Construction of balance area of the first floor of Burnpur Girls High School building, septic tanks and other miscellaneous works

DSR-2023 DESCRIPTION Total amount (Rs.)

GRAND TOTAL AMOUNT (DSR + NDSR) 1,22,35,294.83

Bill of Quantity

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

B 2.00 EARTH WORKS

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as

10 sqm on plan) including getting out and disposal

of excavated earth lead upto 50 m and lift upto 1.5

m, as directed by Engineer-in-charge.

i 2.6.1 All kinds of soils Cum 312.20 177.50 55,415.50

Earth work in excavation by mechanical means

(Hydralic excavator/manual means)over areas

(exceeding 30cm in depth. 1.5m in width as well as

10 sqm on plan) including getting out and disposal

of excavated earth, lead upto 50m and lift upto

1.5m, as directed by Engineer - in Charge

2.2 2.7.3 Hard rock (blasting prohibited) Cum - 1,432.95 -

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

3 2.25 not exceeding 20cm in depth, consolidating each Cum 100.00 196.00 19,600.00

deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

Excavating, supplying and filling of local earth

(including royalty) by

mechanical transport upto a lead of 5km also

4 2.25a including ramming and Cum - 700.50 -

watering of the earth in layers not exceeding 20 cm

in trenches, plinth,

sides of foundation etc. complete

Supplying and filling in plinth with sand under

5 2.27 floors, including watering, ramming, consolidating Cum 20.62 2,123.75 43,791.73

and dressing complete.

Surface dressing of the ground including removing

vegetation and inequalities not exceeding 15 cm

deep and disposal of rubbish, lead up to 50 m and

lift up to 1.5 m.

i 2.28.1 All kinds of soil Sqm 100.00 34.15 3,415.00

Supplying chemical emulsion in sealed containers

including delivery as specified

Chlorpyriphos/ Lindane emulsifiable concentrate of

Diluting and injecting chemical emulsion for POST-

8 2.35 CONSTRUCTIONAL anti-termite treatment - -

(excluding the cost of chemical emulsion) :

Along external wall where the apron is not provided

using chemical emulsion @ 7.5 litres / sqm of the

vertical surface of the substructure to a depth of

i 2.35.1.1 300mm including excavation channel along the wall Metre - 38.90 -

& rodding etc. complete: With Chlorpyriphos/

Lindane E.C. 20% with 1% concentration

Treatment of soil under existing floors using

chemical emulsion @ one litre per hole, 300 mm

a) 2.35.3 apart including drilling 12 mm diameter holes and - -

plugging with cement mortar 1 :2 (1 cement : 2

Coarse sand) to match the existing floor:

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

With Chlorpyriphos/Lindane E.C. 20% with 1%

TOTAL (Carried Over to Summary of Civil

C 4.00 CONCRETE WORKS 0.00

Providing and laying in position cement concrete of

1 4.1 specified grade excluding the cost of centering and -

shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived

a 4.1.6 from natural sources : 6 graded stone aggregate 40 Cum 10.00 7,178.75 71,787.50

mm nominal size derived from natural sources)

Providing and laying damp-proof course 40 mm

thick with cement

concrete 1 :2:4 (1 cement: 2 coarse sand (zone-Ill)

2 4.10 derived from natural Sqm 10.00 410.85 4,108.50

sources: 4 graded stone aggregate 12.5 mm nominal

size derived from

natural sources)

Extra for providing and mixing water proofing

material in cement concrete work in doses by Per 50 kg

weight of cement as per manufacturer's cement

Providing & applying a coat of residual petroleum

bitumen of grade of VG-10 of approved quality

using 1.7kg per square metre on damp proof course

after cleaning the surface with brushes and finally

with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand (zone - III)

: 6 graded stone aggregate 20 mm nominal size)

over 75mm thick bed of dry brick ballast 40 mm

nominal size, well rammed and consolidated and

grouted with fine sand, including necessary

excavation, levelling & dressing & finishing the top

TOTAL (Carried Over to Summary of Civil

D 5.00 REINFORCED CEMENT CONCRETE WORK 0.00

Centering and shuttering including strutting,

propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for

Walls (any thickness) including attached pilasters,

butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and

access platform.

d 5.9.4 Shelves (Cast in situ) Sqm - 927.25 -

Lintels, beams, plinth beams, girders, bressumers

and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts.

Stairs, (excluding landings) except spiral-staircases.

Weather shade, Chajjas, corbels etc., including

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

Steel reinforcement for R.C.C. work including

2 5.22 straightening, cutting, bending, placing in position - -

and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-

Steel reinforcement for R.C.C. work including

3 5.22A straightening, cutting, bending, placing in position - -

and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-

Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and

fine aggregate derived from natural sources,

Portland Pozzolana / Ordinary Portland /Portland

Slag cement, admixtures in recommended

proportions as per IS: 9103 to accelerate / retard

setting of concrete, to improve durability and

workability without impairing strength; including

pumping of concrete to site of laying, curing,

4 5.33.1 carriage for all leads; but excluding the cost of - -

centering, shuttering, finishing and reinforcement

as per direction of the engineer-in-charge; for the

following grades of concrete. Note: Extra cement up

to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the

cement content in design mix is more than 110% of

the specified minimum cement content, the

contractor shall have discretion to either re-design

the mix or bear the cost of extra cement.

a) 5.33.1 All works upto plinth level. - -

Concrete of M25 grade with minimum cement

content of 330 kg /cum

b) 5.33.2 All works above plinth level upto floor V level. - -

Concrete of M25 grade with minimum cement

content of 330 kg /cum

Add for using extra cement in the items of design

5 5.35 mix over and above the specified cement content quintal - -

TOTAL (Carried Over to Summary of Civil

E 6.00 BRICK WORK 0.00

Brick work with common burnt clay F.P.S. (non

1 6.1 modular) bricks of class designation 7.5 in -

foundation and plinth in:

i 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7.00 7,132.25 49,925.75

Brick work with non modular fly ash bricks

conforming to IS:12894,

2 6.34 class designation 10 average compressive strength - -

in super structure

above plinth level up to floor V level in :

i 6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) Cum 124.80 8,752.55 10,92,318.24

Half brick masonry with non modular fly ash bricks

of class designatio 10, conformingio IS :12894, in

super structure above plinth and upto floor V level.

3.1 6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 70.00 1,105.80 77,406.00

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

Extra for providing and placing in position 2 Nos

4 6.15 6mm dia. M.S. bars at every third course of half Sqm 70.00 104.80 7,336.00

TOTAL (Carried Over to Summary of Civil

F 8.00 MARBLE & GRANITE WORK

Providing and fixing 18mm thick gang saw cut (

premoulded and prepolished) machine cut for

kitchen platforms, vanity counters, window sills ,

facias and similar locations of required size of

approved shade, colour and texture laid over 20mm

1 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse -

sand) with joints treated with white cement, mixed

with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edge to

give high gloss finish etc. complete at all levels.

b) 8.2.2 Granite of any colour and shade - -

8.2.2.2 Area of slab over 0.50 sqm Sqm 1.34 5,136.30 6,902.76

Providing and fixing Ist quality ceramic glazed wall

tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-

1 8.31 Charge, in skirting, risers of steps and dados, over Sqm 175.61 1,267.95 2,22,668.13

12 mm thick bed of cement mortar 1:3 (1 cement : 3

coarse sand) and jointing with grey cement slurry

@ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade

TOTAL (Carried Over to Summary of Civil

G 9.00 WOOD, WPC & uPVC WORK

Providing and fixing ISi marked flush door shutters

conforming to IS :

2202 (Part I) non-decorative type, core of block

board construction

1 9.21 with frame of 1st class hard wood and well matched -

commercial 3 ply

veneering with vertical grains or cross bands and

face veneers on both

faces of shutters:

30mm thick including ISi marked Stainless Steel

with necessary screws

Extra for providing vision panel not exceeding 0.1

sqm in all type of flush

2.0 9.24 doors (cost of glass excluded) (overall area of door - -

shutter to be measured):

2.01 9.24.1 Rectangular or square Sqm 8.26 199.15 1,644.90

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

Providing and fixing M.S. grills of required pattern

in frames of windows etc. with M.S. flats, square or

round bars etc. including priming coat with

approved steel primer all complete.Fixed to

openings /wooden frames with rawl plugs screws

Providing and fixing aluminium extruded section

body tubular type universal hydraulic door closer

(having brand logo with ISI, IS : 3564, embossed on

the body, door weight upto 36 kg to 80 kg and door

width from 701 mm to 1000 mm), with double

speed adjustment with necessary accessories

and screws etc. complete.

Providing and fixing aluminium sliding door bolts,

ISI marked anodised anodic coating not less than

32 9.96 grade AC 10 as per IS : 1868), transparent or dyed - -

to required colour or shade, with nuts and screws

etc. complete :

Providing and fixing aluminium tower bolts ISI

marked anodised ( anodic coating not less than

33 9.97 grade AC 10 as per IS: 1868) transparent or dyed to - -

required colour or shade with nuts and screws etc.

Providing and fixing aluminium handles ISI marked

anodised ( anodic coating not less than grade AC 10

34 9.100 as per IS: 1868) transparent or dyed to required - -

colour or shade with nuts and screws etc. complete-

Providing and fixing aluminium hanging floor door

stopper, l5l marked, anodised (anodic coatinS not

less than grade AC 10 as per 15 : 1868) transparent

or dyed to required colour and shade, with

necessary screws etc. complete. Twin rubber

Providing and fixing bright finished brass 100 mm

mortice latch and lock, lSl marked, with six levers

and a pair of anodised (anodic coating not less than

grade Ac 10 as per 15 : 1868) aluminium lever

handles of approved quality with necessary screws

Providing and fixing fly proof stainless steel grade

304 wire gauge, to windows and clerestory

37 9.135 windows using wire gauge with average width of - -

aperture 1.4 mm in both directions with wire of dia.

0.50 mm all complete.

37.2 9.135.2 With 12 mm mild steel U beading Sqm 18.75 1,228.00 23,025.00

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

TOTAL (Carried Over to Summary of Civil

H 10.00 STEEL WORK

Providing and fixing pressed steel door frames

conforming to IS: 4351,

manufactured from commercial mild steel sheet of

1.60 mm thickness,

including hinges, jamb, lock jamb, bead and if

required angle threshold of

mild steel angle of section 50x25 mm, or base ties of

1.60 mm, pressed

mild steel welded or rigidly fixed together by

mechanical means, including

M.S. pressed butt hinges 2.5 mm thick with mortar

guards, lock strike plate and shock absorbers as

specified and applying a coat of approved

steel primer after pre-treatment of the surface as

directed by Engineer in-charge:

Profile B Fixing with adjustable lugs with split end

Providing and fixing 1mm thick M.S. sheet door

with frame of 40x40x6 mm angle iron and 3 mm

M.S. gusset plates at the junctions and corners, all

necessary fittings complete, including applying a

priming coat of approved steel primer. Using M.S.

angels 40x40x6 mm for diagonal braces.

3 10.18 Providing and fixing circular/ Hexagonal cast iron

or M.S. sheet box for ceiling fan clamp, of internal

dia 140 mm, 73 mm height, top lid of 1.5 mm thick

M.S. sheet with its top surface hacked for proper

bonding, top lid shall be screwed into the cast iron/ 24.00 220.65 5,295.60

M.S. sheet box by means of 3.3 mm dia round

headed screws, one lock at the corners. Clamp shall

be made of 12 mm dia M.S. bar bent to shape as per

standard drawing. Each

Steel work welded in built up sections/ framed

work including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer using structural steel etc. as required

In gratings, frames, guard bar, ladder, railings,

brackets, gates and similar works.

Providing and fixing hand rail of approved size by

welding etc. to steel

ladder railing, balcony railing, staircase railing and

similar works, including

applying priming coat of approved steel primer.

TOTAL (Carried Over to Summary of Civil

I 11.00 FLOORING WORK

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

Kota stone slab flooring over 20 mm (average) thick

base laid over and jointed with grey cement slurry

mixed with pigment to match the shade of the slab,

including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average)

thick cement mortar 1:3 (1 cement: 3 coarse sand)

and jointed with grey cement slurry mixed with

pigment to match the shade of the slabs, including

rubbing and polishing complete.

Extra for pre finished nosing in treads of steps of

Kota stone/ sand

11.37 Providing and laying Ceramic glazed floor tiles of

size 300x300 mm

(thickness to be specified by the manufacturer) of

1st quality conforming

to IS : 15622 of approved make in colours such as

White, Ivory, Grey,

Fume Red Brown, laid on 20 mm thick cement

mortar 1 :4 (1 Cement : 4

Coarse sand), Jointing with grey cement slurry @

3.3 kg/sqm including

pointing the joints with white cement and matching

pigment etc., complete. Sqm

TOTAL (Carried Over to Summary of Civil

J 12.00 ROOFING

Providing and laying gola 75x75mm in cement

concrete M15 grade including finishing with cement

mortar 1:3 (1 cement : 3 fine sand) as per standard

design in 75x75 mm deep chase.

TOTAL (Carried Over to Summary of Civil

K 13 FINISHING WORK -

1 13.4 12 mm cement plaster of mix : -

18 mm cement plaster in two coats under layer 12

mm thick cement plaster 1:5 (1 cement : 5 coarse

sand) finished with a top layer 6 mm thick cement

plaster 1:6 (1 cement : 6 fine sand).

3 13.16 6 mm cement plaster of mix : - -

Extra for providing and mixing water proofing per bag of

material in cement plaster work in proportion 50KG

4 13.21 recommended by the manufacturers. Cement 320.41 22.10 7,081.10

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

Distempering with 1st quality acrylic distemper

(ready mixed) having VOC

content less than 50 gram/litre, of approved

manufacturer and of required

shade and colour all complete to achieve even shade

New work (two or more coats) over and including

thinnable priming coat with cement primer having

less than 50 gram/litre

Finishing walls with Premium Acrylic Smooth

6.00 13.47 exterior paint with Silicone additives of required - -

New work (Two or more coats applied @ 1.43

i 13.47.1 over and including priming coat of exterior primer Sqm 366.38 171.10 62,687.67

7 13.50 Applying priming coat : - -

With ready mixed red oxide zinc chromate primer

ii 13.50.3 of approved brand and manufacture on steel Sqm 186.94 67.40 12,599.88

galvanised iron/ steel works

Painting with synthetic enamel paint of approved

8 13.62 brand and manufacture of required colour to give - -

an even shade :

Two or more coats on new work over an under coat

shade with ordinary paint of approved brand and

13.18 Neat Cement punning Sqm - 79.95 -

19.32 Making soak pit 2.5 m diameter 3.0 metre deep

with 45 x 45 cm dry brick honey comb shaft with

bricks and S.W. drain pipe 100 mm diameter, 1.8 m

long complete as per standard design.

19.32.1 With common burnt clay F.P.S. (non modular)

class designation 7.5 Each

19.18 Supplying and fixing C.I. cover without frame for

19.18.3 560 mm diameter C.I. cover (heavy duty) the weight

of the cover to be not less than 108 kg

TOTAL (Carried Over to Summary of Civil

L 21.00 ALUMINIUM WORK

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded

built up standard tubular sections/appropriate Z

sections and other sections of approved make

conforming to IS: 733 and IS : 1285, fixed with rawl

plugs and screws or with fixing clips, or with

expansion hold fasteners including necessary filling

up of gaps at junctions, at top, bottom and sides

1 21.1 with required PVC/neoprene felt etc. Aluminium -

sections shall be smooth, rust free, straight, mitred

and jointed echanically wherever required

including cleat angle, Aluminium snap beading for

glazing / paneling, C.P. brass / stainless steel

screws, all complete as per architectural drawings

and the directions of Engineer-in-charge. Glazing

and paneling to be paid for separately) :

a) 21.1.1 For fixed portion. -

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

For shutters of doors, windows & ventilators

providing and fixing hinges/ pivots and making

b 21.1.2 for fixing of fittings wherever required including the - -

EPDM rubber / neoprene gasket required (Fittings

paid for separately)

Powder coated aluminium (minimum

thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door,

window, ventilator shutters

and partitions etc. with EPDM rubber / neoprene

gasket etc. complete as

per the architectural drawings and the directions of

engineer-in-charge .

(Cost of aluminium snap beading shall be paid in

With float glass panes of 4.0 mm thickness (weight

TOTAL (Carried Over to Summary of Civil

M 22.00 WATER PROOFING 0.00

Grading roof for water proofing treatment with.

1 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 Cum 12.33 8,042.30 99,182.17

graded stone aggregate 20 mm nominal size)

Providing and filling in position bitumen mix filler

of proportion 80 kg. of hot bitumen, 1 kg. of cement

and 0.25 cubic metre of coarse sand for

expansion joints.

Providing and fixing sheet covering over expansion

3 5.29.2 joints with iron screw as per design. Aluminium - -

fluted strips 3.15 mm thick.

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

TOTAL (Carried Over to Summary of Civil

N 14.00 INTERNAL ELECTRICAL WORKS -

1 D.S.R 1.10 Point Wiring in Medium Class PVC Conduit, with

Modular type Switch: Wiring for light point/ fan

point/ exhaust fan point/ call bell point with 1.5

sq.mm FR PVC insulated copper conductor single

core cable in surface/recessed Medium Class PVC

conduit, with modular type switch, modular plate,

suitable size of GI box and earthing the point with

1.5 sq.mm. FR PVC insulated copper conductor

single core cable etc as required. Make FRLS PVC CU

Wire::- Havells, Polycab, Rajnigandha, RR Cable.

(Make of Modular switch Sockets:- Havells

(ATHENA), L&T ENGLAZE), Legrand (LYNCUS) ,

Anchor(WOODS), Schneider-(OPEL)

2 D.S.R 1.11 Wiring for twin control light point with 1.5 sq.mm Point

FR PVC insulated copper conductor single core

cable in surface/recessed Medium Class PVC

conduit, 2 way modular switch, modular plate,

suitable size of GI box earthing the point with 1.5

Sq. mm FR PVC insulated copper conductor single 2.00 1,562.00 3,124.00

core cable etc as required. FRLS CU. Wire Make:-

Havells, Polycab, Rajnigandha, RR Cable. (Make of

Modular switch Sockets:- Havells (ATHENA), L&T

ENGLAZE), Legrand (LYNCUS) , Anchor(WOODS),

Schneider-(OPEL)

3 D.S.R 1.12 Wiring for light/power plug with 2x4 Sq.mm FR Mtr.

PVC insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit along

with 1 No. 4 Sq.mm FR PVC insulated copper 251.00 334.00 83,834.00

conductor single core cable for loop earthing etc. as

required.Make:- Havells, Polycab, Rajnigandha, RR

4 D.S.R 1.14 Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FR PVC insulated

copper condcutor, single core cable in surface/

recessed Medium Class PVC conduit as required.

Make:- Havells, Polycab, Rajnigandha, RR Cable.

5 D.S.R. 1.24 Supplying and fixing of following switch/ socket on

the existing modular plate & switch box including

connections but excluding modular plate etc. as

1.24.4 3 pin 5/6A socket outlet Each 20.00 122.00 2,440.00

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

6 D.S.R. 1.25 Supplying and fixing Stepped type electronic fan Each

regulator on the existing modular plate & switch

box including connections but excluding modular

plate etc. as reqd.

7 D.S.R. 1.26 Supplying and fixing modular blanking plate on Each

the existing modular plate & switch box excluding 20.00 40.00 800.00

modular plate as required.

8 D.S.R. 1.27 Supply and fixing of following size/ modules, GI box

along with modular base & cover plate for modular

switch/ regulator in recess, including connection as

1.27.4 6 module (200mmx 75mm) (for 2 nos. 6A Sockets & Each

2no. 6A Switch)

9 D.S.R. 1.31 Supplying and fixing suitable size GI box with Each

modular plate and cover in front on surface or in

recess including providing and fixing 3 pin 5/6

Amp modular socket outlet and 5/6 A modular type

switch, connections painting etc. as reqd. (for Light

10 D.S.R. 1.32 Supplying and fixing suitable size GI box with Each

modular plate and cover in front on surface or in

recess including providing and fixing 6 pin 5/6 &

15/16 Amp modular socket outlet and 15/16 A

modular type switch, connections painting etc. as

11 D.S.R. 1.33 Supplying & fixing of 3 pin, 5 amp Ceiling rose on Each

the existing junction box/ wooden block including 151.00 87.00 13,137.00

connection as required.

12 D.S.R. 1.34 Supplying and fixing brass batten/angle holder Each

including connection etc. as required.

13 D.S.R. 1.35 Installation, testing and commissioning of wall Each

bracket/Ceiling fittings of all sizes and shapes

containing up to two GLS/CFL/LED lamps per 20.00 119.00 2,380.00

fitting, complete with all accessories including

connections etc. as required.

14 D.S.R. 1.38 Supplying and fixing call bell/buzzer suitable for Each

single phase, 230 V, complete as required.

15 D.S.R. 1.41 Installation, testing and commissioning of pre- Each

wired, fluorescent fitting/ compact fluorescent

fitting of all types, complete with all accessories and

tube/lamp etc. directly on ceiling /wall including 28.00 206.00 5,768.00

connections with 1,5 Sq mm FRLS PVC insulated

copper conductor, single core cable and earthing

etc. as required

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

16 D.S.R. 1.42 Installation, testing and commissioning of pre- Each

wired, fluorescent fitting/ compact fluorescent

fitting of all types, complete with all accessories and

tube/lamp etc. including supplying and fixing ball

and socket arrangement , 2 nos. down rodsof 20mm

diax 1.6 mm thick steel conduitup to 30 CM length,

paniting and wiring the down rod and connections

with 1.5 Sq MM FRLS PVC insulated copper

conductor, single core cable and earthing etc. as

17 D.S.R. 1.44 Installation, testing and commissioning of Ceiling Each

Fans, including wiring the down rods of standard

length (up to 30cm) with 1.5 Sq mm FRLS PVC 45.00 213.00 9,585.00

insulated copper conductor, single core cable and

earthing etc. as required.

18 D.S.R. 1.50 Installation of exhaust fan in the existing opening,

including making good the damage, connection, - -

testing, commissioning etc. as required.

19 D.S.R 2.2 Providing and fixing following rating and breaking

capacity and pole MCCB with thermomagnetic

release and terminal spreaders in existing cubicle

panel board including drilling holes in cubicle panel, - -

making connection, etc. as required. Make:- L&T D-

Sine/ Legrand DPX³ / Schneider-NSX / Siemens -

20 D.S.R 2.4 Supplying and fixing following way, horizontal

type thee pole & neutral, sheet steel, MCCB

distribution board, 415V, on surface/ recces ,

complete with tinned copper bus bar, neutral bar,

earth bar, din bar interconnections, powder painted - -

including earthing etc. as required (But without

MCCB/RCCB/Isolator) Make:-SIEMENS-Bitaguard,

LEGRAND-Ekinox³-, SCHNEIDER-ACTI-9, L&T-AU

2.4.3 8 way (4+24) Double door Each - 5,967.00 -

21 D.S.R 2.5 Supplying and fixing of following ways surface/

recess mounting, vartical type, 415 V, TPN

MCCB/MCB distribution board of sheet steel, dust

protected, duly powder painted, inclusive of 200 A

tinned copper bus bar, common neutral link, earth

bar, din bar for mounting MCCBs( but without

MCCBs and incomer) as required. (Note : Vertical

type MCCB TPDB is normally used where 3 phase

outlets are required.) Make:-SIEMENS-Bitaguard,

LEGRAND-Ekinox³-, SCHNEIDER-ACTI-9, L&T-AU

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

22 D.S.R 2.10 Supplying & fixing 5 amps to 32 amps rating

240/415 volts 10 kA, C curve Miniature Circuit

Breaker suitable for inductive loads of following

poles in the existing MCB DB complete with

connections, testing and commissioning etc. as

required. (Make:-LEGRAND- DX³/SCHNEIDER-

ACTI-9/SIEMENS- BETA GUARD/ L&T- AU

2.10.5 Triple Pole and neutral Each 2.00 1,228.00 2,456.00

23 D.S.R 2.11 Supplying and fixing single pole blanking plate in Each

the existing MCB DB complete etc. as required.

24 D.S.R 2.14 Supplying & fixing following rating double pole

(Single Phase & Neutral) 240 V, Resudual Curren

Circuit Breaker (RCCB) , having a sensitivity current

uo to 300mA in the existing MCB DB complete with

connections, testing and commissioning etc. as

required. Make:-LEGRAND- DX³/SCHNEIDER- ACTI-

9/SIEMENS- BETA GUARD/ L&T- AU VERSION.

25 D.S.R 2.18 Supplying and fixing of 20A 240V, SPN Industrial Each

Type soclket out let with 2 pole and earth, metal

cenclosed plug top along with 20A "C" Series SP

MCB, in sheet steel enclosure, on surface or in

recess, with chained metal cover for the socket out

let and complete with connections, testing and

commissioning etc. as required. Make:- Legrand,

L&T, Siemens, Schneider.

26 D.S.R 2.21 Providing & fixing of M.V. danger notice plate of 200 Each

mm x 150 mm, made of mild steel, at least 2 mm

thick, and vitreous enamelled white on both sides, 5.00 269.00 1,345.00

and with inscription in single red colour on front

side as required.

27 D.S.R. EARTHING SYSTEM - -

i) 5.2 Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm Each

dia including accessories, and providing massonry

enclosure with cover plate having locking 2.00 6,855.00 13,710.00

arragement and watering pipe etc. with

charcoal/cock and salt as required.

ii) D.S.R. 5.9 Supplying and laying 25 mm X 5 mm GI strip at Mtr

0.50 meter below ground/surface as strip earth

electrode, including connection/ terminating with

nut, bolt, spring, washer etc. as required (Jointing

shall be done by overlapping and with 2 sets of G.I.

nut bolt & spring washer spaced at 50 mm)

28 LIGHTNING CONDUCTOR - -

i) D.S.R. 6.2 Providing and fixing of Lightning Conductor finial, Each

made of 25 mm dia 300mm ling, copper tube,

having single prong at top, with 85 mm dia 3 mm 8.00 518.00 4,144.00

thick copper base plate including holes etc.

complete as required.

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

ii) D.S.R. 6.7 Providing and fixing G.I. Tape 20mmx3mm thick on Mtr

parapat or surface of the wall for lightning

conductor complete as required. (for Horizontal

iii) D.S.R. 6.8 Providing and fixing G.I. Tape 20mmx3mm thick on Mtr

parapat or surface of the wall for lightning

conductor complete as required. (for Vertical Run).

iv) D.S.R. 5.2 Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm Each

dia including accessories, and providing massonry

enclosure with cover plate having locking 8.00 6,855.00 54,840.00

arragement and watering pipe etc. with

charcoal/cock and salt as required.

v) D.S.R. 5.9 Supplying and laying 25 mm X 5 mm GI strip at Mtrs.

0.50 meter below ground/surface as strip earth

electrode, including connection/ terminating with

nut, bolt, spring, washer etc. as required (Jointing

shall be done by overlapping and with 2 sets of G.I.

nut bolt & spring washer spaced at 50 mm)

29 D.S.R. 7.1 Laying of I no. PVC insulated and and PVC sheathed

/XLPE power cable of 1.1 KV grade of following size

direct in ground including excavation snad - -

cushioning, protective covering and refilling the

trench etc as required.

7.1.2 Above 35 Sq. mm. and up to 95 Sq. mm Mtr 70.00 405.00 28,350.00

30 DSR 9.1 1.1 KV Cable End Termination:-Supplying and

making indoor cable end termination with brass

double compression gland and aluminium lugs for - -

following size of PVC insulated XLPE Al. Ar. Cable of

1.1 KV grade as required.

31 DSR 14.13 Providing, laying and fixing following dia G.I. pipe

(medium class) in ground complete with G.I. fittings

including trenching (75 cm deep)and re-filling etc.

1 MR LED LUMINAIRES LIGHTS

Note:- All LED Light fittings LM 79 and LM 80

reports need to be submitted with all accessories.

Samples of alltype LED light fixtures are to be

submitted to the Engineering Incharge and each

LED Light should have 100lm/W for the approval

prior to procurement of light fixtures. Make Havels,

Bajaj, Philips Jaquar. Make 0f LED

Chip_Philips/Osram/Cree/Nichia.

i) Supply of 9W/10W LED Bulb (Luminous Flux- Each

600lm, CCT-6500K (Cool W 9/10 watt LED Bulb,

B22, 6500 Khite), CRI-80, Rated Voltage- 220V/

240V. Beam Angle- 120 degree. 3,500.00

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

ii) Supply of surface mounted 10 watt led tube light Each

fitting, 2 feet, Poly- carbonate body 6500K, 100 10.00 629.00

lumen / watt. 6,290.00

iii) Supply of 20 watt LED tube light fitting, 4 feet, IP20, Each

6500K, Polycarbonate Body, 100 Lumen / Watt. 20.00 757.00

iv) Supply of 40 watt, 4 feet, IP20 Surface / Suspension Each

mounting, Extruded Aluminum housing with Lumen 70.00 2,446.00

output of 4800. THD. 1,71,220.00

v) Supply of 15 watt, IP20 led surface mounted down Each

light with 100 lumen / watt, 5700K, round with 10.00 2,388.00

Aluminum housing. 23,880.00

vi) Supply of Surface mounted 10 watt, IP65 led Each

Bulkhead, Polycarbonate body, 6500K, 19,920.00

vii) Supply, fitting, fixing and testing of building outer Each

lighting luminaire (Street Light) aerodynamically

shaped single piece pressure die-cast Aluminum

luminaire with high power LEDs as light source and

electronic driver (IP66), along with 45W LED Lamp

as Energy saving as per drawing prescribed

reflector and heat resistant toughened flat glass

cover, with 5ft long 40mm dia G.I. pipe with 3 Nos.

of iron clamps , anchor nut bolts with double

washers as per direction of E/I or consultant as per

drawing prescribed reflector and heat resistant

toughened flat glass cover. 5,446.00

2 MR FANS & EXHAUST FANS - -

All Ceiling Fans shall be of I.S.I. Brand and of

minimum 2 years of Warranty and CFM should not

be less than 300. Samples of all Fans are to be

submitted to the Engineer-in- charge for the

approval prior to procurement of Fans. Make:-

Usha, Bajaj, Havells, Crompton. -

i) Supply of regular /standard model A.C ceilling fan Each

of 1200 mm sweep with double ball bearing, down

road, 2 nos. canopies including wiring the down

rods of standard length (upto 30 cm ) with 1.5 sq.

mm FR PVC insulated copper conductor etc.as

required. 79,440.00

ii) Supply of 230V AC Exhaust Fan (230mm- 1400 Each

RPM), double ball bearing (Metal Body- Light Duty) 12.00 1,704.00

exhaust fan as required. 20,448.00

3 MR Supply, fitting fixing and testing of 63A TP/10kA, C Each

Series MCB .(Make:-MCB-LEGRAND-

DX³/SCHNEIDER- ACTI-9/SIEMENS- BETA GUARD/

L&T- AU VERSION.) 8,880.00

4 MR Supply, fitting fixing and testing of 63A FP/10kA, C Each

Series MCB .(Make:-MCB-LEGRAND-

DX³/SCHNEIDER- ACTI-9/SIEMENS- BETA GUARD/

L&T- AU VERSION.) 5,490.00

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

5 MR Supply, fitting, fixing and commissioning of Three

Phase 4 Wire Smart kWh Meter/50 HZ/ 20A-100A

(IS:- 16444) LCD display, tamper proof type Energy

Meter (Note:- Location of all Smart kWh Meter

shall be out side on wall . Make:- kWh Smart Meter-

L&T/Conzerv /SECURE. Set -

6 MR Supply of following size of 1.1KV XLPE / PVC

Insulated / PVC sheathed (Heavy Duty) armoured

electric cable with aluminium conductor as per IS

7098 (Part-1) 1988 with upto date Amendments.

Make:- As per approved Make List (Make:- Havell’s,

Polycab, RPG, RR Kabel, KEI) -

Supply of 3.5 Core 95 Sq. mm. XLPE PVC Al. / Ar.

Cable 1.1 KV mtr 71,880.00

TOTAL (Carried Over to Summary of Civil

O 15.00 PLUMBING WORKS

1 17.1 Providing and fixing water closet squatting pan

(Indian type W.C. pan ) with 100 mm sand cast

Iron P or S trap, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with

manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making

good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of

size 580x440 mm with integral type foot rests Each

2 17.2 Providing and fixing white vitreous china

pedestal type water closet (European type W.C.

pan) with seat and lid, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever), - -

conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making

good the walls and floors wherever required.

17.2.1 W.C. pan with ISI marked white solid plastic seat

3 17.23 Providing and fixing white vitreous china flat

back or wall corner type lipped front urinal basin

of 430x260x350 mm or 340x410x265 mm sizes

respectively. Each

4 17.75 Providing and fixing PTMT 15 mm Urinal

spreader size 95x69x100 mm with 1/2" BSP

thread and shapes, weighing not less than 60

5 17.76 Providing and fixing PTMT urinal cock of

approved quality and colour.

17.76.1 15 mm nominal bore, 80 mm long, 42 mm high

and 30mm wide with BSP female threads 3.00 175.40 527.00

weighing not less than 48 gms Each

6 17.28 Providing and fixing P.V.C. waste pipe for urinal

including P.V.C. waste fittings complete.

17.28.2 Flexible pipe - -

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

7 8.10 Providing and fixing stone slab with table rubbed,

edges rounded and polished, of size 75x50 cm

deep and 1.8 cm thick, fixed in urinal partitions

by cutting a chase of appropriate width with

chase cutter and embedding the stone in the

chase with epoxy grout or with cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of

Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm 2.00 4,051.85 8,104.00

8 18.21.2.1 Providing and fixing uplasticised PVC connection

pipe with brass unions : 45 cm length , 15 mm

9 17.7 Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32 mm C.P.

brass waste of standard pattern, including - -

painting of fittings and brackets, cutting and

making good the walls wherever require :

17.7.4 White Vitreous China Flat back wash basin size

550x400 mm with single 15 mm C.P. brass pillar 6.00 1,879.20 11,276.00

10 17.11 Providing and fixing white vitreous china

laboratory sink with C.I. brackets, C.P. brass chain

with rubber plug, 40 mm C.P brass waste and

40mm C.P. brass trap with necessary C.P. brass - -

unions complete, including painting of fittings

and brackets, cutting and making good the wall

wherever required :

11 17.28 Providing and fixing P.V.C. waste pipe for sink

including P.V.C. waste fittings complete.

17.28.2 Flexible pipe - -

12 17.31 Providing and fixing 600x450 mm beveled edge

mirror of superior glass (of approved quality)

complete with 6 mm thick hard board ground 6.00 1,607.95 9,648.00

fixed to wooden cleats with C.P. brass screws and

washers complete. Each

13 17.28 Providing and fixing P.V.C. waste pipe for sink or

wash basin including P.V.C. waste fittings - -

17.28.1 Flexible pipe - -

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

14 17.73 Providing and fixing PTMT towel rail complete

with brackets fixed to wooden cleats with CP

brass screws with concealed fittings arrangement

of approved quality and colour.

17.73.1 450 mm long towel rail with total length of 495

mm, 78 mm wide and effective height of 88 mm, 1.00 673.40 674.00

weighing not less than 170 gms Each

15 MR Providing and fixing Coat Hook of approved

quality. 1.00 926.00

16 17.16a Providing and fixing 8mm dia C.P./S.S. Jet with

flexible tube upto 1 meter long with S.S.

Triangular plate to european type W.C. Of 3.00 349.15 1,048.00

approved quality and make as approved by

engineer in charge. Each

17 18.65 Providing and fixing PTMT soap Dish Holder

having length of 138mm, breadth 102mm, height

of 75mm with concealed fitting arrangements,

weighing not less than 106 gms. Each

18 18.22 Providing and fixing C.P. brass shower rose with

15 or 20 mm inlet :

18.22.1 100 mm diameter Each - 193.95 -

19 18.16 Providing and fixing brass stop cock of approved

18.16.1 15 mm nominal bore Each - 353.25 -

20 18.51 Providing and fixing C.P. brass long body bib cock

of approved quality conforming to IS standards

and weighing not less than 690 gms.

20.01 18.51.1 15 mm nominal bore

21 18.53.1 Providing and fixing C.P. brass angle valve for

basin mixer and geyser points of approved

quality conforming to IS:8931 15mm nominal 16.00 574.30 9,189.00

B) WATER SUPPLY - -

1 18.8 Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and

making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and

making good the walls etc.

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

2 18.7 Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing

the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge.

Internal work - Exposed on wall - -

2.01 18.7.1 15mm nominal bore Mtr. - 286.80 -

0.01 18.7.3 25mm nominal bore Mtr. - 401.55 -

3 MR Providing and fixing brass/bronze lever operated

ball valve of full flow with stainless steel ball

(AISI 304 and spindle AISI 410) with setting and - -

gland of superior quality having minimum

working pressure of 16 kg/cm2.

3.01 15 mm nominal bore Each 1.00 927.00 927.00

3.02 25 mm nominal bore Each 2.00 1,662.00 3,324.00

3.03 32 mm nominal bore Each 1.00 2,570.00 2,570.00

4 18.62 Providing and fixing PTMT Ball cock of approved

quality, colour and make complete with Epoxy

coated aluminium rod with L.P./ H.P.H.D. plastic

4.01 18.62.3 25 mm nominal bore, 152mm long, weighing not

less than 440 gms

5 18.18 Providing and fixing ball valve (brass) of

approved quality, High or low pressure, with - -

plastic floats complete

6 18.32 Constructing masonry Chamber 30x30x50 cm

inside, in brick work in cement mortar 1:4 (1

cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with

hinged cover fixed in cement concrete slab 1:2:4

mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), i/c necessary

excavation, foundation concrete 1:5:10 ( 1

cement : 5 fine sand : 10 graded stone aggregate

40mm nominal size ) and inside plastering with

cement mortar 1:3 (1 cement : 3 coarse sand)

12mm thick, finished with a floating coat of neat

cement complete as per standard design :

6.01 18.32.1 With common burnt clay F.P.S.(non modular)

bricks of class designation 7.5 - 1,992.60 -

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

7 18.48 Providing and placing on terrace (at all floor

levels) polyethylene water storage tank, ISI :

12701 marked, with cover and suitable locking

arrangement and making necessary holes for

inlet, outlet and overflow pipes but without

fittings and the base support for tank. Circular

C) DRAINAGE - -

Providing and fixing soil, waste and vent SWR

4.01 MR Supply fixing and testing UPVC SWR pipe

confirming to IS:13592 for waste connection

from wash basin and pantry sink to floor trap or

thermosyphonage pipe with solvent cement

joints including all the fittings laid above the fall

ceilling connected in wall etc the shall include

wall chiseling making good the same in cement

mortar etc complete include with all necessary

support like GI hangers support GI grip and bolts

GI clamp etc in fall ceilling area as well as

supplying and fixing GI slotted angle iron bracket

hangers supports with necessary drilling holes to

suit the insertion of pipe clamps deburring brick

work concrete supports etc as per detailed

drawing for supporting soil waste and rain water

pipes and water supply pipes in shaft with

suitable GI clamps GI bolts anchor nuts and

washers fixed on shaft walls, outer walls etc.

4.02 MR Providing and fixing M.S. holder bat clamps of

approved design including cost of cutting holes

and making good the walls etc.

a) MR 110mm dia pipe Each 40.00 404.25 16170

b) MR 75mm dia pipe Each 20.00 352.00 7040

4.03 Providing fixing and testing UPVC SWR plain ring

type 90 Deg Bend with door IS:14735

4.04 Providing fixing and testing UPVC SWR plain ring

type 45 Deg Bend IS:14735

4.05 Providing fixing and testing UPVC SWR plain

Single Y Branch with Door type fitting IS:14735

4.06 Providing fixing and testing UPVC SWR plain

Reducing Single Y Branch Door type fitting

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

4.07 Providing fixing and testing UPVC SWR plain Tee

Branch with Door type fitting IS:14735

4.08 Providing and fixing and testing UPVC single floor

trap with all necessary UPVC pipes connection

extension pipe and reducing tee for water pipe

connections from toilet and wash area.

4.09 Providing and fixing 75 mm dia, 3 mm thick

Stainless steel grating with frame for floor traps

or drains of required pattern including cutting

and making good the floors complete.

4.10 MR Providing and fixing cast brass Floor Clean Out plug

100mm with suitable insert keys for opening, male

threaded joint with G.I. socket lead caulked to soil

pipe / waste pipe of C.I. and C.I.(LA) pipe as

required complete as per instruction of the

Engineer in charge.

D) RAIN WATER WORK - -

#REF! 12.41 Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring - -

conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes.

#REF! 12.42 Providing and fixing on wall face unplasticised -

PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A including

jointing with seal ring conforming to IS : 5382

leaving 10 mm gap for thermal expansion.

#REF! 12.42.2 Single Push fit coupler - -

#REF! 12.42.3 Single Tee with door - -

#REF! 12.42.6 Shoe (Plain) - -

#REF! 12.44 Providing and fixing to the inlet mouth of rain

water pipe cast iron grating 15 cm diameter and 4.00 54.70 219.00

weighing not less than 440 grams. Each

Digitally signed by SILKI

Total DSR-2023

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. NDSR Amount

#REF! 12.43 Providing and fixing unplasticised -PVC pipe clips

of approved design to unplasticised - PVC rain

water pipes by means of 50x50x50 mm hard

wood plugs, screwed with M.S. screws of required

length, including cutting brick work and fixing in

cement mortar 1:4 (1 cement : 4 coarse sand) and

making good the wall etc. complete.

#REF! 12.22 Making khurras 45x45 cm with average minimum

thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate

of 20 mm nominal size) over P.V.C. sheet 1 m x1

m x 400 micron, finished with 12 mm cement 3.00 298.25 895.00

plaster 1:3 (1 cement : 3 coarse sand) and a coat

of neat cement, rounding the edges and making

and finishing the outlet complete.

TOTAL (Carried Over to Summary of Civil

Digitally signed by SILKI