1367 / latest with EVA washer Material for connecting back rest plank with leg: Half threaded carriage bolts and nuts of size 165 mm length x 8mm dia with EVA and steel washers RCC planks: Using M-30 grade gray cement mixed with 3% red pigment Dimension Seat / plank length ± 3 mm: 1500 mm (all red coloured) Seat height ± 3 mm: 450 mm Seat width ± 3 mm: 440 mm Total bench height (including backrest ± 3mm: 890 mm to 1000 mm Size of wider plank ± 3 mm: 1500 mm x 200 mm x 50 mm Size of smaller plank ± 3 mm: 1500 mm x 100 mm x 50 mm Plank hole dia ± 3 mm: 14 mm Connecting holes from each end ± 3 mm: 200 mm Leg width ± 3 mm: 140 mm Distance between both legs ± 3 mm: 340 mm Paint & Finish Plank painting: Acrylic based paint conforming to IS: 15489 / latest of colour as per buyer’s choice Bench finishing: As per approved sample Finish of exposed surface: Uniformly smooth texture with no bug holes and smooth mold seams Hole finish: Hole visible at the back side of bench sealed with cement mortar APPROVED MAKES : KK, Kreative Concrete Company

Supplying & laying Instant patch pothole premixwith fine/ standard grading (Ready Mix of first quality) for filling of potholes, utility cuts, over lays, edge repairs & small carpeting jobs filled in pots & campacted as directed.

Bidder Name

Amount

R K GOEL ABHEY KUMAR JAIN (GSTN-07AAIFR5486R1Z6) BID ID -3264909

AMIT ASSOCIATES (GSTN-07ACUPG0847K1Z7) BID ID -3266727

mtechassociates (GSTN-07AAWFM7617H1ZP) BID ID -3266802

M/s. Kansal Construction Co. (GSTN-07AALPK1176E3ZR) BID ID -3266993

mtechassociates (BID ID -3266802)

AMIT ASSOCIATES (BID ID -3266727)

R K GOEL ABHEY KUMAR JAIN (BID ID -3264909)

M/s. Kansal Construction Co. (BID ID -3266993)

AMIT ASSOCIATES (BID ID -3266727)

R K GOEL ABHEY KUMAR JAIN (BID ID -3264909)