S/R to Kumaranga PWD Road

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of grith upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means andstacking of serviceable materials to be used or auctioned upto a lead of 1000m incuding removal and disposal of top organic soil not exceeding 150mm in thickness as per direction of Engineer-in-charge.

Flank Dressing to Proper Camber including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.

Providing 37.5mm thick Built up spray grouting after scrapping, cleaning the road surface applying tack coat using 3.00kg of bitumen for 10sqm and laying of one layer of 37.5mm thick by using 0.45cum of 25mm to 40mm grade bitumin for 10 sqm in each layer with 0.12 cum of 12mm size B.H.G. C.B chips as key stone for 10 sqm.spreading over and laying induding heating pouring, spreading bitumirl metal and chips and compacting with P.R.R including cost ,conveyance royalty taxes of all required metterials,hire and running chsrges of mechinaries T&P etc complete as per direction of the Engineer-in-charge

Providing and apppying tack coat with bitumen Emulsion using emulsion pressure distributer at the rate of 0.20kg per sqm on the prepared bituminous/granular surface etc complete as per direction of E.I.C.

Providing and laying 20mm thick premix carpet using 0.018 cum of 13.2mm and 0.09 cum of 6mm size H.G.chips with 14.6 kgs of bitumen for 10 sqm over tack coat using bitumen @ 0.48 kg/sqm including all cost, carriage, royalty of H.G. chips , cost of maxphalt, H&R charge of PRR.etc. complete as per direction of the Engineer-in-charge

Providing and laying 6mm thick pre coated Seal coating using 0.06 cum of H.G.chips 6.7mm size of approved quality and 6.8 k.g of bitumen per 10 sqm, rolling with PRR etc complete including cost, carriage,royalty of H.G. chips 6mm size, sand, maxphalt and H&R charge of PRR etc as per direction of the Engineer-in-charge

Costruction of embankment with approved material obtained from borrow pits with all leads & lifts transporting to site by mechanical means with a leads of 5 km spreading grading to required slope & compacting to meet requirement etc complete as per direction of E.I.C.

Providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.

Providing spreading metal for patch or pot hole repair and consolidation with HRR or rammers, crusher screening / gravelling and sand binding, including cost, conveyance, royalty etc. Complete as per direction of E.I.C.

Please Enable Macros to View BoQ information