SPL REPAIRS TO BLDG NO P-435 (RDR GUN L-70 SEC) OF AD STATIC WKSP UNDER GE(I) GOS

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for 8 to 10 mm thick Light shade vitrified ceramic tiles in floors, tiles size 600 mm x 1200 mm set & jointed in neat cement slurry and pointed in coloured cement to match as in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 8 to 10 mm thick Light shade vitrified ceramic tiles on vertical surface of wall of size 600mm x 1200mm as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for anti non skid ceramic coloured tiles matt finish of design as approved by GE 7 to 8 mm thick (square) area of each tile size 600mm x 600 mm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles size 300mm x 450mm x 7 to 8 mm thick on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.

M&L for Post construction Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.

M&L for Treatment of soil using emulsion for Post construction Anti termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.