REPAIR TO MES INSTALLATION UNDER AOR OF AGE B/R-I OF GE (SOUTH) MAMUN

Amount

Taking down cement plaster on brick walls or stone walls or concrete surface any description etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering plaster in two layers (5mm thick in cement mortar 1:4 over 10mm thick in cement mortar 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement in top layer only complete all as specified and directed.

M&L for 10mm thick rendering plaster on fair/unfair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering plaster in cement mortar 1:3 on ceiling surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering plaster in cement mortar 1:3 on facia or edging of chajjas and roof projections etc. including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for repair to RCC sunshade, chajjas, balconies, bands, beam and similar RCC work at any position/height by dismantling loose/ disntegrated portion and dubbing out with cement concrete 1:1.5:3, 40 to 100mm thick using 6 to 12 mm graded stone aggregate to make up and finished to required shape incl provision of necessary supports if required and removing corroded reinforcement and binding with and including new reinforcement as per site conditions and rendering with 5mm thick in cement mortar 1:3 complete all as specified and directed. Note :- The cost of scaffolding necessary for execution of work and protective measures for upto height of double storey building as directed by Engr in charge shall be included in the quoted rate and nothing extra shall be admisible on this account. The contractor shall keep this aspect in mind while quoting the rate.

M&L for preparation of newly plastered surface of external wall and applying two coats of anti fungal/anti algae exterior weather coat paint, white or tinted complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall, applying 2mm thick wall care putty, rubbing the surface to make the surface even & smooth and applying two coats of oil emulsion distemper over a coat of chalk whitening primer, complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of oil bound distamper white or tinted complete all as specified and directed.

M&L for preparation of old surfaces of walls oincluding washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots andapplying one coats of antifungal/anti algae of exterior weather coat paint white or tinted complete all as specified and directed.

M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old surfaces of wooden & wood based articles any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Taking down existing roof treatment of any description incl mud phuska or PCC padding if any (any no of layers), including trees with roots, bushes, grass etc removal of debris in low lying area exc 1.00 km but n.exc 2.00 km complete all as specified and directed.

M&L for 20mm thick screed bed and bedding layer in cement mortar 1:3 on existing RCC roof slab, finished even and smooth mixed with liquid WPC as per manufacturer instructions @ 0.200 ltr per 50 kg of cement complete all as specified and directed. Note: WPC shall be measured and paid for separately as supply only.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in levelling course on existing roof or sunken floor of toilet portion, rounded and chamfered on edges, complete all as sepecified and directed.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water. (b) Applying bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC 1:2:4, type B-0.

Supply only liquid water proofing compound complete all as specified and directed.

Demolition of brick or stone / concrete block / stone boulder masonry built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles complete all as sepecified and directed.

M&L for Brick work with fly ash bricks, old size, straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per description of srl item no.21 here-in-before but except bricks. Note:- Serviceable bricks retrieved by demolition of existing brickwork shall be used.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.

M&L for 50mm thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor finishing in even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in cement mortar 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for roughening surface of old concrete by picking, sweeping clean and washing down with water to remove all loose dust etc.and applying brushing neat cement slurry with 3.00 kg of cement per sqm, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges if required including dismantling existing slab/ tiles with bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for machine cut kota stone slab as in riser of skirting/dado etc of 16-18mm thick over and including 10mm thick rendering in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges if required including dismantling existing slab/ tiles with bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F in repair Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but not exc 4.00 Sqm each and removing from site, complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each and removing from site, complete all as specified and directed.

S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3.

S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 50 x 100mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length (MS hold fasts/lugs or SS fasteners shall be paid separately) complete all as specified and directed Note :- i) WPC solid door / window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable but no extra payment on this account shall be made. ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 50 x 125mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length (MS hold fasts/lugs or SS fasteners shall be paid separately) complete all as specified and directed Note :- i) WPC solid door / window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable but no extra payment on this account shall be made. ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F factory made single extruded WPC (Wood Polymer Composit) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) having minimum density of 650kg/cum, and screw withdrwal strenght of 1800N (face), 900n (edge), minimum compressive strength 50 N/Sqmm , modulas of elasticity 850N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixing with stainless steel butt hinges of rerquired size with necessary full body threaded star headed counter sunk SS screws all as specified and directed . Note :- i) stainless steel butt hinges and necessary SS screws shall be paid separately). ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor overall length of cover plate 150mm in size complete all as specified and directed.

S&F 300mm long MS sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F 125mm long MS pressed handle, oval type stove enamelled black type complete all as specified and directed.

S&F 125mm long MS barrel tower bolt, stove enamelled black with bright bolt fixed type complete all as specified and directed.

M&L for preparation of new surfaces of wooden & wood based articles of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of new surfaces of steel & iron work of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips,complete all as specified and directed.

Taking down existing rolling shutter and refixing to same opening after repairing, easing and adjusting incl replacement of ball bearings, anchoring rod, gear box and cranck handle, safety lever locks mild steel with 4 levers for rolling shutters, necessary welding where required complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in cement mortar 1:4 for laying floor finishes, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in cement mortar 1:4 for laying floor finishes, complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over sand cushion and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. Note:- Sand cushioning shall be measured & paid for separately.

M&L for Sand filling as sand cushion under paver blocks using clean graded fine sand including levelling watering & compacting to required gradient complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) in edging of path (interlocking paver) including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Machine pressed precast coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in cement mortar 1:6, including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base floor etc., including demolition of existing floors complete all as specified and directed.

D S INFRASTRUCTURE AND DEVELOPERS (BID ID -3068511)

dadwal engineers (BID ID -3076846)

WALIA ENTERPRISES (BID ID -3066264)

M/S HIMANSHU BUILDERS (BID ID -3076691)

M/S NARESH KUMAR SHARMA (BID ID -3068210)

SUBASH MAHAJAN (BID ID -3079516)

Bidder Name

SUBASH MAHAJAN

dadwal engineers

WALIA ENTERPRISES

M/S VIJ CONSTRUCTION CO

D S INFRASTRUCTURE AND DEVELOPERS

M/S NARESH KUMAR SHARMA

M/S HIMANSHU BUILDERS