Renovation in PT3 Hangar building at SID

Amount

STEEL WORK

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. All heights upto 15.0 metre

FINISHING

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. All heights upto 15.0 metre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. All heights upto 15.0 metre Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. All heights upto 15.0 metre With water thinnable cement primer on wall surface having VOC content less than 50 grams/litreAll heights upto 15.0 metre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. All heights upto 15.0 metre

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : All heights upto 15.0 metre One or more coats on old work

REPAIRS TO BUILDING

Renewing glass panes, with putty and nails glazing clips in steel windows wherever necessary including racking out the old putty: All heights upto 15.0 metre Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

DISMANTLING AND DEMOLISHING

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : All heights upto 15.0 metre For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

MARKET RATE ITEMS

Removing of brocken glass panes in the existing steel window including stacking within 50 metres lead as per direction of Engineer-in-charge. All heights upto 15.0 metre

Providing and fixing of iron coated weld mesh of 12.5mmX12.5mm square gap for the window as per direction of Engineer-in-charge. All heights upto 15.0 metre

Providing and fixing 6mm thick safety wire glass in all respects at all heights directed by Engineer-in-Charge. All heights upto 15.0 metre

Providing & fixing Stainless steel(grade 304) wire gauze of 0.5mm dia wire and 1.4mm apertaure on both sides. fly proof wire gauze to windows, clerestory windows and doors with nuts and bolts complete. All heights upto 15.0 metre

V SIVA KUMAR (BID ID -797281)