Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹23.1 L
EMD Value
₹46,200
Closing Date
25 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Civil Works for Re-locating the Cellular Shop Inspection and other Allied Works in Engine Division, HAL BC.
8347
TENDER NOTICE/NCP/08/24-25/03
Works
Contract Section Civil-FMD-Bangalore
₹0
₹46,200
25 Jul 2024
24 Jun 2024
24 Jun 2024
25 Jul 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Demolishing brick work manually/ by mechanical means in Cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.
Providing and laying Cement Concrete (1:4:8) at any depth in foundations, in walls or retaining walls, any thickness , size or shape including columns pillars and other similar works curing, de-watering in foundations, etc., complete all as per specifications, drawings and as directed by Engineer-in-Charge.
Providing and laying cement concrete (1:1.5:3) in foundations, retaining walls, return walls, slabs at all height (any thickness) including attached plasters, columns, piers, parapets, coping, bed blocks etc. upto floor five level , excluding the cost centering shuttering & finishing, etc., all complete as directed by Engineer-in-Charge.
Supplying, fabricating and fixing in position MS structural steel sections using ISMB, ISA, Flat, plate, MS square bars / rectangle / round tubes as specified size and thickness for purlins, truss / rafter and columns, cladding support, door frame and fittings, foundation bolts, etc., including necessary cutting, welding, embedding in concrete, masonry, etc., applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing Anodised aluminium work for doors, windows (double & three track), ventilators and partitions Providing and Fixing aluminium work for doors, windows (double & three track), ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass / stainless steel screws, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing Pre- Laminated particel board with Decorative lamination on both sides Doors and partitions providing and fixing 12mm thick prelaminated particle board falt pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminum door, windows shutters and partition frames with C.P. brass / stainless steel screws, etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing 5mm thick Float Glass glazing for doors, windows (double & three track), ventilators and partitions Coated rates will be inclusive of cost of materials consumables with EPDM rubber / neoprene gasket, etc., all complete as directed by Engineer-in-Charge.
False Ceiling Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595X595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4) , fire performance as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid or hot dipped galvanised iron section of 0.40 mm thick on siljouette profile, rotary stiched double webbed white with 6mm reveal profile (White/black), comprising of main-T runners of size 15X42mm of length 3000 mm, cross -T of size 15X42 mm of length 1200 mm and secondary intermediate cross-T of size 14X42 mm of length 600mm to form grid module of size 600 X 600 mm, suspended from ceiling using galvanised mild steel items (galvaizing @ 80 grams pe sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hangar rod upto 1000 mm length and L- shape level adjuster of size 85X25X2 mm. Galvanised iron perimeter wall angle of size 22X19X0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S>S screws. The work shall be carried out as per specifications, drawing, etc., all complete as directed by Engineer-in-Charge.
LED Luminaries Supplying and fixing PHILIPS/CROMPTON GREAVES/HAVELLS MAKE 36 Watts LED flat panel recessed luminaries suitable for (2' x 2' grid false ceiling with efficient heat sink and good quality translucent cover (LEDs shall not be visible) operating on single phase 230 volts 50 HZ AC supply with colour temperature >5700 K and suitable optics for maximizing the spread with in-built driver circuit, including mounting brackets, bolts and nuts for fixing the fitting including necessary scaffolding and minimum 1 years of warranty shall be provided, etc., all complete as directed by Engineer-in-Charge.
Point Wiring Supplying and fixing point wiring of one switch for two fittings using 2.5 sq. mm x 1 run of Red Colour for Phase, 2.5 sq.mm x 1 run Black Colour for Neutral and 1.5 Sq.mm x 1 run of Green Colour for earthing, with PVC Multistrand FRLS Copper wires including casing /conduit pipe, elbows, Junction boxes, bends, Tee's etc, Roma switches, one no. of Roma socket, Roma concealed box, (lighting fixtures, wires, conduits /casing & caping, switches, sockets and all other electrical fittings should be of HAL approved brands) including necessary scaffolding, etc., all complete as directed by Engineer-in-Charge.
Plastering with CM (1:3) Plastering with CM (1:3), 12mm thick for brick/concrete surfaces,flat horizontal surfaces, finished smooth/fair with trowel for interior/exterior faces of walls, trenches, flooring and roof slab including scaffolding, curing, etc., all complete as directed by Engineer-in-Charge.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: two coats on walls / Structural steel, etc., all complete as directed by Engineer-in-Charge.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC content less than 50 grams/ litre of approved brand and manufactue, including applying two coats to achieve even shade and colour to give a uniform finish and including cleaning the dirt and other impurities, scrapping smooth and filling crevices., necessary scaffolding etc. (The consumption of paint should not be less than 10 sqm/ coat/litre), etc., all complete as directed by Engineer-in-Charge.
Disposal Disposal of building rubbish or waste materials by mechanical means, including loading, transporting, unloading to Outside the division at contractor own place as approved by E-I-C , for all leads including all lifts involved, etc., all complete as directed by Engineer-in-Charge.
Dismantling doors, windows and celerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area approximately 3 Sqms, etc., all complete as directed by Engineer-in-Charge.
Double Charged Vitrified Floor Tiles of Kajaria or equivalent Providing and laying vitrified floor tiles of size 600X600 mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3 kg/Sqm including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge.
Steel Reinforcement Supplying, straightening, fabricating and fixing Steel reinforcement of TMT Bars of not less than Fe 500 grade conforming to IS 1786-1985 for all concrete reinforcement members / works including cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above all Level, etc., all complete as directed by Engineer-in-Charge.
Demolishing of Cement Concrete manually/ by mechanical means including disposal of materials within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.
Earthwork excavation Earthwork excavation by mechanical means (hydraulic excavator) / manual means in trenches for foundation, shafts, cesspits, wells, etc., in all soils of depth and width not exceeding 1.50m including dressing of sides and ramming of bottoms,for all lift, including getting out the excavated soil and disposal of surplus exacavated soils as directed,withinn a lead of 50 m, etc., all complete as directed by Engineer-in-Charge.
Refilling Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth , consolidating each deposited layer by ramming and watering,lead up to 50 and for all lift, etc., all complete as directed by Engineer-in-Charge.
Form work: Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams,roof slab; and similar work etc.,Centering and Shuttering including strutting, propping etc, and removal of form work, etc., all complete as directed by Engineer-in-Charge.
Brick Work with common burnt clay F.P.S ( modular) bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coars), etc., all complete as directed by Engineer-in-Charge.
Providing and fixing aluminium handles of 125 mm long , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing aluminium hanging floor door stopper, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws with twin rubber stopper, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Supplying & Fixing Anodised aluminium hinges for shutters of Doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required, etc., all complete as directed by Engineer-in-Charge.
Rupees Nineteen Lakh Fifty Eight Thousand One Hundred Ninety and Twenty Four Paise Only
Approximate Amount Put to Tender
Rupees Three Lakh Fifty Two Thousand Four Hundred Seventy Four and Twenty Four Paise Only
Rupees Twenty Three Lakh Ten Thousand Six Hundred Sixty Four and Forty Eight Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN08.pdf
TENDER_DOCUMENT • 2.59 MB
19ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
19PQ.pdf
TENDER_DOCUMENT • 0.21 MB
19PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
19Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
Amendment.pdf
TENDER_DOCUMENT • 0.16 MB
19Checklist.pdf
TENDER_DOCUMENT • 0.36 MB
19PBF.xlsm
TENDER_DOCUMENT • 0.06 MB
19TB.pdf
TENDER_DOCUMENT • 2.59 MB
19PB.pdf
TENDER_DOCUMENT • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .