Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹5.5 L+₹42,065 (8.34%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹6.0 L+₹92,160 (18.3%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹7.2 L+₹2.2 L (43.1%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 |
Tender Value
₹6.8 L
EMD Value
₹13,540
Closing Date
15 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 864 EWS
GE 864 EWS, BB CANTT SRINAGAR
REPAIR MAINT OF HIRED/ LEASED/RENTED BLDGS IN CHARGE OF GE 864 EWS, BB CANTT SRINAGAR
2022_MES_552599_1
864/WS-40/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE 864 EWS, BB CANTT SRINAGAR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹13,540
Yes
14 Nov 2022
17 Sept 2022
22 Oct 2022
17 Sept 2022
15 Oct 2022
1 Oct 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 75mm thick PCC (1:4:8), Type D2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed.
M&L for chequered cement concrete tiles with white cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and as directed.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.0 sqm each complete all as specified and as directed.
S&F double sutters (glass & wire shutters) sound proofing UPVC window with 20mm thick sound proofing toughened glass and numbers including sound proofing beads, handles and glazing clips, joints cleats, rubber gaskets, shutter, handle, tower bolts, wire mesh, fixing on shutter etc. complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F GI frame work fo seamless ceiling of grid size 605x605mm comprising of GI perimeter channel 0.55 thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.
S&F 12mm thick gypsum board false ceiling fixed with screw to GI frame work as per manufacturers instructions complete all as specified and as directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed.
M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new/old works with two or more coats complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surfaces of walls and applying a coat of Oil Bound Distemper complete all as specified and as directed (Bldg upto and including 3 storeys)
M&L for preparation of old plastered or unplastered surfaces of ceilings and applying a coat of Oil Bound Distemper complete all as specified and as directed (Bldg upto and including 3 storeys)
M&L for wooden laminated flooring of size 1200 x 200 x 6 to 8mm thick having fire rating class B-1 fixed above PVC sheet and cushion with and including 9mm thick plywood grade BWR type BB 5 Nos of ply fixed with nails to timber including dismantling old wooden flooring complete all as per manufacture's instruction and as directed. (Make : PERGO/VISTA/GREEN PLY)
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section, in any position as in unframed works complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrguation side lap, fixed with L type or J type or cranked hook bolts and washers, ISI marked, in roofs, walls etc with grade of zink coating 275, complete all as specified and as directed.
M&L for 40mm thick PCC (1:2:4), type B1 (using 20mm graded crushed stone aggregate) as in floor finishes complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for vitrified ceramic coloured tiles (Dark shade) 10mm thick (square/rectangular) polished, area of each tiles n.exceeding 0.36 sqm, in floors etc over and including 20mm thick screed bed in cement mortor 1:6, set and jointed in neat cemetn slurry and pointed in white or coloured cement to match with shade of tile complete all as specified and as directed.
M&L for 2nd class hard wood clean swan in scantling, framed work as in chowkhats complete all as specified and as directed.
S&F 30mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edge), or of veneered particle board medium desnisty, wood particle board with commercial face veneers complete all as specified and as directed.
S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm complete all as specified and as directed.
S&F 150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified and as directed.
S&F 150 mm aluminum alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch socket outlets, light fittings etc and making good disturbed surfaces of walls with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and as directed.
M&L for point wiring with single runs PVC insulated FRLS grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping of suitable size with all fittings and accessories including PVC flush box/ Metal flush box/ sunken box of suitable size and drawing continuous earth wire of PVC insulated FRLS grade, unsheathed stranded copper conductor of size 1.5 Sqmm (ISI Marked) terminated the box for following type of point wiring including making good disturbed of walls complete all as specified and as directed:-
For one light/fan/3 pin socket outlet 5/6 Amps/bell point controlled by one, one way normal/modular Switch
For one 3 pin socket outlet 5/6 Amps point on same board.
For one 3 pin socket outlet 5/6 Amps independent point but below the switch board on same board.
Ditto all as per Item No. 35.00 described here-in-before but with FRLS grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 2.5 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLS grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
S&F Bell push, flush type, 5/6 Amps, single pole, 230 V (ISI marked) completed all as specified and directed.
S&F Buzzer, ding dong, AC, 230 V, Single pole (ISI marked) complete all as specified and as directed.
S&F Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5 Amps complete all as specified and as directed.
S&F socket 2/3 pin and 5 Amps, flush type, 240 volts (ISI marked) complete all as specified and as directed.
S&F switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and as directed.
S&F stepped type fan regulator flush type (ISI marked) complete all as specified and directed.
S&F Modular fan regulator electronic rotary, 0-4 steps stepped type 100 watt 240 volts 50Hz hum free 2 module with modular plate and frame complete all as specified and directed.
S&F Modular switch one way 6 Amps, one module with modular plate and frame complete all as specified and directed.
S&F Modular switch one way 16 Amps, one module with modular plate and frame complete all as specified and directed.
S&F Modular bell push with modular plate and frame complete all as specified and directed.
S&F Modular socket 6A/16A 2/3 pin combined 2 module with modular plate and frame complete all as specified and directed.
S&F modular socket 6 Amps-2/3 pin combined two modules with moduler plate complete all as specified and directed.
S&F LED light fitting fixture 20W, decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly energy efficient ready to use complete all as specified and directed.
M&L for ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.
S&F 10/13.5 Watt 6000K LED Bulk head luminaries with premium quality diffuserfor glarefree light, etc complete with accessories complete all as specified and directed.
S&F LED Mirror light fitting 1 x 10 W 6500K decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environmental friendly, energy efficient, complete all as specified and directed.
Taking down old unsv vantilation fan and repair/replacement of ventilating burn out fan motor with frame made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz AC supply of Havells or equivalent of CG/Bajaj including connecting to ceiling rose complete all as specified and directed.
Taking down old UNSV ceilling fan and refixing the same after complete repair/replacement of worn out motor with body suitable for 1200 mm sweap single phase 230/240 volts complete all as specified and directed.
S&F wall mounting fan 400mm sweep, pull cord oscillating type, single piece AS blade, 3 speed, pull cord control with complete arangement of fixing on wall, complete all as specified and directed.
M&L for 6.0 Sqmm 1100 Volts grade, heavy duty PVC insulated multistranded solid aluminium conductor cable and overall PVC sheathed in service connection including taking down old, complete all as specified and directed.
Taking down old UNSV water heater and repair/replacement with storage water heater 25 Litres capacity, vertical mounting, AC, 230 Volts, BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts etc complete all as specified and directed.
S&F MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection including taking down old unserviceable MCB distribution board complete all as specified and directed.
S&F MCB SPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity, 'C' series including taking down old unserviceable one complete all as specified and directed.
S&F MCB SPN, 240 Volts, 32 Amps, 10 kA rupturing capacity, 'C' series including taking down old unserviceable one complete all as specified and directed
S&F MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed.
M&L for sub main wiring with two runs of 6.0 Sqmm FRLS grade (ISI marked) PVC insulated, multi stranded, unsheathed copper conductor and one run of PVC insulated, multistranded FRLS grade (ISI marked) unsheathed copper conductor of size 6.0 Sqmm green colour as earth lead including PVC casing caping of suitable size including taking down old unservicable sub main wiring complete all as specified and directed.
S&F Wall/Bed light LED light fitting of capacity 2.5watt complete all as directed. Make : Philips/Wipro/Crompton
M&L for Earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, with cover and handle for lifting of cover, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I (2009).
M/S SHIMAR STAR GLACIER
M/S Mohd Shafi Bhat
M/S Paradise Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .