Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹62.8 Laccepted-aoc | accepted-aoc |
Tender Value
₹62.9 L
EMD Value
₹1.3 L
Closing Date
7 Apr 2026, 4:00 pmClosed
Rural Development and Panchayat Raj Department
SHAMSUNDAR KALEKAR
Repairs to road from Elenavadagi village to Bolani village in Aland Taluka under 5054 for the year 2025-26.
RDPR/2025-26/RD/WORK_INDENT25181
RDPR/2025-26/RD/WORK_INDENT25181
Open
Roads
Two Tender Document System(Two Cover)
RDPR Division Office Kalaburgi
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
3.To qualify for award of this contract, Each tenderer in his name should have in the last five year i.e, 2020-21 to 2024-25 Satisfactorily completed, as a prime contractor 50 percent of amount pu to tender at least one similar work such as Road Work of value not less than Rs.31.47 Lakhs attach certificate by not below rank of Executive Engineer with Indent No. from eProcurement Portal
4.To qualify for award of this contract, Each tenderer in his name should have in the last five year i.e, 2020-21 to 2024-25 Satisfactorily executed quantities of works in any one year for continues period of 12 months 1.Earthwork Excavation / Embankment / Sub Grade Earthen Shoulder 116.85 Cum 2.GSB 115.13 Cum 3.WBM/WMM 66.56 Cum 4.BT 435.00 Sqm 5.PCC/RCC 223.60 Cum 6.TMT Steel 18.72 MT
5.Line of Credit Rs. 18.88 Lakhs should be enclosed in prescribed format (unconditional)
1.The Tenderer shall have valid class III and above KPWD Licence
6.Bid Capacity on Letter of the contractor
2.To qualify for award of this contract, Each tenderer in its name should have in the last five year i.e, 2020-21 to 2024-25 Achieved in at least Two financial years an average annual financial turnover not less than in all classes of civil engineering construction works only of Rs.62.93 Lakhs. Attach certificated from C.A. on Letter Head. Two times amount put to tender. with UDIN No. otherwise bid will be directly disqualified
₹1,580
₹1.3 L
5 Oct 2026
13 Mar 2026
8 Apr 2026
7 Apr 2026
Repairs to road from Elenavadagi village to Bolani village in Aland Taluka under 5054 for the year 2025-26.
Clearing and Grubbing Road Land. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, remo...
Surface Drains in Soil Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated materi...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and leadwith all lead, lifts, loa...
Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rol...
Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting ...
Granular Sub-base - Grading III Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared ...
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom with all l...
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30 to required line, grade and level...
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30 Case - II : Type...
Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast) with all lead, lifts...
Direction and Place Identification Signs upto 0.9 m2 Size Board: Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheet...
Retro-Reflectorised Traffic Signs: Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ov...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specificationwith all lead, lifts, loading & unloading charges, cost and conveyance o...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, s...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
25181 KW3 BT Road.docx
Tender Document • 1.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .