REPAIR AND RE PAINTING OF STEEL LOCKER AT CMP C S, SSB AND 56 ASC AND POLISHING OF CERTAIN WOODEN FURNITURE AT OFFICE MD ACCN OF BSO(S)

Amount

Locker steel (Built in) (Applicable to items Nos 01 to 05) (FD-1029) Material and Labour for cleaning/preparing the existing surfaces of locker steel including inner and outer surfaces and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish all as directed and as shown on drg.

Removing the existing unserviceable/damaged/broken legs for lockers steel and supply & fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and providing rubber pad 3mm thick for legs all as specified and as shown on drgs.

Removing the existing unserviceable/damaged hanging rod and supply and fix new hanging rod 20 mm dia steel chromium plated conduit pipe and two sockets shall be provided at the end of hanging rod.

Removing the existing unserviceable/damaged handle and supply and fix new chromium plated handle 100 mm long to locker steel fixed to shutters all as specified/directed and as shown on drg

Removing the existing unserviceable/damaged Hasp and staple and supply and fix new cromium plated hasp & staple 75 mm long to locker steel all as specified/directed and as shown on drg.

Almirah large steel (FD-1031 ) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah large steel complete as shown on drgs and all as directed by the Engr in Charge

Almiirah small steel (FD-1032) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah medium steel complete as shown on drgs and all as directed by the Engr in Charge

Almirah large steel / Small steel (Applicable to items Nos 08 to 16) (FD-1031 FD-1032 FD-67) Removing the existing unserviceable lock and supply and fix new lock appropriate size, 6 levers with duplicate keys chromium plated or equivalent as suitable in almirah large/ medium steel as shown on drgs and all as directed. Notes : (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Removing the existing steel chromium plated handle and supply and fix new handles shall be measured and paid separately.

Removing the existing unserviceable handle and supply and fix new chromium plated M S handle 125mm long to almirah large/medium steel as shown on drg and all as specified and as directed.

Removing the existing unserviceable clamps for shelves and spot welding the shelves to almirah sides as directed and shown on drgs for almirah large/medium steel. Note:- Welding each shelf completely will be measured as a single unit.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah large steel of Size 920 x 485 x 1985mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah medium steel of Size 760mm x 440mm x 1270 mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete all as specified and as directed.

Removing the existing unserviceable/ damaged shelves for almirah large steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drg.

Removing the existing unserviceable/ damaged shelves for almirah medium steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drgs.

Removing the existing unserviceable/ damaged/ broken legs for almirah large and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drgs.

Removing the existing unserviceable/ damaged/ broken legs for almirah medium and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drgs.

Chair writing steel (Applicable to item Nos 17 to 20) (FD/E6/MAP/12) Removing the existing unserviceable damaged 120mm hot pressed plywood and supply and fix new 120mm hot pressed plywood of approx size 950mmx500mm upholstered with fabric and moulded polyurethane foam with pvc lipping all round.

Removing the existing unserviceable damaged foam and supply and fix new polyurethane foam of approx size 950mmx500mm shall be 50mm thick and shall be moulded with density 50-55 kgs per cum and hardness 20 +/- 2 kgs/m2 on hampden machine.

Removing the existing unserviceable damaged armrest and supply and fix new armrest made of black integral skin polyurethane with 75-85 hardness and reinforced with MS insert it shall be scratch and wheather resistant both hand rest sections to have slope towards front.

Removing the existing unserviceable damaged contoured lumber support and supply and fix new contoured lumber support for extra comfort.

Chair computer/Chair revolving (Applicable to item Nos 21 to 25) (FD/E6/MAP/ 01) Removing the existing un serviceable seat (cushioned) and back supply and fix the new seat and back of seat 510mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with fabric and moulded polyurethane foam with PVC lipping.

Removing the existing broken bottom gas lift (Up & Down) hydraulic with pouch (Maintenance free environmental friendly, chrome free cylinder tube shll be fixed in a MS black powder coated outer central column tube 38 mm dia and 2mm thick. It shall have 100 mm stroke length and gas pressure of 300 newton force, should under go an impact test)from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch of Make : Godrej or equivelent Note : Adjustable Tilting Mechanism to be designed with the following mechanism. Forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement)

Removing the existing broken twin caster wheel from revolving chairs ,computer chairs ,Tables TV Trolley etc ,supply and fix new fibre caster wheel.

Removing the existing broken Pedestal assy (injection moulded in black 30% Glass filled nylone A 10.5 MM dia forged bright Zinc plated MS castor pin is of press fitted into each prong for holding the cators. It is 600 mm pitch-centre Dia) from revolving chairs & computer chairs ,supply and fix new Fibre Stem Base.

Removing the existing broken padded Arm rest (Black integral skin polyurethane finforced with MS insert. It shall be scratch and weather reisistant) as per sample from revolving chairs & computer chairs ,supply and fix new arm rest

Charpoy GI Pipe with Plywood top (Applicable to item Nos 26 to 28) (FD-220) Removing the existing unserviceable plywood from Charpoy GI pipe Plywood top S&F new plywood BWR Grade ISI marked of size 1980 mm x 900 mm rounded edges on four corner and fixed with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge. Note : New plywood incorporated will be measured and paid seperately as supply only under relevant item of this schedule.

Material and labour for angle iron pieces, 2 Nos of size 25 x 25 x 5 mm thick, 850 mm long and welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes wherever required for fixing plywood with bolts and painting to angle iron pieces with two coats of black synthetic enamel paint over a coat of red oxide primer all as specified and as directed by the Engineer-in-Charge.

Supply only new plywood BWR Grade ISI marked of size 1980mm x 900mm x 12mm all as specified/directed and as shown on drg.

Bed plywood top with MNF set (Applicable to item No 29 to 22) (FD-246) Removing the existing unserviceable broken wooden long rail and supply of first class hard wood (Teak wood) new long rail of size 35mmx90mmx1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles as shown on drg and as as directed.

Removing the existing unserviceable broken wooden head board including legs and supply and fix 900x400mm new head board including teak wood legs of size 60mmx60mmx400mm and all as specified and as shown on drgs.

Removing the existing unserviceable /broken foot board including legs and supply and fix 900x300mm new foot board including teak wood legs of size 60mmx60mmx30mm and all as specified/directed and as shown on drg.

Removing the existing unserviceable /broken wooden stiffeners (supporting pieces) and supply and fix first class hard wooden stiffeners of size 40cmx60cm complete all as specified/directed and as shown on drg.

Removing the existing unserviceable plywood and supply and fix 900mmx1800mm x 12mm thick plywood commercial BWR grade bearing ISI marked all as specified/directed and as shown on drg.

Charpoy MS Square NCOs (Applicable to item Nos 34 to 35) (FD/MAP II/01 ) Removing the existing plywood from charpoy MS Square NCO's and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the plywood charpoy MS Square etc complete all as specified and as directed. Note : New plywood incorporated will be measured and paid seperately under relevant item of this schedule.

Supply only new plywood BWR Grade ISI marked of size 1980mm x 900mm x 12mm all as specified/directed and as shown on drg.

Table office clerk steel (Applicable to items Nos 36 to 38) (FD-1004 ) Material and Labour for cleaning / preparing the existing surfaces of table office clerks steel including inner surfaces of steel drawers and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish and to fix hard rubber shoe for legs all as directed.

Removing the existing unserviceable drawers of table office clerk steel and supply and fix new drawer made of MS sheet CRC 1 mm thick bent to shape to its original position and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified and as shown on drgs.

Removing the existing unserviceable top and supply and fix 18 mm thick particle board commercial exterior grade all as specified/directed and as shown on drg.

Bed plywood top (FD-246) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Chair dining Map : (FD/MAP II/04) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed.

Chair Easy (FD-17 FD-229) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Hat stand with mirror (FD-233) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Peg table (FD-384 FD-25 FD-236) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Sofa Set 5 Seater (FD-281) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table Centre (FD-29 FD-274 FD-235) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table dining 6 persons (FD-273 FD-239) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table writing (FD-249 FD-33 FD-275) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Teapoy (FD-34 FD-278 FD-232 FD-382 ) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

REENA INDUSTRIES

Vivek Engineers