Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.3 LAccepted-AOC VILL DURGA NAGAR CHECK POST PO ETHELBARI DIST ALIPURDUAR PIN 735204 WB | ALIPURDUAR | WEST BENGAL | 735204 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹41.9 L+₹3.0 L (7.70%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹44.7 L+₹5.7 L (14.7%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹45.2 L+₹6.3 L (16.1%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹45.8 L+₹6.9 L (17.7%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹47.2 L
EMD Value
₹94,360
Closing Date
7 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
SPL REPAIR TO BLDG NO HA-04 HA-06 TB-17 SP-16 AND SP-17 AT BAGRAKOTE UNDER GE SEVOKE ROAD
2023_MES_619716_2
8241/SEV OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹94,360
Yes
17 Jan 2024
23 Nov 2023
15 Dec 2023
23 Nov 2023
7 Dec 2023
1 Dec 2023
24 Nov 2023 - 27 Nov 2023
Amount
Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) removing rubbish off the premises etc complete all as specified and directed
Demolition of concrete (reinforced) of any description and in in any position not otherwise specifically provided for, removing rubbish off the premises etc complete all as specified and directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facingsdressed stonework and precast articles complete all as specified and as directed.
Dismantling of timer scantling 40 sqcm and over in section in any position in unframed work complete all as specified and as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each, including guard bar complete all as specified and directed.
Taking down chowkhats or frame with shutters (without taking off shutters from frames) exceeding 1.5 sqmtr but not exceeding 4 sq m each, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any thickness, complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and directed.
Dismantling floor hearth or wall tiling and stone slabs including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris as directed including necessary scaffoldings etc complete all as specified and directed
Taking up or down 15 mm bore steel water tubing and connections complete all as specified.
Taking up or down 20 mm bore steel water tubing and connections complete all as specified.
Dismantling of 100mm bore cast iron or reinforced concrete drains pipe jointed incement mortar and taking outtrenches if required complete all as specified and as directed.
Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, cable trench etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.
Materials and Labour for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work complete all as specified and as directed.
Materials and Labour for reinforced cement concrete (1:1.5:3) type B1 (nominal mix) using 20 mm graded stone aggregate as in beams, cantilevers, lintel over 1.5 m span, including necessary formwork, complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately).
Materials and Labour for reinforced cement concrete (1:1.5:3) type B1 (nominal mix) using 20 mm graded stone aggregate as in slab supported on walls complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).
Materials and labour for brick work with sub class 'B' burnt clay bricks straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed.
Materials and labour for brick work with sub class 'B' burnt clay bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat surface) complete all as specified and directed.
Use and waste of formwork to edges of concret flats treads , breaks in floors window cills concrete raillings openings in concrete walls , floor and rooffs n exc 20 cm wide and sides of RCC/PCC bands in walls horizontal or sloping andsimilar work exc 5 cm but n exc 10 cm wide complete all as specified and as directed.
Supply and fixing 35mm thick second class class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed.
Supply and fixing flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F factory made 35mm thick plain, framed panelled shutter (two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm veneered particle board with commerical veneering in both faces. The size of rails and stiles shall be as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated of 2nd class hard wood (Hollock/Sal/Kalasiris), complete all as specified and directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete all as specified and directed.
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area not exceeding 2.00 sqm
Supply and fixing mild steel tower bolts stove enamelled black with bright bolt 200 mm long complete all as specified and as directed.
Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 200 mm long, complete all as specified and directed.
Supply and fixing for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
Supply and fixing mild steel stove enamelled black 300mm long ordinary rat rail rod pattern spring fixed with screws to wooden chowkhats or welding to steel chowhats, complete all as specified and directed
Supply and fixing aluminum anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
Supply and fixing Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples complete all as specified and directed.
Supply and fixing mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and as directed.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodized, 150 mm size , complete all as specified and directed.
Supply and fixing Mild Steel flat iron fillets fixed to fly proof steel window shutters with screws or riveted for securing wiring gauze etc and as in wind tiles for roof complete as specified and directed.
Supply & fixing mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
Supply & fixing Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.
Supply & fixing Mild steel screw bolt not exc 5 to 10 mm dia neck, purpose made with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 10 cm long complete all as specified and as directed.
Materials and Labour for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
All as per item No.43 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as directed.
Supply & fixing rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 290 Gde-E 165) complete all as specified and as directed.
Supply and fixing roof trusses (framed) trussed,purlins, crane gantries, rails and fastening and heavy bracket framing (beam., tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe-410-W Gde-E-250 of Fe-310-0) complete all as specified and as directed.
Supply and fixing Steel rolling shutters of thickness 1.25 mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type complete all as specified and directed including taking down old rusted unserviceable rolling shutter.
Supply and fixing Safety lever locks mild steel with 4 levers for rolling shutters complete as specified.
Supply and fixing ball bearing for rolling shutter complete as specified.
Supply and fixing Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per item No.50 above, but without glazing bars complete all as specified and directed.
Supply and fixing steel ventilators with top hung shutter including hinges,steel peg stay, including one shop coat of Zinc Chrome primer complete all as specified and directed.
Supply and fixing 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings lock strike plate etc complete all as specified.
Supply and fixing 165 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings lock strike plate etc complete all as specified.
Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge
Materials and labour for 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick Decorative non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and cross tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.
Materials and labour for Kota stone slab 20-25mm thick in floor laid over and including 20mm thick screed bed or bedding layer of cement morter (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed..
Materials and labour for Kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM (1:4) as backing coat and jointed with grey cement slurry mixed with pigment to match the shade of the slab and polishing complete all as specified and directed.
Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection etc. finished the surface of concrete fair and even, complete all as specified and directed.
Materials and Labour 25mm thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregated) as in sub base of floors complete all as specified.
Materials and labour for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed.
Materials and labour for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade over and including 10mm thick backing coat in cement mortar (1:4) , complete all as specified and directed.
Materials and labour for coloured 450x350x7-8 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick backing coat in cement mortar (1:4) , complete all as specified and directed.
Materials and labour for rendering 10mm thick in cement morter (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Materials and labour for rendering 15mm thick in cement morter (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Materials and labour for rendering 20mm thick in two layers of 10 mm thick each in cement morter (1:4) on fair faces of brick work or concrete surfaces,WPC shall be mixed with morter of top layer, finished even and fair, complete all as specified and directed. (Note: WPC shall be measured and paid separately as supply only)
Supply only liquid water Proofing Compound of approved make.
Materials and labour for 2mm thick wall care putty on wall complete all as specified and as directed.
Complete removal of existing treatment on wall surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting on wall complete all as specified and as directed .
Materials and labour for applying three coats of white wash on new wall surface including preparation of surface, complete all as specified and directed.
Materials and labour for applying one coats of white wash on old wall surface including preparation of existing surface, complete all as specified and directed.
Materials and labour for preparation new plaster surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting on wall complete all as specified and as directed
Materials and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed.
Materials and labour for preparing of new untreated wood and wood base surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink prmer complete all as specified and directed.
Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Materials and labour for preparing of new steel and iron surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Supply and fixing 15 mm bore medium grade galvanized steel water tubing with all fittings, fixed to wall/ceiling or laid in floor complete all as specified.
Supply and fixing 20 mm bore medium grade galvanized steel water tubing with all fittings, fixed to wall/ceiling or laid in floor complete all as specified.
Supply and fixing in repairs, 15mm cromium plated Bib taps, cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
Supply and fixing in repair 15 mm bore CP mixer cast copper alloy with capsten head, chromium plated fancy type screwed down high pressure with letter hot and cold with long screwed shank and flynuts screwed for iron pipe, complete all as specified and directed.
Supply and fixing in repair 15 mm bore angular stop valve cast copper alloy fancy type chromium plated with long shank and cup (conceled type) with capstan head wall flange etc screwed down screwed for iron pipe complete all as specified and directed. .
Supply only 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and as directed.
Supply and fixing for 450mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.
Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 110mm bore with access door, complete all as specified and directed.
Supply and fixing PVC (SWR) junction single, (Single T) equal or unequal, 110 mm bore complete all as specified and directed.
Supply and fixing PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 75mm bore with access door, complete all as specified and directed.
Supply and fixing PVC (SWR) junction single, (Single T) equal or unequal, 75 mm bore complete all as specified and directed.
Supply and fixing 32mm bore brass chromium plated traps for wash basins with inlet and outlet screwed for pipe or connection including necessary packing union and cap and fixed complete all as specified and as directed.
Supply and fixing PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
Materials and labour for PCC 1:3:6 type C-2 concrete bed to drain pipes 100mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.
Supply and fixing in repairs brass chromium plated, shower rose, 125mm size complete all as specified and directed.
Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Supply and fixing in repairs, stainless steel sink with drainage board, 1 mm thick for kitchen or laboratoty with plugs, waste pipe, washers, including cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortar to dwarf wall, overall size 915x460mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling and PVC waste pipe complete all as specified and directed.
Supply and fixing in repairs two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed. Make : ESSCO Model No MQT-512ANKN or equivalent model in make Prayag/ Cera/ GEM/Ess Ess/Hindware/ Kohler.
Supply and fixing in repair vitreous chinaware wash down water closet single piece with PP soft close seat cover, Hinges, Dual Flush Cistern fitting, Fixing accessories and accessories Set, of size 360x640x685mm, A. Trap- 110mm complete all as specified and as directed. Make : Jaquar Model No SLS-WHT-6851S110PP or equivalent model in make Cera/ Hindware/ Kohler.
Supply and fixing in repair vitreous chinaware wash hand basin Table Top of size 595x435x185mm complete all as specified and as directed. Make : Jaquar Model No KUS-WHT-35901 or equivalent model in make Cera/ Hindware/ Kohler.
Supply and finxing in repairs 15 mm bore CP two way bib cock with Flange complete all as specified and as directed. Make : Jaquar Model No KUP-35041PM or equivalent model in make Cera/ Hindware/ Kohler.
Supply and fixing in repair 15mm bore Pillar tap single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses complete all as specified and as directed. Make : Jaquar Model No FUS-29005NB or equivalent model in make Cera/ Hindware/ Kohler.
Supply and fixing 15 mm bore CP Sink Cock (swan neck tap) with regular swinging spout (wall mounted model) with wall flange complete all as specified and as directed. Make : Jaquar Model No LYR-38347S or equivalent model in make Cera/ Hindware/ Kohler.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
Materials and labour for concealed point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead, drawing through in and including PVC rigid conduit of size not less than 20mm, with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates. all as specified and directed.One light/fan/call bell point controlled by one switch one way 5 Amps
All as per Item No.107 above but for One 5 pin socket outlet 5/6Amps on independent board
All as per Item No.107 above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm
Materials and labour for concealed point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead, drawing through in and including PVC rigid conduit of size not less than 20mm, with all fittings & accessories for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates. all as specified and directed.One light/fan/call bell point controlled by one switch one way 5 Amps
All as per Item No.110 above but for One 5 pin socket outlet 5/6Amps on independent board
All as per Item No.110 above but for One light point controlled by two nos two way switches.
All as per Item No.110 above but for One 2/3 pin socket outlet 5/6 Amps on the same board with other switches.
All as per Item Sl No -110 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 4.0 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 4.0 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete all as specified and directed.
Supply and fixing modular switch one way 6 Amps 230 volts, 1 module all specified and as directed.
Supply and fixing modular switch two way 6 Amps 230 volts, 1 module all specified and as directed.
Supply and fixing modular switch one way with indicator 16 Amps 230 volts, 1 module all specified and as directed.
Supply and fixing modular bell push one way 6 Amps 230 volts, 1 module all specified and as directed.
Supply and fixing modular socket 2 in 1, 2/3 pin, 6 Amp 2 module all as specified and as directed.
Supply and fixing moduular socket 3 pin 6 Amp-16 Amp 2 module combined shuttered all as specified and directed.
Supply and fixing modular white cover plate with frame 1 module inclusive of inner & outer plate complete all as specified and as directed.
Supply and fixing modular white cover plate with frame 2 module inclusive of inner & outer plate complete all as specified and as directed .
Supply and fixing modular white cover plate with frame 3 module inclusive of inner & outer plate complete all as specified and as directed.
Supply and fixing modular white cover plate with frame 4 module inclusive of inner & outer plate complete all as specified and as directed.
Supply and fixing modular white cover plate with frame 6 module inclusive of inner & outer plate complete all as specified and as directed.
Supply and fixing modular metal flush box 1 module all as directed
Supply and fixing modular metal flush box 2 module all as directed
Supply and fixing modular metal flush box 3 module all as directed
Supply and fixing modular metal flush box 4 module all as directed
Supply and fixing modular metal flush box 6 module all as directed
Supply and fixing Switch piano, flush type, single pole, one way switch 5 Amps.
Supply and fixing Switch socket combination 2 in 1, 5 Amps flush type.
Supply and fixing Switch socket combination multipurpose 15/16 Amps,2/3 pin, flush type.
Supply and fixing Ceiling rose surface PVC 3 terminals 25x50mm all as directed.
Supply and fixing Bell Ding-Dong AC 230 V Single Pole complete all as specified and as directed.
Supply and fixing electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.
Taking down existing unserviceable light fittings and S&F surface mounted square pattern LED luminare 36W,2x2 ft, 3000 K, 230 Volts with PDC Aluminium housing including driver and necessary fixing arrangements complete all as specified and as directed.
Taking down existing unserviceable FTL light fitting and S&F decorative box type fitting with LED tube ,6500K 9/10 watt 2 feet with Aluminium extruded batten luminaire for 230 volt AC complete all as specified and as directed.
Taking down existing unserviceable FTL light fitting and S&F decorative box type fitting with LED tube, 6500K 18/20 watt 4 feet Aluminium extruded batten luminaire for 230 volt AC, complete all as specified and as directed.
Supply and fixing MCB distrubution board TPN 4 way double door, sheet steel, phosphatised powder coated with 200 amps bus bar, neutral link, earth bar and din rail, 415 V complete all as specified and as directed.
Supply and fixing MCB distrubution board TPN 8 way double door, sheet steel, phosphatised, powder coated with 200 amps busbar, neutral link, earth bar and din rail, 415 V complete all as specified and directed.
Supply and fixing MCB distrubution board SPN 12 way double door, sheet steel, phosphatised, powder coated with 200 amps busbar, neutral link, earth bar and din rail 240 V , complete all as specified and directed.
Materials and labour for concealed sub main wiring with two single core stranded copper conductor, FRLS PVC insulated cable 1100V grade, 6 sq mm, drawn through and including suitable size of non-metallic PVC rigid conduit with 6 sqmm copper conductor cable as earth conductor and conduit accessories including connecting up complete all as specified and directed.
Materials and labour for earthing complete with galvanized steel pipe electrode 40mm bore, medium grade, 2.5 meters length, buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground level connected with earthing lead galvanized iron strip of size 25x5 mm connected to galvanized earth pipe by means of bolts, nuts, checknuts and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanized steel tube for watering with one end fix with cast iron funnel and wire-mesh , with protection pipe of 32 mm dia light grade galvanized steel tubing upto 7.5 meters length for drawing earthlead including common salt, charcol , bentonite in alternate layers etc, complete all as shown in EP number 2 of SSR part-1 including testing on completion and including taking down old u/s earthing complete all as specified and as directed.
Supply and laying or fixing or passing through pipe and connecting UG, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core in replacement of existing cable complete all as specified and as directed.
Supply and laying or fixing or passing through pipe and connecting UG, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core in replacement of existing cable complete all as specified and as directed.
Supply and laying 50 mm outside dia double corrugated pipe (DWC) ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed.
Supply and fixing GI pipe 40mm bore light grade for cable protection complete all as specified and as directed.
Materials and labour for boring holes 1mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m complete all as directed. (Note: Connected items like Pipes are measured and paid seperately under relevant items).
The Associated Construction And Co
M/S Bikash Saha
LIBERAL ENGINEER CONSTRUCTION
M S ALOK SAHA
D.D. BROTHERS
ASHOK MUKHERJEE
M/S ASHWIRBAD WOODCRAFT
M S BHARAT CONSTRUCTION CO.
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .