8548E8PROVN OF TOILET FACILITIES OF BUILDING NO P 515 TO P 519 SANITARY FACILITIES ADJACENT TO BUILDING NO T 674 AND REPLACEMENT OF VINTAGE DRAINAGE SYSTEM IN CERTAIN LOCATIONS AT ETI IN EAST AREA UNDER GE M AF JALAHALLI BANGALORE

Amount

SCHUDULE A PART I (B&R) ITEMS Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m deep for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Material labour for PCC 1:4:8 type D-2 (using 40mm graded agg) in foundation, filling and mass concrete complete all as specified and as directed.

Material labour for hard core of gauge n.exe.63mm with broken stone boulders, deposited spread and levelled in layers not exe 15 cm thick watered and rolled rammed to a true surfaces complete all as specified and as directed.

Material labour for 40mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring complete all as specified and as directed.

Material and labour for 75mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in Path/plinth protection and finished even and smooth without using extra cement complete all as specified and as directed.

Material labour for pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 complete all as specified and as directed.

Material labour for RCC type B1 1:2:4, 20 mm graded stone aggregate as in plinth beam/band etc mixed with with using integral water proofing compound. Note:- WPC shall be measured and paid separately

Supply only integral water proofing compound of approved make all as specified and as directed.

Material labour for RCC type B1 1:2:4, 20 mm graded stone aggregate in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

Material labour for reinforced cement concrete (1:2:4) typeB-1using 20mm graded stone aggregate as in slabs and finishing exposed surfaces fair & even complete all as specified and as directed.

Material labour for TMT bar10mm dia & over deformed & twisted bars cut to length ,bent to shape required incl cranking , bending , hooking, for lintel and binding with MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Material labour for TMT bars 8mm dia in stirups cut to length bent to shape required including cranking, hooking ends etc and binding with MS wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundation,footing,based of columns,raft and raft beam,sides and soffits (if any) of foundation and plinth beams,and similar works,vertical or to batter rough finished flate surface of concrete complete all as specified and as directed.

Use and waste form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with rough finished surface of concrete complete all as specified and as directed.

Material labour for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in hold fast complete all as specified and as directed.

Material labour mild steel work as in angle Iron, Channel section,flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting etc complete all as specified and as directed.

Supply and fix galvalume sheets AZ-150 having pitch 190mm, depth 29mm and thickness not less than 0.50mm (Galvalume base- trapezoidal profile sheets) fixed with aluminium self staging screws of size 50/75mm and aluminium washer of suitable size in roof covering, gutters and cladding complete all as specified and as directed. Note:- Over lap shall be provided as specified by manufacturer.

Supply and fix galvalume sheets AZ-150 plain sheets havung thickness not less than 0.50mm (Galvalume base- trapezoidal profile sheets) fixed with aluminium self staging screws of size 50/75mm and aluminium washer of suitable size in roof covering, gutters and cladding complete all as specified and as directed. Note:- Over lap shall be provided as specified by manufacturer.

Material labour ff preparation of new steel surface and appling two coat of synthetic enamel paint on new steel surface over a coat of red oxide complete all as specified and as directed.

Returning fillin in, including spreading, leveling,watering and well ramming in layers n exc 25cm all as specified and as directed.

Filling under floor in layers not exc 25 cm incl spreading, levelling watering etc complete using soils from excavation all as specified and as directed.

Removing excavated material exceeding 250m and n.exc 500m and depositing where directed at a level not exceeding 1.5m above the GL from the starting point all as specified and as directed.

Material labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured & paid seperately.

Material labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material labour for preparation of plastered surfaces of walls and applying two coats of cement base paint over primer alkali resistance on new surfaces complete all as specified and as directed.

Material labour for preparation of plastered surfaces of wall and applying three coats of white wash on new surfaces all as specified and as directed.

Material labour for screed bed 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor all as specified and as directed.

Material labour for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Material labour for rendering 15mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc all as specified and as directed.

Material labour for coloured glazed ceramic tiles of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and as directed.

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

Material labour for mild steel framed work such as guard bars with end of bars welded complete all as specified and directed.

Supply and fix frosted glass 4mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fix PVC solid door frame os size 50mm X 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as per drawing and all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolts of size 150mm of extruded section and fixed as all as specified and as directed.

Supply and fix aluminium handles f 125 mm, cast type, anodised all as specified and as directed

Supply and fix mild steel of coldrolled butt hinges 100mm size, medium weight all as specified and as directed

Supply and fix sliding door bolts 250mm of aluminium alloy, anodised with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy all as specified and as directed

Supply and fix viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed

Supply and fix in repair PVC high or low level flushing cistern of 10 liters capacity (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever,Joint between flushing pipe and socket of W.C. pan pre-made, if any complete all as specified and as directed.

Supply and fix wash basins, vitreous China (flat back or angle back type) size 550x400 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed

Supply and fix 15 mm bore fancy type pillars taps chromium plated cast copper alloy with capstan head, long screwed shanks complete all as specified and as directed.

Supply and fix waste coupling of PTMT (half or full threaded) Minimum weight 32mm- 45gms complete all as specified and as directed.

Supply and fix vitreous China urinals, Half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

Supply and fix of 15mm dia concussive push button taps of cast copper alloy, chromium plated screwed for iron pipe and fixed all as specified and as directed.

Supply and fix urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum wt 60 gms) all as specified and as directed.

Supply and fix PVC flexible waste pipe 32mm dia complete all as specified and as directed.

Supply and fix in repairs 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement all as specified and as directed.

Material labour for Marble slab 18 to 20mm thick (table rubbed and polished) in partition, set cement mortar (1:4) complete all as specified and as directed.

Supply and fix rotational moulded Polyethylene water storage tank - 2000 liters capacity (cylidrical vertical with double layered, threaded top cover) hoisted and fixed in position all as specified in SSR part Iall as specified and as directed.

Supply and fix 20 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe of following sizes all as specified and as directed.

Supply and fix in repair fancy type brass chromium plated shower rose with arm complete all as specified and as directed.

Supply and fix chromium plated towel rail 20mm dia D type 60 cm long all as specified and as directed.

Supply and fix in repair CP soap disk fixed with screw to wall complete all as specified and as directed.

Material labour for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors all as specified and as directed.

Material labour for 20mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors all as specified and as directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified and as directed.

Supply and fix Bib taps cast copper alloy fancy type chromium plated 15mm bore fixed complete all as specified and as directed.

Supply and fix stop valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore all as specified and as directed.

Supply and fix stop valves fancy type chromium palted with long shank and cup (concealed type ) screwed for iron pipe of 15 mm bore

Supply and fix PVC connection 15 mm bore, 450 mm long complete with both ends unions all as specified and as directed.

Supply and fix 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and as directed.

Supply and fix PVC cowl 110 mm dia complete all as specified and as directed.

Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed.

All as per item No 68 above but 75mm dia

Supply and fix PVC (SWR) bends of any radius with access door bore of pipe 75 mm all as specified and as directed.

All as per item No.70 above but bore of pipe 110 mm with access door all as specified and as directed.

Supply and fix PVC SWR junction single(single T) equal or unequal with access door bore of pipe 110 mm all as specified and as directed.

Supply and fix PVC (SWR) reducers 110 mm all as specified and as directed.

Material and labour for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in copings/benching of manholes including weathering rounded/chamfered angles and throating as directed including necessary form work. Exposed surfaces of concrete shall be finished even and smooth with out using extra cement complete all as specified and as directed.

Material and labour for 100mm thick hard core of gauge n.exe.63mm with broken stone boulders, deposited spread and levelled in layers not exe 15 cm thick watered and rolled rammed to a true surfaces complete all as specified and as directed.

Material and labour for 40mm thick sand cushioning under floors/base or in foundations including watering and consolidation with proper camber.

Material and labour for laying of 60mm thick machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of M-50 Grade all as specified and directed.

Material and labour for providing, cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in kerbs stone, rounded or chamfered on edges

Removal of excavated material not exc 50 mtr and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m deep for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Material and labour for pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement all as specified and as directed.

Material and labour for deformed or twisted bars 6mm to 8mm dia, cut to length bent to shape required, incl cranking, bending spirally for hooking for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

Supply and fix 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in bed to drain pipes of bore 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

Material and labour for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces neeru finished even and smooth all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends all as specified and as directed.

Cutting into exisiting manholesforconnecting new drains, makinggood topipes and rendering ,cutting out existingbenching andforming branch channel, halfround or 3/4 section in cementconcrete1:2:4 type B smooth finished andreformingbenchingas required, internaldia of pipe150mm all as specified and as directed.

Dewatering cleaning of septic tanks including sludge chamber, mechanically with suction vechile mounted air and all other equipment required for lifting from septic tank/man holes and disposed of sludge out of MD land complete all as specified and as directed.

All as per item No 88 abovebut for desilting all as specified and as directed.

Dewatering cleaning of Sokage wells manual lifting including cleaning of shrubs/bushes vegetation around 2.50 m radius and making good to re use all as specified and as directed.

All as per item No 90 abovebut for desilting all as specified and as directed.

Demolition of conrete (Reinforced) as in floors and paving n.exc 15cm thickness (below or above ground level)un reinforced all as specified and as directed.

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for all as specified and as directed.

Demolition of brick work/ stone work built in cement mortar or cement lime mortar incl all quoins, arches, pillars , etc.all as specified and as directed.

Supply and fixing reinforced concrete pipes , class NP-2 laid and jointed complete with collars for 200mm bore pipe complete all as specified and as directed.

Material and labour for cement concrete bed (1:3:6) type C-2 using 40mm graded stone aggregate to drain pipe of 200mm bore including packing under hunching against the site of pipe after they are laid and tested all as specified and as directed.

Material and labour for cement concrete bed (1:3:6) type C-2 using 40mm graded stone aggregate to drain pipe of 150mm bore including packing under hunching against the site of pipe after they are laid and tested all as specified and as directed.

Material and labour for cement concrete type B-1 (using 20mm graded stone aggregate), 1:2:4 as in surface channels and drains all as specified and directed.

Supply and fix in repairs 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall complete all as specified and as directed.

Schudule 'A' Part II (E&M) Portion) Material and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm on surface including provn of pressed steel terminal box of suitable size with 3 mm thick plastic laminated sheet cover for mounting switch, socket along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm for One light point controlled by one switch one way 5 Amps all as specified and directed. (Note : Cost of for making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.)

All as per item No 100 but for One exhaust fan point controlled by one switch one way 5 Amps

All as per item No 100 above but one switch socket combination 15 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm

Supply and fixing switch piano flush type single pole one way switch 5 Amps

Supply and fixing switch socket combination multipurpose 5 A/16 Amps,5 in1,flush type.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm all as directed.

Supply & fix Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 20 Watt.Make : Havells. Cat No-LHEXACP7IN1W020 or equivelent WIPRO/CG/Bajaj/Philips

Supply and fix of 15 watts, 230 V LED light fitting for Building security LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete with bracket & clamps Make : Havells Cat Part No. ENDURAPEARLSL 15WLED757 SASYTOPC or equivalent make of Philips/OSRM/KRIPA.

Supply and fixing Exhaust fan 450 mm sweep, 230/240 volt AC single phase 410W, heavy duty 1400 RPM, along with louers adn connecting up including provision of 3 core flexible cable of size 0.5 sqmm from ceiling rose to connector grounting bollts of suitable size, accessaries Make Bajaj, code 70064.or eqvt. make: CG, WIPRO including cutting hole as per site requirement suitable for fixing exhaust fan and make good the surface to match with existing surface all as specified and directed.

Supply and fix sheet metal enclosure distribution box suitable for MCB'S 8 way SPN with 200 Amps rated bus bar , 240 volts double door complete including connecting up all as specified and making good distrubed surface

All as per item No 109 above but 4 way SPN with 200 Amps rated bus bar , 240 volts

Supply and fixingin MCB Single pole, 240 volts 5 to 32 Amps 10 KA rupturing capacity, C series

Supply and fixingin repair MCB Single pole & neutral 240volts 63 Amps, 10KA rupturing capacity, C series

Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit with 6 sqmm copper conductor cable as earth conductor of 4.0 sq mm and conduit accessories fixed up in surface including connecting up complete all as specified and directed.

Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of the plate at a depth not less than 1.5 m below ground level, connected to and including GI wire 4mm dia with GI protection pipe 15 mm dia light grade connected to and including by means of GI bolts, nuts, check nuts and washers all as shown in electric plate No 3 of SSR part I including neccesary excavation earth work in any strata. PCC 1:3:6, type C2 chamber, RCC 1:2:4, Type B1 cover slab 50mm thick with 8mm TMT bar 100mm centre to centre including 8mm dia handle and watering pipe medium grade 20mm bore, funnel, wire mesh, etc and testing on completion all as specified and directed.

Supply and lay, or fixing on wall surface with proper clamps under ground cable XLPE insulated screened PVC bedded, galvanized steel strip of wire armored, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor of size 6 sq mm x 2 core.

Supply and spread dry river sand in trenches for cable cushioning all as specified on both top and bottom of cable including ramming all as specified and directed Note:- For the purpose of payment the punned thickness only measured.

Supply and lay un-reinforced precast concrete cable cover, class LV, Type-I flat, size 250mm x 150mm x 40 mm for cable protection all as specified and directed.

Supply and fixing GI tubing light grade 40 mm dia for cable protection fixed along with steel tubular pole / RCC pole/ laying in ground including necessary clamp, nut, bolt, washers etc. all as directed at site.

Supply and lay pipe galvanized iron, “Medium grade”, including all fittings 25 mm (1”) dia fixed complete to walls laid in trenches.

Cutting / drilling existing cast iron pipe 80 mm for insertion of new tees, branches etc

Supply & fixing Gun metal gate valves with iron wheel head, screwd both ends for iron pipe 25 mm dia

Supply & fixing ball brass valves high pressure with polythene float and fly nut complete screwd for iron pipe.

BYRAVESHWARA CONSTUCTION

SRI LAKSHMI VENKATESHWARA ENTERPRISES

Maruthi constructions

Suneetha Engineers and Contractors

AAKAAR INTERIOR & CIVIL CONTRACTOR

Sri Maruthi Builders