SPECIAL REPAIR TO LT PANELS INCLUDING ALLIED WORKS AT RAKHMUTHI UNDER GE (SOUTH) AKHNOOR (SECOND CALL)

Amount

SITC in replacement of Factory made LT electrical panel cubical outdoor type AC, 3 phase, 4 wire, 415 / 500 V, 50 Hz, cubical OUTDOOR type, fabricated with CRCA sheet 3.15 mm thick (1500mmx1000mmx450mm), powder coated , CPRI Approved , bottom with detachable plates, front and rear with hinged type double door and locking arrangements, chamber for cable entry and exit, chamber for aluminium bus bars including aluminium bus bars 4 Nos, 300 amps capacity insulated with colored PVC sleeves, floor mounted on frame of mild steel angle iron 25x25x5mm, 30Cm above from the ground level duly supported with mild steel angle iron 40x40x5mm, embedded in Plain Cement Concrete M-10 (1:3:6), type C-1 (using 20mm graded crushed stone aggregates) 300mm below the ground level and required masonry in brick work in cement mortar 1:6 incl offsets all as per manufacturer's instructions and incl suitable insulators and separators, holes drilled for connections, complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete all as specified and comprising of the followings:- OUTGOING :- (a) MCCB 4 Pole, 415 V, Thermal Magnetic type with double break rotary mechanism of 125 Amps with breaking capacity 36 KA with ICS=100%ICU - 02 No. Make: Schneider CAT Part No. LV516342, or equivalent in Siemens/ABB (b) MCB single pole and neutral, 415 V, 20 Amp rating with sensitivity of 30 MA - 02 No. Make: Schneider /Siemens/ABB (c) Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100 Amps -01 No. Make: Schneider /Siemens/ABB (d) Astronomical timer switch including panel, contactor rating 32 Amps, Triple Pole-01 No . Make: Schneider/Siemens/ABB/Havells INCOMING:- (e) MCCB 4 Pole, 415 V, Thermal Magnetic type with double break rotary mechanism of 400 Amps with breaking capacity 36 KA ICS=100%ICU - 01 No Make: Schneider CAT Part No. LV540309, or equivalent in Siemens/ABB (f) AC Three phase static energy meter of accuracy class 1.0,3 X240 V,50 Hz with Backlit LCD display of rating 10 - 60 A (measures displays KWH, V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box-01 Nos (g) Phase indication lamps - 3 Nos. NOTE : Before placing purchase order of LT panel and accessories, The drawing of LT panel showing the required incomer and outgoing shall be got approved from the GE.

SITC in replacement of Factory made LT electrical panel cubical outdoor type AC, 3 phase, 4 wire, 415 / 500 V, 50 Hz, cubical OUTDOOR type, fabricated with CRCA sheet 3.15 mm thick (1200mmx1500mmx450mm), powder coated , CPRI Approved , bottom with detachable plates, front and rear with hinged type double door and locking arrangements, chamber for cable entry and exit, chamber for aluminium bus bars including aluminium bus bars 4 Nos, 300 amps capacity insulated with colored PVC sleeves, floor mounted on frame of mild steel angle iron 25x25x5mm, 30Cm above from the ground level duly supported with mild steel angle iron 40x40x5mm, embedded in Plain Cement Concrete M-10 (1:3:6), type C-1 (using 20mm graded crushed stone aggregates) 300mm below the ground level and required masonry in brick work in cement mortar 1:6 incl offsets all as per manufacturer's instructions and incl suitable insulators and separators, holes drilled for connections, complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete all as specified and comprising of the followings:- OUTGOING :- (a) MCCB 4 Pole, 415 V, Thermal Magnetic type with double break rotary mechanism of 63 Amps with breaking capacity 25 KA with ICS=100%ICU- 02 No. Make: Schneider CAT Part No. LV510315, or equivalent in Siemens/ABB (b) MCB 2 Pole, 415 V, 20 Amp rating with breaking capacity 10kA- 02 No (c) Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100 Amps -01 No (d) Astronomical timer switch including panel, contactor rating 32 Amps, Triple Pole-01 No INCOMING: (e) MCCB 4 Pole, 415 V, Thermal Magnetic type with double break rotary mechanism of 125 Amps with breaking capacity 25 KA with ICS=100%ICU- 01 No Make: Schneider CAT Part No. LV516312, or equivalent in Siemens/ABB (f) AC Three phase static energy meter of accuracy class 1.0 ,3 X240 V ,50 Hz with Backlit LCD display of rating 10 - 60 A (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box-01 Nos (q) Phase indication lamps - 3 Nos. NOTE : Before placing purchase order of LT panel and accessories, The drawing of LT panel showing the required incomer and outgoing shall be got approved from the GE.

SITC in replacement of Factory made LT feeder piller box type AC, 3 phase, 4 wire, 415 / 500 V, 50 Hz, cubical OUTDOOR type, fabricated with CRCA sheet 3.15 mm thick (450mmx450mmx200mm), powder coated , CPRI Approved , bottom with detachable plates, front and rear with hinged type double door and locking arrangements, chamber for cable entry and exit, chamber for aluminium bus bars including aluminium bus bars 4 Nos, 200 amps capacity insulated with colored PVC sleeves, floor mounted on frame of mild steel angle iron 25x25x5mm, 30Cm above from the ground level duly supported with mild steel angle iron, embedded in Plain Cement Concrete M-10 (1:3:6), type C-1 (using 20mm graded crushed stone aggregates) 300mm below the ground level and required masonry in brick work in cement mortar 1:6 incl offsets all as per manufacturer's instructionsss and incl suitable insulators and separators, holes drilled for connections, complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete all as specified.

S&F in replacement of MCB, single pole, 6 to 32 Amps, 10KA, 240 Volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

S&F in replacement of MCB, Single Pole and Neutral, 32 Amps, 240 volts, 10KA,, 50 Hz, 'C' curve including necessary incoming and outgoing electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

S&F in replacement of MCB, Single Pole and Neutral, 63 Amps, 240 volts, 10KA,, 50 Hz, 'C' curve including necessary incoming and outgoing electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

S&F in replacement of MCB, Triple Pole and Neutral, 63 Amps, 240 volts, 50 Hz, 10KA, 'C' curve including necessary incoming and outgoing electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

S&F in replacement of old unserviceable/ damaged MCCB with new MCCB, Four pole, 415 Volts, adjustable thermal and adjustable magnetic setting, 160 Amps with breaking capacity 25 KA, having indicating lamp, Ics=100% and Icu as per IEC 60947-2, complete all as specified and as directed. Make: Schneider cat part No- LV516313 or equivalent in Legrand/ ABB/ Siemens.

S&F in replacement of old unserviceable/ damaged MCCB with new MCCB, Four pole, 415 Volts, adjustable thermal and adjustable magnetic setting, 200 Amps with breaking capacity 25 KA, having indicating lamp, Ics=100% and Icu as per IEC 60947-2, complete all as specified and as directed. Make: Schneider cat part No- LV525312 or equivalent in Legrand/ ABB/ Siemens.

S&F in replacement of old unserviceable/ damaged MCCB with new MCCB, Four pole, 415 Volts, adjustable thermal and adjustable magnetic setting, 250 Amps with breaking capacity 25 KA, having indicating lamp, Ics=100% and Icu as per IEC 60947-2, complete all as specified and as directed. Make: Schneider cat part No- LV525313 or equivalent in Legrand/ ABB/ Siemens.

S&F in replacement of old unserviceable/ damaged MCCB with new MCCB, four pole, 415 Volts, adjustable thermal and adjustable magnetic setting, 320 Amps with breaking capacity 36 KA, having indicating lamp, Ics=100% and Icu as per IEC 60947-2, complete all as specified and as directed. Make: Schneider cat part No- LV540308 or equivalent in Legrand/ ABB/ Siemens.

S&F in replacement of old unserviceable/ damaged MCCB with new MCCB, four pole, 415 Volts, adjustable thermal and adjustable magnetic setting, 630 Amps with breaking capacity 36 KA, having indicating lamp, Ics=100% and Icu as per IEC 60947-2, complete all as specified and as directed. Make: Schneider cat part No- LV563309 or equivalent in Legrand/ ABB/ Siemens.

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 95 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 185 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 150 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 120 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 95 Sqmm 3.5 core fixed to walls/poles complete all as specified and directed. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 70 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 50 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 35 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 2.0 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 4.0 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 10 Sqmm 4.0 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 2.0 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S&F in replacement of LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 10 Sqmm 2.0 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. Note : - (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

Excavation in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50mtr in depth; not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in any type of soil, for laying pipe line/cable etc, complete all as specified and as directed by Engineer-In-Charge.

Returning filling in incl spreading watering and well ramming in layers in any type of soil each not exceeding 25cm thick complete all as specified.

Removing surplus soil to a distance not exe 50 mtr and depositing where directed at a level not exe 1.5 m above the starting point complete all as specified and directed.

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed by Engineer-In-Charge. Note: Punned thickness shall be measured.

Sub class ‘B’ bricks, modular size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning for mechanical protection of cable, with width equal to the length of the brick, complete all as specified and directed by Engineer-In-Charge.

S&F in replacement of old unserviceable/ damaged cable jointing kit with new cable jointing kit for Cable jointing kit for 1.1 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 16 sqmm to 35 sqmm, 3.5-core, complete all as specified and as directed by Engineer-In-Charge.

S&F in replacement of old unserviceable/ damaged cable jointing kit with new cable jointing kit for Cable jointing kit for 1.1 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm, 3.5-core, complete all as specified and as directed by Engineer-In-Charge.

S&F in replacement of old unserviceable/ damaged cable jointing kit with new cable jointing kit for Cable jointing kit for 1.1 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm, 3.5-core, complete all as specified and as directed by Engineer-In-Charge.

S&F in replacement of GI pipes/ Tubes, 'light grade', galvanised, 40mm bore, ISI marked, laid in trenches or fixed to walls/ poles with mild steel clamps, nuts, bolts and washers; for protection of electric cable, complete all as specified and as directed by Engineer-In-Charge.

S&F in replacement of old unserviceable/ damaged Change over switch with new Change over switch, in sheet metal enclosures ON LOAD, rating 125 Amps, four pole, 415 Volts, AC, 50 Hz, with center handle, conforms to IS:13947 (Part-3); IEC:60947-2, with stain less steel enclouser complete all as specified and as directed by Engineer-In-Charge. Make: Indo-Asian cat part No- ITAS0125 or equivalent in L&T/ Legrand/ ABB/ Siemens.

Supply only Copper tube terminal heavy duty (thimble) suitable for 16 Amps, complete all as specified and as directed by Engineer-In-Charge.

Supply only Copper tube terminal heavy duty (thimble) suitable for 25 Amps, complete all as specified and as directed by Engineer-In-Charge.

Supply only Copper tube terminal heavy duty (thimble) suitable for 50 Amps, complete all as specified and as directed by Engineer-In-Charge.

Supply only Copper tube terminal heavy duty (thimble) suitable for 70 Amps, complete all as specified and as directed by Engineer-In-Charge.

Supply only Copper tube terminal heavy duty (thimble) suitable for 120 Amps, complete all as specified and as directed by Engineer-In-Charge.

Supply only Copper tube terminal heavy duty (thimble) suitable for 185 Amps, complete all as specified and as directed by Engineer-In-Charge.

Supply only Copper tube terminal heavy duty (thimble) suitable for 240 Amps, complete all as specified and as directed by Engineer-In-Charge.

Supply only Copper tube terminal heavy duty (thimble) suitable for 300 Amps, complete all as specified and as directed by Engineer-In-Charge.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-40)%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Amount of Schedule of credit of for Rs 1,25,350.00 shall be deducted from quoted amount.

kailu construction co

MAMTA ENTERPRISES

darshan kumar gandhi

SHSS ASSOCIATES

Jiwan Singh

M/S ZTECH

M/S SHREE KRISHANA ENERPRISES