CA No CWE/FZR- /2020-21 Special repair to bldg No E-47 (OTM) at Inf Div Pro unit under GE (East) Ferozepur Cantt

Amount

M&L for Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, complete all as specified.

M&L for Non skid Ceramic coloured ( colour and shade as approved) tiles,any shape, 7mm to 8 mm thick area of each tile exc. 0.11 sqm and not exc 0.18 sqm as in flooring set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6), complete all as specified.

All as per item No 2 here-in-before but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified.

M&L for Non skid Ceramic coloured (colour and shade as approved) tiles,any shape, 7mm to 8 mm thick area of each tile exc 0.06 sqm and not exc 0.11 sqm as in flooring, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6), complete all as specified.

M&L for Glazed ceramic tiles, coloured ( colour & shade as approved), of size 300x200x7 mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over & including 10 mm thick rendering in cement mortar (1:4), complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floor,aprons,etc laid in bedded and pointed in any surfaces complete all as specified and directed.

M&L for granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over & including 15 mm thick screed in cement mortar (1:4), complete all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

M&L for Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in 50mm thick plinth protection, surfaces finished even and fair without using extra cement including provision of construction joints complete all as directed by Engr-in-Charge and as specified.

Dismantling of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item 12 hereinbefore but using old bricks retrieved from demolition under item 11 hereinbefore including cleaning and removal of mortar from old bricks complete all as specified.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

M&L for Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L for Rendering 10 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L Rendering 5 mm thick in cement mortar (1:3) on ceiling concrete surfaces finished even and smooth without using extra cement, complete all as specified.

M&L Preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer, complete all as specified.

M&L Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified.

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M&L Cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in filling of steel chowkhats and bed blocks of hold fast including necessary formwork, complete all as specified.

M&L for Taking down wooden/steel chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,making good jambs with plaster in CM(1:4) to match with existing finish and removing from site, complete all as specified.

All as per item No 22 herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each.

S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 105 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.

S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 125 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.

M&L Cement concrete (1:3:6) type C-1 (20 mm graded stone aggregate) as in filling of steel chowkhats and bed blocks of hold fast including necessary formwork complete all as specified.

S&F Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 9 mm thick B.W.P. commercial ply or 12mm thick BWR grade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24(a) of MES Schedule Part-I section-8 complete all as specified.

S&F Factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass/gauge etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F Factory made solid PVC door frame (having density not less than 600 kg/cum) of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube, complete all as specified in MES Schedule Part-I (2009),including making good jambs in CM(1:4) with finishes to match with existing, complete all as per specification & shown in drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (having density not less than 600 kg/cum) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site, complete all as per specification in MES Schedule Part-I (2009) & shown in drawing.

M&L for refixing of old PVC frames n.exc 1.5 Sqm each in same opening, complete all as specified.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, complete all as specified.

M&L Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

S&F anodized aluminium alloy barrel tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F Aluminium anodized, (cast type) handle,150 mm long and fixed with steel screws complete all as specified.

S&F extruded aluminium alloy butt hinge, 100mm long, with galvanized mild steel hinges pin anodised type B-21, complete all as specified.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

S&F Mild steel decorative curtain rod 20mm dia PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

Taking up or down existing steel water tubing,15 mm bore alongwith connections fixed/laid in any situation, complete all as specified

Taking up or down existing steel water tubing,20 mm bore alongwith connections fixed/laid in any situation, complete all as specified

S&F Galvanised steel water tubing, 15 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

S&F Galvanised steel water tubing, 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

Re-fixing only, steel water tubing, 15mm bore and connections in new or old position using new fittings fixing to wall/ceiling or laid in floors complete all as specified.

Re-fixing only, steel water tubing, 20mm bore and connections in new or old position using new fittings fixing to wall/ceiling or laid in floors, complete all as specified.

S&F 300 mm Mild steel helical door spring including roller and roller plate, as in repair, complete all as specified.

S&F in repair Towel rail, 19mm dia brass chromium plated, 600mm long with brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs (minimum Wt 190gms), complete all as specified.

S&F in repair PVC syphonic action type low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, 32 mm PVC flush pipe and necessary fixing arrangements and connecting to water pipe, complete all as specified .

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

Disconnecting existing tanks, any capacity rotational moulded setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. Measured separately), complete all as specified.

S&F in repair 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule, complete all as specified.

S&F in repair 15mm stop cock cast copper alloy, chromium plated with crutch or butterfly handle ,screwed down screwed for iron pipe or for brass ferrule, complete all as specified.

S&F in repair Brass chromium plated shower roses 125mm size with or without swivel joints,with shower arm 15 mm dia,195 mm long with bend of 45 degree with flange of CP brass, including fixing to steel pipe or union, complete all as specified.

S&F in repair 15mm stop valve cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with long shank and cup (concealed type), complete all as specified.

S&F in repair 15 mm bore bib tap of, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle, complete all as specified.

S&F in repair Vitreous china white squatting pan orissa pattern of size 580mm x 440mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover, Jet spray and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S & F in repair for vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including. providing and fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F in repairs, wash basin counter type of size 560mmx410mm viterous China (white) including all fitting such as waste pipe, PVC connection, waste coupling etc & making good disturbed surfaces to match with the existing, complete all as specified.

S&F in repair 15mm bore pillar tap, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe, complete all as specified.

Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

S&F, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors, complete all as specified.

S&F in repair 75mm cast iron floor trap, plain with grating including jointing with solvent cement, complete all as specified.

S&F, as in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and incld stack clamps with nuts & bolts, complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) bends/shoe and provided with access door any radius fixed to walls including distance pieces and stack clamps, including making good around complete all as specified.

S&F 50mm bore high density polyethylene (HDPE) pipes of pressure rating 6 kg/sq. cm, complete all as specified.

M&L Preparation of old decorated plastered or unplastered surface of walls by brooming down with steel wire brush, scraping down smoke soot, mould, moss and efflorescent salts and trading oil, greasy spots and applying one coat of oil bound distemper, complete all as specified and as directed.

M&L Preparation of old plastered surfaces of walls and applying one coat of cement base paint, including cornices, pillasters etc, complete all as specified and as directed.

M&L Preparation of old decorated plastered or unplastered and applying one coat of white wash on ceiling including cornices, pillasters etc complete all as specified and as directed.

M&L Cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in haunching, roof kerbs, benching, coping etc including form work, weathering, slightly rounded or chamfered complete all as specified.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation, complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for screed bedding 10 mm in cement mortar (1:4) concrete surfaces of roof, finished even and fair without using extra cement etc, complete all as specified.

S&F 150 micron thick (transparent) polythene film with 150mm end & side laps,laid over a coat of bitumen primer 0.50 kg per sqm, bonded with a coat of 80/100 industrial bitumen @ 1.20 Kg/sqm and laid on roof, complete all as specified.

M&L 80 mm thick average, consolidated thickness, mud phuska on flat roofs, including 25 mm thick mud plaster, complete all as specified.

M&L 40 mm thick brick tiles laid over a layer of 25mm thick mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, complete all as specified.

All as per item No 83 herein before but using old brick tiles retrieved from dismantling (Item No 78 hereinbefore) including cleaning and removal of mortar from tiles, complete all as specified.

M&L for Flush pointing to brick work laid flat or brick tile in roof/paving in cement mortar (1:4) including racking out joints brick,complete all as specified.

S&F anodised aluminium frame of any thickness for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F hydraulically extruded aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified.

S&F 5 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares exc 0.50 Sqm complete all as specified.

Taking down carefully existing copper/alumimium point wiring for light/fan/socket out let points complete with fitting and fixtures, battens, wire, and ceiling fan etc and making good the disturbed surfaces of walls and ceilings, complete all as specified.

Taking down unserviceable main switches and distribution boards single phase complete all as specified.

Taking down carefully old unserviceable sub main wiring and making good disturbed sufaces and matching with existing complete all as directed and specified.

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia )duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for following:- (a) One light/fan/bell/exhaust point controlled by one single pole one way switch.

(c) One 3 pin 5 Amp socket outlet point controlled by one switch on independent board.

(c) One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item 93 above, but one switch socket outlet multi purpose, 3 pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified.

All as per item 93 above, but one switch socket outlet multi purpose, 3 pin, 15 Amps, point to be controlled by one switch and wiring with 4 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 4 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified.

S&F Switch, piano, flush type, single pole one way, 5 Amps duly ISI marked,complete all as specified.

S&F Switch piano flush button type 15 Amps, single pole, one way, complete all as specified.

S&F Socket outlet, 3 in 1, 5 pin, 5 Amp, piano flush type,ISI marked, complete all as specified.

S&F Socket outlet 2 in 1, 6 pin, 5 Amp and 15 Amp, piano flush type, complete all as specified.

S&F Ceiling rose, surface type, backelite 65mmx50mm, 3 terminals complete all as specified.

S&F Lamp holder, insulated body, threaded dome pattern, suitable for bracket fittings including LED bulb of 10 watts, complete all as specified.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all as specified.

S&F in repair of regular batten for LED 18W indoor decorative batten with extruded aluminium housing & Opal diffuser IP-20 fixed to walls/ ceiling etc complete including LED tube 18 W, complete all as specified.

S&F as in repairs bldg security light LED fittings 25 watts complete with all accessories like lamp, bracket of not exc 1.2 metre 40 mm GI light grade tubing & bent at middle to shape by 120 degree from vertical du;ly painted with two coats of aluminium paint with mild steel clamps, nuts & bolts,sleek pressure die cast aluminium housing heat resistant glass IP-65 protection, cable insulated and PVC sheathed copper conductor multi stranded and connecting to conductor and testing, complete all as specified.

S&F as in repair sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as specified.

S&F as in repair Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, VTPN DB with 200 Amps rated bus bar, 4 way, FP-42 protection surface mounting, 415 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made,including thermal based release adjustable type 4 pole, 63 Amps, 50 Hz, 415 volts with rupturing capacity 16 KA and making good disturbed surfaces with matching colour, complete all as specified.

S&F as in repair Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, FP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCCBs duly cocealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified.

S&F in repairs MCB, SPN, 63 Amps, 240 volts duly ISI marked, complete all as specified.

S&F in repairs MCB, single pole, 240 Volt, 16 to 32 Amps, 10 KA complete all as specified.

S&F as in repairs for sub main wiring to single core PVC insulated unsheathed copper cable FRLS 2x6 Sqmm single core 650/1100 V, stranded conductor and including drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:- Two runs of cable, 1 run of earth wire & one run of PVC conduit shall be measured as one length.

S&F as in repair heavy duty, 900 RPM Exhaust fan AC single phase 230/240 Volts of 300mm sweep with louver plastic body, including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection, complete all as specified.

Cutting hole making good, the disturbed surface, grouting nuts & bolts for fixing of exhaust fans, complete all as specified.

Fixing or hanging only ceiling fan height 3 metres to 5 metres of bldg including three core FR PVC insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/Green is from earthing sheath colour is Black of cable size 23/0.0076, complete all as specified. Note: ceiling fan obtained from taking down in item Sr No 90 above.

M& L Earthing complete, all as shown on electrical plate No 3 of MES schedule part-I, and as specified including the following :-(i) Galvanised steel earth plate of size 60cmsx60cmsx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level. (ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer). (iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc. (iv) 15 mm bore light grade, GI pipe for protection to earth-strip. (v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide primer to exposed steel surfaces. (vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete all as specified.

S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep, not exc. 10 Sqm on plan and getting out complete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured.

S&F cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

Returning, filling in, earth including spreading, leveling watering and well ramming in layer each not exceeding 25cm thick, complete all as specified.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps, socket & elbow etc,and taking out existing pipe, complete all as specified.

S&F stationary water heater (Geyser) vertical storage type, electric driven, closed vented type (5 star rated marked) of capacity 25 Ltrs, including provision of bolts, nuts and washers, size of the bolt 15 cm long, 12 mm dia embedded in wall, complete all as specified.

S&F 15 mm bore bib tap of, screwed down, high pressure with crutch or butter fly handle, complete all as specified.

S&F 15mm stop valve cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule, complete all as specified.

S&F gun metal non return valve suitable for 15 mm bore pipe, complete all as specified.

S&F PVC connection 15mm size with brass nuts on both ends, 450mm long with PTMT with 02 Nos of unions suitable for hot water supply, complete all as specified.

M/s Harkesh Kumar Bansal

M/s Bansi Lal

Marwaha Builders

M/S Yashpaul Gulati

M/s Mukand Lal Khanna

KAMALJIT SINGH CONTRACTOR

M/S Sandhu Const.Co.