Special repairs to cook house of CUL-1 and officers living of CUL-3, Spl Repair to JCO mess , cook house, toilet of Adm camp and Spl Repair to OR living barracks of Adm camp at North camp of MFFR under AGE (I) MFFR

Amount

Dismantling of Wall and ceiling boards or insulation boards with Frame Of Mild Steel , any thickness,any description, including cover fillets complete all as specified and as directed.

S &F of GI frame work for seamless ceiling comprising of GI perimeter channel .55mm thick with two un equal flanges os 20 to 30 mm and wef of 27mm fixed to surrending wall using nylon sleeves and screws at 450mm centre to centre / inter mediate channel 0.9mm thick having two equal flanges of 15mm each and wef of 45mmsuspended fromsoffit and approx 900mm centre to centre with GI cleat and steelexpansion fasterners with and including ceiling section ( not exc 1.2m length) of .55mm thickness having kurled wef of 50mm and flanges of 26mm each with lips of 10.5mmfixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed.

M&L for 4mm thick HPSC ( High pressure steam cured preprimed textured designer board,water resistant ,be placed in the grid systemall complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description, area exc 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed.

Taking down old rusted and demaged steel window/vent incl. guard bar and grill where exist of size not exc 1.5 sqm each complete all as specified and as directed.

S&F factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustabledouble nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. all as specified and directed by engr in charge

S&F Sheet glass 4mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed. Note - scaffolding and security arrangement will be of contractor .

S&F Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fireretardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) .

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fixed to chowkats complete all as specified and as directed.

S&F mild steel 300mm ordinnary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 150 mm long complete all as specified and as directed.

M&L for MS work as in hold hast etc. complete all as specified and as directed.

S&F 100mm long butt hinges, SS medium weight complete all as specified and as directed.

S&F Aluminium alloy, anodised/SS sliding door bolt 300 mm long, with haps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F 150 mm long Mild steel/SS barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

S & F 150 mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections/hardstanding, finished even and smooth w/o using extra cement complete all as specified and as directed.

Taking down cement or cement lime plaster/ grit, terrazo finish of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and as directed. (Note: Contractor shall have no claim on if plaster is carried out in patches irrespective of any height )

M&L for Rendering 15mm thick on fair faces of brick in cement mortar 1:4 finished even & smooth without using extra cement with using liquid water proofing compound as per manufacturer instructions complete all as specified and as directed. (Note :- Water proofing compound shall be measured and paid separately)

Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of wall including cornices, pillasters etc and applying two coats of cement based paint, white or tinted over a coat of alkali resistant priming paint complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall ,3mm thick wall care putty on wall over plastered surface to prepare the surface even and smooth and applying two coat of oil bond distemper on walls complete all as specified and as directed.

M & L for preparation of old surfaces by complete removal of existing treatment of walls incl paillars etc. by mechanical equipment like electric wall sander and applying two coats of oil bound distemper using rollers over a coat of primer incl 3 mm thick of wall care putty in two layers complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl for preparation of newly plastered surfaces of wall & chajjas complete all as specified and as directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint over a coats of alkali resistant priming paint complete all as specified and as directed.

M&L for Painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) and finishing with two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old /painted surfaces of steel surfaces of any description not otherwise described over 10 cm in width or girth with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed.

S&F in repair curtain drapery rod 20- 25 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and as directed. Note:- The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate in any position in floor/roof complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles area exc 0.11 sqm but not exc 0.18 sqm 7 to 8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 600 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl.10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for Virified Ceramic tiles 8 to 10 mm thick double charge (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor tiles including screed bed or bedding layer of mortar 15mm thick in CM (1:6) complete all as specified and as directed.

All as per item No 40 here-in-before but as in skirting/dado but over 8 to 10 mm thick rendering over CM 1:4 complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunkS.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fireretardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Dismantling of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone slab on vertical surface and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick cement plaster in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for Jodhpur stone slabs, self faced 10 cm thick, 25 to 35 cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete all as specified and as directed.

Demolition of Brickwork , built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling in chowkats, hold fast block etc. complete all as specified and as directed.

Demolition of cement concrete(reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and as directed.

M & L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to complete all as specified and as directed.

M&L for pre- cast reinforced cement concrete 1: 2 :4 using 20 mm graded stone aggregates in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone or concrete or bricks surrounds glazesd with putty complete all as specified and as directed.

S&F Figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed. Note - scaffolding and security arrangement will be of contractor .

Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed.

S&F of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

Taking down or up, 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed.

S&F S&F of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

S&F in repairs Bib taps brass cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore GI pipe complete all as specified and as directed.

S&F in replairs Bib tap, cast copper alloy Fancy type, CP, long neck with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed.

S&F Brass CP mixer for mixing hot & cold water screweddown for 15mm bore and fixed for wash hand basin complete all as specified and as directed.

S&F in repair grating 75mm dia of stainless steel with and without hole having minimum weight 75 gm complete all as specified and as directed.

S&F in repairs Stop valves/angle valves , cast copper alloy screwed down, high pressure, brass with crutch or butterfly handle, screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm bore complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 125mm size with swivel joints, fixed in repairs complete all as specified and as directed.

S&F Eclipse single lever 2 inlet Hi flow Diverter complete all as specified and as directed.

S & F in repair Ball valves 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm dia (minimum weight 210 Gms) and fixed complete all as specified and as directed.

M&L for Vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, fixed in repairs including 32mm bore brass chromium plated waste fitting and 32mm bore PVC waste pipe of sufficient length complete all as specified and as directed.

S&F 1 pcs toilet seat ,ceramic material size 500x360x350mm gloss white seat cover and flushing cistern including all connected fitting complete all as specified and as directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 75mm dia complete all as specified and as directed.

S&F in repair PVC Pipe (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 100mm dia complete all as specified and as directed.

S&F PVC (SWR) bends (any radius), disminishing pieces or tappers 110mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) bends (any radius), disminishing pieces or tappers 75mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) branch pieces ,Double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 110 mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore P traps complete all as specified and as directed.

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) Note rate quoted by contractor to be deemed all connected items complete all as specified and as directed.

S&F Neoprene/ EPDM rubber gasket complete all as specified and as directed.

Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 500 lit but not exc1000lit complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks of capacity 1000 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed. Notes :- (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured and ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and ball valve as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

All as per item No 86 above but except sheets complete all as specified and as directed.

Dismantling wrought iron or mild steelwork of any description complete all as specified and as directed.

S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, withoutconnecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conferming to Fe-410W Gde-E-250 quality A complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm but nexc 10 cm long and dia of shank 5 to 10 mm complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair CP soap dish, fancy type fixed to wall with CP brass screws , complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm longbetween flanges complete all as specified and as directed.

S & F Towel Ring of PTMT fixed with and including Chromium plated brass screwsand wooden/plastic cleats (Minimumeight 90gms) complete all as specified and as directed.

S&F Brass Hat pegs, solid body, 125mm to 175 mm complete all as specified and as directed.

S&F in repair PVC grating 125 mm dia complete all as specified and as directed.

Taking down old rusted and demaged steel window/vent incl. guard bar and grill where exist of size not exc 1.5 sqm each complete all as specified and as directed.

M&L for Point wiring for one light point/fan point/exhaust fan/bell point with FRLS copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and sheathed of size 2.5 Sq mm single core multistand in and including PVC concealed conduit Medium class 25 mm dia ISI marked with all fittings such as tees, bends, MS sunken box, modular plates as per site requirement for one fan/ light/Exhaust fan or 5/15Amps socket or bell/buzzer point controlled by one switch including provision of 2.5 Sqmm PVC insulated sheathed copper conductor cable, single core multistand as earth wire to common earth & connecting to earth dolly complete all as specified and as directed.

All as per item No 100 here-in-before but socket point on the 5/6A independent board with other switches complete all as specified and as directed.

All as per item No 100 here-in-before but socket point on the same board with other switches complete all as specified and as directed.

All as per item No 100 here-in-before but cable of 4 Sq mm for 15 Amp switch socket outlet on independent board including provision of 4 Sqmm PVC insulated unshethed multistranded copper conductor as earth wire complete all as specified and as directed.

Supply and fix Modular switch 1 way 6A, 1 modul complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A, 1 modul complete all as specified and as directed.

Supply and fix Socket, 6A - 2/3 pin combined 2 modul complete all as specified and as directed.

Supply and fix Socket, 16A - 2/3 pin combined 2 modul complete all as specified and as directed.

Supply and fix Fan step regulator, 120W - 2 module complete all as specified and as directed.

Supply and fix LED inverter battery 20W CDL, tube light energy efficient with backup of 3 hrs autocut off features at full charge, high lumen 100 lum/W complete all as specified and as directed.

S&F in replacement of ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm,42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and as directed.

Supply & fix Air Circulator fans wall mounted 450 mm sweep,230 volts single phase, motor speed 1440RPM,air delivery 125 CMM,double ball bearing, Al blades, reversible complete all as specified and as directed.

Supply and fix exhaust fan,1400RPM motor with copper winding steel body AC single Phase 230V of size 450 mm sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

Supply and fix LED street light power 35(+-10%)Watt,input voltage 90-270 VAC range,input current-0.15A,power factor>0.95,led type COB,3850lm,110lm/W, CCT-5700KCRI.70,die-cast aluminium,IP66,IK07, lens -Polycarbonate street optic THD<10% as per IS10322 part 5/sect1,IEC LM-80 with suitable size of baracket complete all as specified and as directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, including hot and cold pipes connection complete all as specified and as directed.

Supply and Fixing MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete all as specified and as directed.

Supply and Fixing MCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed.

M&L for sub main wiring in PVC concealed conduit with 2 single core 6sqmm multi-stranded PVC insulated cable sheathed 1100 volts grade with one earth wire of 6 sqmm copper conductor cable connected to common earth and earth dolly complete all as specified and as directed. (Note two run of 6 sqmm and one run of 6 sqmm will be measured as 1 RM.

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 8 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall,and blanking plate as reuired complete all as specified and as directed.. Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 12 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall,and blanking plate as reuired complete all as specified and as directed. Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate

M&L for Earthing complete with galvanised steel perforated pipe electrode, 40mm bore, medium grade, 2.5 metres length,buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion.

Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed.

Taking down of unserviceable DBs/switch fuses/ changeover in sheet steel enclosure complete with MCBs/Fuse/grips any capacity and removing from site and making good disturbed surface of wall, floor etc. Taking after disconnecting all cable complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 2 core complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25Sq mm 2 core complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth for route of cable and getting out complete all as specified and as directed.

Returning, filling in soft/loose soil including spreading, levelling, watering and well ramming, in layers not exc 25 cm complete all as specified and as directed.

Removing of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Supply,laying of double wall corrigated pipe of outer dia 77mm and inner dia 63 mm for cable protection as per IS-16205 complete all as specified and as directed.

Taking down of ceiling fan/ exhaust fan/ air circulator fan from the existing position complete with disconnecting electric connection and deposit to MES store yard complete all as specified and as directed.

Taking down of geyser from existing position and complete with disconnecting electric connection and deposit to MES store yard and necessay repair will be carried out and refixing it original place after make it serviceable complete all as specified and as directed.

Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and as directed.

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 4 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall,and blanking plate as reuired complete all as specified and as directed. Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate .

Supply and fix of rechargable LED bulb of capacity 12 watt complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25Sq mm 4 core complete all as specified and as directed.

Supply,laying of double wall corrigated pipe of outer dia 77mm and inner dia 63 mm for cable protection as per IS-16205 complete all as specified and as directed.

Supply, install, test and commissioning of factory made floor mounted LT cubical panel confrming to CPRI specification board out type (double door) made out of 3.15mm thick CRCA sheet totally enclosed with necessary ventilations, weather, dust and vermin proof IP-53 minium with front and rear opening and locking arrangement 415Volts, 3 phase, 50 Hz having aluminium bus bar of capacity 125Amps and of suatable size to house all LT switch gears and accusories as mentianed below and full neutral duly colour coded and for neutral supported with DMC/SMC insulators colour coded complete connection from bus bar to MCCB with suitable copper cable, panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1, MS channels for base frame 50x50x6 mm and supports, GI nut, bolts, washers etc. The panel board shall be powder coated and red oxided primed complete all as specified and as directed :- (a) The following items shall be provided in one compartment :- (i) Digital Voltmeter - 01 No, (ii) Digital Ameter - 01 No (iii) Three Indication LED Lamp Incomming - (i) MCCB 4P, 63AMP, 25 KA -01 No Out going :- (i)MCB SPN , 63 Amp -05 Nos

Supply, install, test and commissioning of factory made floor mounted LT cubical panel confrming to CPRI specification board out type (double door) made out of 3.15mm thick CRCA sheet totally enclosed with necessary ventilations, weather, dust and vermin proof IP-53 minium with front and rear opening and locking arrangement 415Volts, 3 phase, 50 Hz having aluminium bus bar of capacity 125Amps and of suatable size to house all LT switch gears and accusories as mentianed below and full neutral duly colour coded and for neutral supported with DMC/SMC insulators colour coded complete connection from bus bar to MCCB with suitable copper cable, panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1, MS channels for base frame 50x50x6 mm and supports, GI nut, bolts, washers etc. The panel board shall be powder coated and red oxided primed complete all as specified and as directed:- (a) The following items shall be provided in one compartment :- (i) Digital Voltmeter - 01 No, (ii) Digital Ameter - 01 No (iii) Three Indication LED Lamp Incomming - (i) MCCB 4P, 63AMP, 25 KA -01 No Out going :- (i)MCB SPN , 63 Amp -07 Nos

Supply and fix LED street light power 35(+-10%)Watt,input voltage 90-270 VAC range,input current-0.15A,power factor>0.95,led type COB,3850lm,110lm/W, CCT-5700KCRI.70,die-cast aluminium,IP66,IK07, lens -Polycarbonate street optic THD<10% as per IS10322 part 5/sect1,IEC LM-80 with suitable size of baracket complete all as specified and as directed by Engineer-in-Charge.

M/S Shree Ram Enterprises (BID ID -3466043)

MSR INFRATECH (BID ID -3466373)

SHYAM ENTERPRISES (BID ID -3466979)