SPECIAL REPAIR TO BLDG NO P 114 AT AUNDH UNDER GE MH RH KHADKI

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris out side MD land complete all as specified and as directed by Engineer - in - Charge.

M & L for Non Skid Ceramic tiles, Coloured, of size exceeding 0.06 Sqm and not exceeding 0.11 Sqm,7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile and laid over and including screed bed or bedding layer of cement mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed by Engineer - in - Charge.

M & L for Glazed Ceramic Coloured tiles of size 300mm X 600mm X 7mm as on Vertical Surfaces such as Skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile and laid over and including backing coat of 10mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer - in - Charge.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc and including removal of debris out side MD land complete all as specified and as directed by Engineer - in - Charge.

M & L for rendering to internal brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6 , surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer - in - Charge.

M & L for rendering 10 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer - in - Charge.

M & L for preparation of newly plaster surfaces of wall and applying two coats of oil bound distempering over a coat of primer over wall care putty not less than 1mm thick complete all as specified and as directed by Engineer - in - Charge.

M & L for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer - in - Charge.

Taking down Chowkat or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each complete all as specified and as directed by Engineer - in - Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

S & F Factory made coloured solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing of Sintex or its equivalent make given under list of makes complete all as specified and as directed by Engineer - in - Charge.

S & F Aluminium anodised barrel tower Bolt of size 150 mm size of extruded section complete all as specified and as directed by Engineer - in - Charge.

S & F Aluminium cast type anodised Handle, size 150mm long complete all as specified and as directed by Engineer - in - Charge.

S & F 100 mm size, heavy weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed by Engineer - in - Charge.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed.

M&L 20mm Granite work (table rubbed and polished) in steps, jambs, cills, WHB platforms, counter tops and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 20mm Screed bed in CM 1:4, complete all as specified and as directed by Engineer - in - Charge. Note : The rate quoted is deemed to be included for full moulding of edges and making, opening for kitchen sink etc all as directed by Engr-in-Charge.

M&L for 20-25mm thick machine cut cuddappah stone as in slab flooring over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl grinding polishing and laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer - in - Charge.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer - in - Charge.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer - in - Charge.

S&F 20mm bore GI tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors all as specified and as directed

Cutting chases, pinning in concrete block walls, making good to facing where required and pointing in cement mortar 1:3 and making good , cutting n.exc 10cm girth all as specified and directed.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

S&F in repairs for fancy type toilet paper holder Chromium plated brass with flap gaurd complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs fency type CP soap Dispenser complete all as specified and as directed by the Engineer-in-Charge

S&F in repairs fancy type two way Bib cock 15mm dia , fancy type, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed complete all as specified and as directed by the Engineer-in-Charge

S&F in repairs for towel ring chromium plated brass fancy type complete all as specified and as directed by the Engineer-in-Charge.

S/F in repairs for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed.

S&F in repairs for Corner glass shelf with 200mm dia or above with stainless steel hinges and chromium finish holders/wall of approved make complete all as specified and as directed by the Engineer-in-Charge

S & F in repairs for fancy type CP brass angular stop cock 15 mm dia complete all as specified and as directed by the Engineer-in-Charge

S & F in repairs fancy type CP brass , chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts, complete all as specified and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, complete all as specified and directed.

S & F in repais fency type tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, all as specified and directed.

S & F in repairs fancy type heavy duty health faucet chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe all as specified and directed

S & F in repairs fancy type for 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs PTMT grating ring or frame square or round 100mm size complete all as specified and directed.

S & F in repairs wash down water closet EWC vitrious china white in colour one piece (incl flush cistern , seat cover) with all fittings & fixures complete and fixing with outlet pipe complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs for under counter sunk vitreous china wash hand basin white size 460x342/560x450mm or above miniumum depth 155mm or above under counter oval type including bottal trap, coupling making good as specified and directed.and all connecting accessories, etc (first quality) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs chromium plated single lever basin mixer without popup waste system with 450mm long braided hoses complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Vitreous china Urinal half stall type white, with grating and union for discharge pipe fixed icluding all reqd necessary fittings as instructions of manufacturers, bottal trap , fixing to existing wall complete all as specified and as directed by the Engineer-in-Charge

S&F in repair110mm dia PVC (SWR) pipes Type B,single socketed in any length with rubber ring joints laid in trenches or floor & wall complete all as specified and as directed by the Engineer-in-Charge

S&F in repair 75 mm dia PVC (SWR) pipes Type B ,single socketed in any length with rubber ring joints fixed and laid in trenches or floor/ceiling and wall complete all as specified and as directed by the Engineer-in-Charge

S&F in repair 110mm dia PVC (SWR) bends any radius, for pipe complete all as specified and as directed by the Engineer-in-Charge

S&F in repair 75mm dia PVC (SWR) bends any radius, complete all as specified and as directed by the Engineer-in-Charge

S&F in repairs 110 mm bore PVC (SWR) branch piece , single Y equal or unequal complete all as specified and as directed by the Engineer-in-Charge

S&F in repairs 110mm bore PVC (SWR) junction single T equal or unequal complete all as specified and as directed by the Engineer-in-Charge

Demolition of cement concrete (un-reinforced ) of any description and in any position not otherwise specifically provided for including removal of debris out side MD land complete all as specified and as directedby Engineer - in - Charge.

M & L for PCC M-5 grade (Nominal Mix) using 40mm graded burnt bricks aggregate as in foundation filling & mass concrete or as in sunken floors complete all as specified and as directedby Engineer - in - Charge.

M&L for water proofing treatment to RCC sunken slab (n.exc. 45 cm depth of sunken) complete all as specified and as directed consisting of following steps:- (a) Providing rendering to brick / concrete surfaces of sunken slab floor and vertical sides, 15 mm thick in Cement Mortar 1:3, surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make @ 0.40 Ltr per 50Kg of cementcomplete all as specified and as directedby Engineer - in - Charge. Note: Liquid water proofing compound will be measured and paid separately (b) Providing and fixing of 40-50mm dia GI pipe medium grade / spout pipe by cutting through walls complete (c) Creating fillet coving of 50x50 mm with polymer modified mortar (d) Applying first coat of two component modified polymer coating on horizontal and verticle surfaces. (e) Providing of glass fiber mesh 2 x 2 mm immediately on above polymer coating (f) Apply second coat of two component modified polymer coating after 72 hrs . Note: plastered , PCC paid shall be paid sepratelyand plan area shall be measured

Supply only liquid water proofing compound [ISI marked] of approved make.

M&L in repair 75mm dia CI Nahani trap, with grating including jointing to waste pipe fixed in cement concrete M-15 grade ( Nominal Mix) using 20mm graded stone aggregate complete all as specified and as directedby Engineer - in - Charge.

M&L 25mm thick cement concrete M-15 grade ( Nominal Mix) using 12.5mm graded stone aggregate as in sub floor, finished even and rough to receive the topping layer all as specified and directed

M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and finishing surface even and fair by mixing liquid water proofing compound as per manufacturers instructions including uprooting/cutting of vegetation growth (maximum height upto three stories)complete all as specified and as directedby Engineer - in - Charge. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L for water proofing treatment of External plaster walls, chhajjas DFT: 110 microns by applying two coats of elestromeric coating Raincoat, material covering capabity 3 Sqm per litre in 2 Coats without dilution & 1 coat of efflorescent resistant primer 10sqm/litre/coat after cleaning the surface throughly and sealing all cracks with acrylic sealing compound as per the manufacturers specifications and directions of Engr-in-Charge Make :- Raincoat shall be of PlDlLlTE or equivalent make given under list of makes. The product shall have following properties: Elongation > 100% as per ASTM D 412, Tensile strength : 2.5 Mpa as per ASTM D 412, Water Resistance conforming to SS 500, Crack bridging ability conforming to Class A4 as per EN 1062 Part 7, Positive hydrostatic pressure > 7 bar as per DIN 1048, Anti-carbonation property complying EN 1062 Part 6, RCPT conforming to ASTM C 1202.

M & L for providing water proofing plaster at the junction of wall & slab at chajja, lintel etc of avg thickness 20mm in CM 1:3 by mixing liquid water proofing compound as per manufacturers instructions, finishing even and fair without using extra cement complete all as specified and as directedby Engineer - in - Charge. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removal of debris out side MD land complete all as specified and as directed by Engineer - in - Charge.

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate) masonary with solid blocks, exc , 10cm in width and setting in cement mortar 1:6 complete all as specified and as directedby Engineer - in - Charge.

M&L Coloured glazed ceramic tiles 7mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile and laid over and including 15 mm thick screed in CM 1:4 complete all as specified and as directedby Engineer - in - Charge.

All as per item No 59 above but as in skirting over 10 mm thick rendering in cm 1:4 all as directed.

M & L for 75mm thick, PCC M-10 grade (Nominal Mix), using 40mm graded stone aggregate as in Plinth protection etc surface finished even and fairwithout using extra cement including necessary form work if required, provision of vertical joints at 2m centre to centre all as directed by Engr -in- charge.

S&F Pre Polished Chequered cement concrete tiles glossy and rubburised finish 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in CM 1:6 under tiles incl all as specified and directed by Engineer-in Charge.

S&F for decorative/fancy type powder coated aluminium pipe 25mm dia and 2mm thick as in curtain rod fixed to brackets complete all as specified and directed. (shade and design as approved by GE) Note : Brackets shall be measured and paid separately

S&F decorative/fancy type powder coated aluminium brackets fancy type for curtain rods complete all as specified and directed.(shade and design as approved by GE)

.M&L for complete removal of existing finishes and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer including chalk whiting preparation of old surfaces , complete all as specified and as directedby Engineer - in - Charge.

M & L for applying one coat of white wash on celing on old surfaces including preparation of old surfaces including spot of nail filled with putty complete match to old surface all as specified and directed.

Material & Labour for preparation to new plaster surface and applying finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for complete removal of existing treatment, preparing the surfaces and applying two coats of Finishing walls with Premium Acrylic Smooth exterior emulsion paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)® upto 2 storey complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position, not otherwise specifically provided for and M & L for cement concrete M-15 grade (Nominal Mix) , using 12.5mm graded stone aggregates for filleting, benching, slightly rounding or chamfering on edges, filling undulations / depressions in roof surface, providing concrete platform for tanks wherever required as directed.

Taking down / removing existing water proofing treatment from RCC roof slab including removal of plaster bed below felt / membrane and disposal of the same to distance exceeding 50m but not exceeding 100m as and where directed and M & L for 10 mm thick screeding / rendering in cement mortar 1:3 on concrete roof surface, using Water Proofing Compound @ 3% by weight of cement, surface finished even and smooth without using extra cement all as directed. Note: Water Proofing Compound shall be measured and paid separately.

Supply only intergral water proofing compound.

M&L for Cutting out cracks to "V" section in existing roofs or terracing, cleaning out wetting grouting with cement and sand slurry 1:3

M & L for cleaning the plastered / concrete surface with wire brush and applying APP (Atactic Poly Propylene) bitumen membrane 3mm thick APP modified weight not less than 3.60 Kg/Sqm reinforced with non woven polyester fibre of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer 0.40Kg/Sqm over roof ( An overlap of 100mm & 150mm shall be provided on sides and ends respectively ) complete all as per manufacturers instructiand applying two coat of solar reflective aluminium paint@ 100ml per Sqm on membrane surfaces complete all as specified and as directed by Engineer in charge.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to steel window with nut bolt,fixed complete all as specified and directed.

S&F in repairs 18-19mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as sepcified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50m but n. exc 4.00 sqm

S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.

M&L for PCC cement concrete M-15 grade ( Nominal Mix) using 12.5 mm graded stone aggregate in door and windows frames, any size, single or double rebated, including arrangement for fixing of hinges and fixtures as required

Supplied and fixed in repair 2nd class hard wood 35 mm thick factory made Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); all as directed.

S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed.

S & F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fix 150mm long.

S & F 150 mm size Mild steel pressed handles, oval type, stove enamelled black complete.

S & F in repair Mild steel Butt hinges100 mm long, medium weight, cold rolled steel.

S & F Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed & fixed length of bolt 250 mm all as directed.

M & L for preparation of old steel surfaces exc 10 cm width or girth and applying one coats of synthetic enameled paint .complete all as specified and as directed by Engineer -in- Charge

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of width or girth exceeding 10 cm including preparation of surfaces all as specified.

M/L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handle, etc. all as sepcified and directed.

S & F in repair steel windows with side hung shutters including projected type hinges with steel handle steel peg stay complete with glazing bar dovetailed / welded all as directed.

M&L 20-25 mm thick machine cut machine polished kota stone slab flooring as in flooring etc and laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, and laid over and including 15 mm thick screed bed or bedding in CM 1:3 for laying floor finishes, all as specified and directed.

All as item No 89 here in before but in skirting but one piece for step riser over and incl 10 mm thick rendering in CM 1:3 to receive kota stone/slab etc all as specified and directed.

S & F in repair 1mm thick mild steel plain sheet in hearth, covering to door shutters, covering to door chowket (frames) etc all as specified and directed

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip S&F in ordinary glass 3mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S & F in repairs , mild steel window handle ,complete all as specified and as directedby Engineer - in - Charge.

Supply and fixing in repairs galvanized mild steel wire-cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete .

S&F in repair (any type & size of door) aluminium anodised door with frame and shutter and glazing 5 mm thick tinted glass or 12 mm thick prelaminated particle board exterior grade in panels, rubber gasket, aluminium glazing clips, mortice lock, Aluminium stopper cleat, hydraulic double action floor door spring, iron mongary etc. section of aluminium door including powder coating of any colour (min thickness of powder coating 50 micron) shall be of following sizes:- Frame : 100 x 44 x 1.80 mm thick with rawal plug Middle lock rail: 100 x 44 x 1.80 mm thick Bottom rail : 100 x 44 x 1.80 mm thick Top rail / Style: 46 x 44 x 1.80 mm thick Glazing beading: 0.70 mm thick Aluminium handle 'D' type: 150 mm Aluminium tower bolt 9.9 mm dia shoot 200 mm long Mortice lock – 100 mm 4 lever, Aluminium stopper cleat Note :- (i) Making good of wall surface with matching to existing surface complete all as specified and directed. (ii) Making good floor surface after fixed hydraulic double action floor door spring with matching to existing surface complete all as specified and directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade including all as directed by Engr-in-Charge.

S&F in repairs Powder coated Alu grill of approved pattern using channel of required size, screwed to windows & ventilators with self tapping screws all as specified & directed

S&F aluminium powder coated louvered ventilators of section size 100mmx45mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. all as directed by Engr-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and sheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade PVC casing & capping of suitable size on walls/roof/floor etc, ISI marked with suitable accessories , mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally , to provision of Modular switches to house switch/regulators etc including Modular Plate and Covers for , including PVC insulated multistranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr in charge for the following

One fan/light /bell point controlled by one switch/bell push

One 3 pin 5 Amps socket on same board control with other switches on same board

One 3 pin 5 Amps socket on independent board

All as per Item No 101.00here-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor for Power Socket on independent board complete all as specified and directed.

All as per Item No 101.00 .here-in- before but with 4 Sqmm PVC insulated multistranded copper conductor with 4 sqmm cable as earth continuity conductor for Power Socket/AC/Geysers on independent board complete all as specified and directed.

Supply and fix modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular socket 16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular switch 1way 16A 1 module complete all as specified and directed.

Supply and fix Modular fan regulator

Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed.

Supply & fix LED fitting for Bldg security, 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete. including connecting with 1.5 sq mm copper conductor 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts of suitable size and necessary GI bracket made of 32 mm light grade GI pipe of 1 mtr length with necessary bending complete all as specified and directed .

Supply and fixing LED lights fitting 1x 20W, 220V,AC, decorative box type with driver, holder incl LED type light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in repairs wall/ceiling mounted LED tube light fitting , Energy efficient with aluminium housing high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K (4 feets long) , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Note :- The unit rate quoted shall be deemed to include cost of ceiling rose -01 nos and square box-02 nos including suitable size of clamps and screws etc.

S & F in repairs wall study lamp LED bush light with die cast aluminium housing with toughened glass 6 watts including necessary electric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose/junction box to fitting terminal complete all as specified and directed.

Taking down unserviceable sub main wiring and M&L for sub main wiring in PVC conduit with two runs of 10 sq mm and one runs of 10 sqmm for earth continuity 1100v grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including PVC casing capping medium grade ISI marked (IS 9537 Part III)of width not less than 32 mm including accessories such as bends, supports etc all as specified and directed. Note: Two runs of 10 sq mm and one runs of 10 sqmm earth continuity cable and PVC casing capping shall be measured as one unit length.

Taking down unserviceable sub main wiring and M&L for sub main wiring in PVC conduit with two runs of 6Sqmm and one runs of 6Sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including PVC casing capping medium grade ISI marked (IS 9537 Part III) of width not less than 32mm including accessories such as bends, supports etc all as specified and directed. Note: Two runs of 6sqmm and one runs of 6sqmm earth continuity cable and PVC casing capping shall be measured as one unit length.

S & F in repairs sheet metal enclosures for double door distribution board factory made duly painted 4way TPN and neutral 440 v with 200 amps rated bus bar concealed in wall , suitable for fixing MCB /Isolators all as specified

S & F MCB DB SPN 4 way of any size and capacity double door type horizontal with 200A busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed.

S & F MCB DB SPN 12 way of any size and capacity double door type horizontal with 200A busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed.

S & F MCB SP of capacity 5A - 32A "B' curve all as specified and directed.

S&F MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve all as specified and directed.

SPN 40/63 Amps ,240V, 10 KA 'C' curve

S & F in repair MCCB of capacity 100 Amps, 4 pole, Breaking capacity 16 KA, 415 V adjustable type all as specified

Material and labour for earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and including 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

Taking down old unsv exhaust fan and depositing it to MES store and Supply and fix Exhaust fan steel body AC single phase , 230 volts of size 300 mm sweep with blades and frame and louvers complete all as specified. Note : (i) To be Fixed in Existing Toilet window (ii) The rates are inclusive of any civil work required to fix the exhaust fan.

Taking down old unsv ceiling fan and depositing it to MES store and Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator/remote and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). complete all as specified and directed.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amp DP MCB all as specified and directed ( For Geyser)

Dismantling old water geyser of any type/capacity and depositing it to MES store and Supply and fix (Geyser) Water heater storage type of capacity 50 Litres vertical type wall mounted including 15/16 Amps plug top with suitable wall supports and for manual operation, digital temperature display, feather touch buttons, built in thermostat, auto shut off, powder coated single line weld container with PUF insulation, heating element capacity of 2 KW, voltage rating 230 Volt, frequency 50 Hz, 5 star rated with and including steel braided connecting hoses of required length for Hot and cold water pipe, connecting to CPVC and GI pipe all as specified and directed by Engr-in-Charge. Note :- (i) The unit rate quoted shall be deemed to include all the minor spares (Fasteners, Nut bolts washers etc) required for making the geyser fully functional. (ii) The unit rate quoted shall be deemed to include the cost of GI / CPVC pipe of dia 15/20mm upto length of 2m as and where required.

Supply and fix Hot water pillar taps 15 mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed all as specified and directed by Engr-in-Charge.

Supply and fix Stop Valves , cast copper alloy, screwed down , high pressure with crutch or butter fly handle , screwed both ends for iron pipe or for unions and fixed of size 15 mm all as specified and directed by Engr-in-Charge.

vishalconstruction (BID ID -3294798)

United Sales Corporation (BID ID -3298541)

MAHESH DADAJI BACHHAV (BID ID -3294850)

Priyanka Power line (BID ID -3294708)

Bidder Name

United Sales Corporation

Priyanka Power line

vishalconstruction

MAHESH DADAJI BACHHAV

ShreHari Civil Enginneering and Contractors