Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹21.5 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹23.9 L+₹1.6 L (7.37%)Rejected-Finance MAGADH COLONY ROAD NO 6 PS MAGADH MEDICAL COLLEGE PO CHANDAUTI MORE DISTT GAYA BIHAR PIN 823001 | GAYA | BIHAR | 823001 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹24.4 L+₹2.2 L (9.68%)Rejected-Finance SHIV BHAWAN MAGADH COLONY ROAD NO 03 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | 3 | Rejected-Finance NOT LOWEST |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
22 Nov 2021, 6:00 pmClosed
GE GAYA
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar-823001
Repair/Replacement of internal pipe lines and certain other works in Md Accn and Periodical services to certain bldgs. in NCOs/OR quarters at Mil Stn Gaya
2021_MES_483995_1
8056/GE/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GAYA
₹60,000
Yes
24 Dec 2021
27 Oct 2021
23 Nov 2021
27 Oct 2021
22 Nov 2021
9 Nov 2021
Amount
Demolition of reinforced cement concrete of existing RCC water tanks on roof of bldgs or of any description not otherwise described all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M & L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for Providing, cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in cills, steps; seismic and other similar bands, plinth courses copings including necessary form work all as specified and as directed
Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.
Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.
Supplying and laying as in repair of CPVC pipes 32mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.
Supply and Fix CPVC fittings like Male Brass Threaded Adaptor (MTA/ MBTA) of 20mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like Male Brass Threaded Adaptor (MTA/ MBTA) of 25mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like Male Brass Threaded Adaptor (MTA/ MBTA) of 32mm outer diaall as specified and directed.
Supply and Fix CPVC fittings like Female Brass Threaded Adaptor (FTA/ FBTA) of 20mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like Female Brass Threaded Adaptor (FTA/ FBTA) of 25mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like Female Brass Threaded Adaptor (FTA/ FBTA) of 32mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like Brass Elbow of 20mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like Brass Elbow of 25mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like Brass Elbow of 32mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like Ball valve of 25mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like union of 20mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like union of 25mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like union of 32mm outer dia all as specified and directed.
Supply and Fix CPVC fittings like tank adaptor of 25mm outer dia all as specified and directed.
S & F in repair 25mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed.
S&F in repair white clolour rotational moulded three layer polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon
S&F in repair white colour rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon
S & F as in repair of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Water closet (Squatt pattern) complete including provision of lime concrete bedding complete all as specified and as directed Make : Hindware/Parryware/Cera
S & F in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete.
S & F in repairs vitreous China wash basin, white, flat back, size 550 x 400 mm including a pair of bracket, 32mm dia CP waste and 15mm bore CP pillar tap screwed to iron pipe complete all as specified and directed.
S & F in repairs 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repair 15 mm dia bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
S & F as in repair 15mm dia bore Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (Make-Prayag/Plumber/Parryware)
S&F in repair 15 mm dia one way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.(Make-Parryware/ Prayag/Hindware)
S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.(Make-Parryware/ Prayag/Hindware)
S&F PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed. Make : Prayag/Polytuff/Symet
M & L for rendering 15mm thick internal surfaces on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete.
M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement) complete.
M & L for rendering 10 mm thick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 10 mm thick internal surfaces on other than fair faces of brick work in CM 1:6 finished even and smooth without using extra ceemnt including taking dwon cement plaster complete all as specified and directed.
Supply only liquid Integral waterproofing compound (Make : Sika Latex Power)
M & L for preparing newly plastered or previously untreated walls surfaces or fascia or roof or chajjas and applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and directed.
M & L for 1 mm thick Birla white putty/JK white wall care putty on new plastered surfaces and making the surface uniform & smooth.
M & L for Preparation of new decorated surfaces of wall and ceiling and applying two coats of distempering with acrylic distemper as per manufacturer instructions white or tinted all as specified and directed.
M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M & L for coloured Glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed in CM 1:3 complete all as specified and directed.
S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place.
S & F 110mm dia bore PVC (SWR) bends with access door all as specified and as directed.
S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes all as specified.
S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete.
Dismantling of existing sunken treatment including plaster and M&L for water proofing treatment on existing sunken portion with the following specification complete all as specified and directed with (a) 15 mm thick ( average) plaster on sunken floor in CM (1:4) with waterproofing compound as per manufacturer instruction complete all as specified & directed . (b) Apply bituminous primer @0.5 kg/Sqm conforming to IS 3384-1965 on prepared surface till the surface is properly impregnated. (iii) Apply hot bitumen 85/25 grade @ 1.20 kgs/sqm confirming to IS 702-1988. (Iv) Laying polymeric water proofing memberae weight not less than 3.0 kgs/sqm as per manufacturer instructions confirming to IS. (v) Apply layer of blown grade bitumen 85/25 @ 1.2 Kgs/Sqm confirming to IS. (vi) One spout of 40 mm GI pipe shall be provided in sunken floor and sunken porion shall be filled with lean concrete Type E-2 (1:5:10) using brick aggregate complete.
Removing demolished material exc 50 mtr and n. exc 100 mtr and deposited where directed rubbish materials all as specifed and directed.
M & L for applying one coat of cement base paint as per manufacturer instruction on existing old treated walls surfaces including preparation of surfaces all as specified.
M & L for two coat of cement base paint as per manufacturer instruction on existing old treated surfaces of walls after preparation of surfaces all as specified.
M & L for Preparation of old decorated surfaces of walls and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed.
M & L for Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed.
M & L for Preparation of old decorated surfaces of wall and applying two coats of distempering with acrylic distemper as per manufacturer instructions white or tinted all as specified and directed.
M&L One coat of exterior weather coat paint with roller white or tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg all as specified & directed. Make :-Asian Paints (Brand-Asian Paints Apex)/ Berger paint (Brand -Weathercoat smooth)/ Nerolac paint ( Brand : Excel)
M&L for 0.50 mm thick Birla white putty/JK white wall care putty on old plastered surfaces of walls/Ceiling surfaces including removal of existing treatment.
M & L for apply one coat of synthetic enamel paint on old painted surfaces of wood and wood based of any description, over 10cm in width or girth complete all as specified and directed.
M & L for apply one coat of synthetic enamel paint on old painted surfaces of steel and steel based of any description, over 10cm in width or girth complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed.
Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.
S & F PVC waste pipe size 32 mm x 800 mm flexible with coupling for WHB and Sink etc. complete all as specified and directed.(Make-Prayag/Symet/Polytuff) as in repair
S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads or rubber beading in squares of any size complete all as specified and directed by Engr-in-charge.
S&F 4mm thick figured glass pin head type and glazing with oil putty or wooden beads or rubber beading in squares n exc 0.50 Sqm each pane complete all as specified and directed.
Taking down chowkhats or frames not exc 1.5 Sqm (without taking shutters from the frame).
Taking down chowkhats or frames exc 1.5 Sqm but exc 4.0 Sqm (without taking shutters from the frame).
S & F anodised aluminium frame/shutters for windows, ventilators sliding/openable etc including joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.
S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S & F as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length all as specified and directed by Engr-in-charge.
S & F as in repair of CPVC pipes 32mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length all as specified and directed by Engr-in-charge.
S&F Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (MTA/ FBTA) of 25 mm outer dia complete all specified and directed.
S & F of Statinless steel grade 304 of kitchen plate rack of 1200 x 900 mm complete Make Prayag/Nirali
S & F of Stainless steel Towel rack with lower hanger Make Jaguar Catpot No AHS-1581 or equivalent
S & F of Bathroom mirror & cabinet of size 450 x 600 mm Make Prayag Cat No. 555 or equivalent
S&F brass chromium plated health faucet 15 mm with flexible tube of stainless steel (1.50 mtr long) provided rubber hose and wall hook etc complete as in repair all as specified and as directed Make : Jaguar/Hindware/Kohler
M/S Sweta Construction
M/S ABHAY KUMAR AND BROTHERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .