Construction of Drain and Culvert at Hameempuram 7 th street in ward no.50

Earthwork excavation and depositing on bank with an initial lead and lift in sand slit or other loose soil wet sand or slit not under water light block cotton soil and nordinary soil including excavated earth including all cost and conveyance etc., complete with as per the standard specification.

Plain cement concrete of mix 1:4:8 using 40mm ISS metal from the approved quarry including cost and convenyance of the materials to site and all the labour charges etc., complete as per the standard specification.

Without Props

With Props

Plain Cement Concrete 1:3:6 (One part of Cement, Three part of Crushed Sand (M - Sand), Six part of coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification.

Supplying, fabricating and placing in position of MS or RTS rods for cutting, bending, straightening of rods and tying the grills for reinforcement with necessary binding wire including all cost and conveyance of materials to site with all labour cosy etc., complete as per standard specification.

Providing and laying in position standardized concrete Mix M-20 Grade (design mix) in accordance with IS 456-2000 using 20mm and below graded hard broken granite stone jelly for all RCC items of works with minimum cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (3.3cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670kg of Q.dust, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc., and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards.

Plastering with cement mortar 1:4 (One part of Cement and Four part of Plastering Sand (P - Sand) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc., complete complying with standard specifications (S.I.309)

Plain cement concrete of mix 1:2:4 using 20mm ISS metal from the approved quarry including cost and conveyance of the materials to site and all the labour charges etc., complete as per the standard specification