CONSTRUCTION OF QUALITY MARKETING CENTER AT FARIDABAD (BOQ FOR THE WORK PDG. E.I., POWER MOTOR WIRING, LIFTS and STREET LIGHT ONLY)

Amount

Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire.Size 1.50 sqmm ( 48 / 0.20mm).

Suply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.15 amp.to 60 amp. 415 V ,10 KA 3-phase.

100 amp.to 220 amp.415 V,10 KA 3-phase.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide.Size 40 mm x 40 mm x 6 mm.

Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Supply and erection of blanking sheet in existing distribution board.(L) Miniature Circuit Breaker and Isolator.

Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections.SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.

TP MCB 6 amp. to 32 amp.

Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. .

Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick.

Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

Galvanised iron pipe 50 mm dia on flushed.

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 65 mm dia.

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Extra for using salt and charcoal / coke for pipe earth electrode as required.

Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as required.

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Pdg. and laying earth connections from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.

Pdg. and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required .

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refiling of trenches. 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 25 Sq. mm 3.5 Core Ard. Cable .

35 Sq. mm 3.5 Core Ard. Cable .

16 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .

Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required. 15 mm dia.

Supply and erection of caution notice plate in three languages.

Supply and erection of shock restoration chart in glass frame

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.Size 1.5 sqmm (3 / 0.81mm).

Size 4 sqmm (7 / 0.85mm).

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work.25 mm dia

Supply and erection of copper lugs including crimping etc.upto the entire satisfaction of Engineer-in-Charge of work.1.5 sqmm to 2.5 sqmm

4 sqmm to 6 sqmm

Supply and erection of M.S Saddles and clamps on wall/RCC parapit for fixing the under ground cable at a distance of .60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect.

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work.

Pdg. and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect.10 amp. 1 way switch

10 amp. 2 way switch

20 amp. switch

10 amp. socket

16 amp. socket

Bell push

Fan regulator

Call bell Ding-Dong ( Monitca )

Blinking Plate

Pdg. and fixing GI concealed sheet metal boxes inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material requiered to complete the job in all respect.1 & 2 module

3 Modules

4 Modules

6 Modules

8 Modules

12 Modules

Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of work. PVC pipe of 32mm dia

Supply , erection, testing and commissioning of wall / free standing floor mounting dust and vermin proof compartmentalized cubical Panel made out of 2.0 mm thick CRCA sheet, required hardware, 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel, dully painted by 2 coat of zinc / Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/ Neoprene ruBus Barer gasket of not less than 3 mm thickness, separate detachable gland plate MS base channel, hinged door with inter locking arrangement for equipment / switch gear, Transparent acrylic sheet shall be provided in front of bus bar compartment ot prevent direct access to bus bars. Extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring ( copper) and fuse protection. ( only outer area on all sides shall be measured).

Supply and erection of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required size and shape and insulation with colour coading heat shrinkable PVC sleeves complete in all respect upto entire satisfaction of Engineer-in-charge of work.

Supply & fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respectRotary handle up to 125 A, MCCB

Rotary handle above 125 A, MCCB

Supply and errection of double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of the labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.HDPE pipe 63/50 mm outer dia/ inner dia.

Supply and errection of Hot Dip Galvanized octagonal pole 3 mm thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.8 Mtr. Long pole with top dia 70 mm and bottom dia 135 mm with base plate of size 225 x 225 x 16 mm

Supply and erection of module case circuit brecaker single pole/ 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job the job in all respect up to the entire satisfaction of the Engineer -in - Charge of the work.4 pole MCCB 6 to 63 amp.

4 pole MCCB 100 amp.

4 pole MCCB 300 amp to 400 amp.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular inner and outer plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc with all labour, material, chasing, refelling of walls complete in all respect upto entire satisfaction of Engineer in Charge .Light Point/Exhaust Point Short Point

Medium Point .

Long Point .

Light Point without control Short Point

Medium Point .

Long Point .

Fan Point Medium Point .

Long Point .

Twin control light point with 2 way 5 amp. single pole switch Medium Point .

Long point.

Call bell point including M.S box of size 180 mmX100 mmX 60 mm deep for Call bell Long point

3 pin 5 amp. plug point including earthing the 3rd. pin etc.Short point.

Medium point.

Long point.

3 pin 15 amp. plug point with 4 sq mm PVC insulated copper conductor cable including earthing the 3rd. pin etc. Medium point.

Long point.

S/E of Modular Type junction box of size 75mm x 75mm with face plate and RJ connector suitable for connection of telephone wire with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer in Charge of the work.

Supply and erection of 1 no. 16 way moduler box made of G.I. sheet with inner & outer plate including cost and fixing of 4 nos. sockets and 4 nos. switches of 10 amp and 1 no. multi socket and switch of 16/20 amp, M.S. box duly recessed in wall, cost of necessary cement and sand mixture making necessary connection complete in all respect upto the entire satisfaction of Engineer-in-charge of work. (for computer point )

Supply and erection of Double door sheet steel superline/ Powerline Vertical distribution boards suitable for TP/ FP veritcal MCCBs upto 125 amp as incomer (but without cost of MCCB) complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 8 way Double door TPN distribution board suitable for 100 amp. 4 pole MCCB but without cost of MCCB. (Make : Havell's /Standard)

12 way Double door TPN distribution board suitable for 100 amp. 4 pole MCCB but without cost of MCCB. (Make : Havell's /Standard)

Supply & erection of A.C. ceiling fan Size of ceiling fan 48" (1200mm) sweep complete blade, canopy and downrods etc. and other material equired to complete the job in all respect upto the entire satisfaction of Engineer - in - Chage of the work. (Make : Usha, Bajaj,Crompton,Khaitan, Orient)

Supply & erection of A.C. ceiling fan Size of ceiling fan 56" (1400mm) sweep complete blade, canopy and downrods etc. and other material equired to complete the job in all respect upto the entire satisfaction of Engineer - in - Chage of the work. (Make : Usha, Bajaj,Crompton,Khaitan, Orient)

Supply and erection of metal blade exhaust fan 300 mm size medium duty with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge. (Make : Bajaj, Crompton, Khaitan, Orient, Havells)

Supply & erection of 1x 18 LED fitting with other material equired to complete the job in all respect upto the entire satisfaction of Engineer - in - Chage of the work. (Make : Bajaj,Crompton,Wipro,Philips, C&S Electric & Surya )

Supply and erection of surface mounted 12 watt LED light complete with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In - Charge. (Make : Bajaj, Crompton,Wipro, Philips, C&S Electric, Surya & Havells )

Supply and erection of 2x2 36 watt LED panel complete with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge. (Make : Bajaj, Crompton,Wipro, Philips, C&S Electric & Surya )

Supply and erection of 90 watts LED street light fittng with lense IP 65/66, HP dia cast aluminium hoising body including erection of same on 9 mtr. Pole with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge. Make & model Philips BRP410 LED 091 CW HE MR PC S2 PSU GR/ Bajaj BRTFG90WLEDWW/ Crompton LSTP90CDL/ Wipro LR02-102-XXX-57-XX

Supply and erection of single arm bracket made of 50 mm dia G.I pipe B class ISI 1.5 mtr. long with 25 mm dia G.I. bottom pipe with 75 mm dia 60 cm. long G.I. collar pipe, top covered with ornamental cap duly welded, painted 2 coats of aluminium paint on bracket and golden paint on ornamental cap including erection of same with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.Single side G.I street light bracket(as per standard specifications of manufacturer of GI octagonal pole).

Supply and erection of 40/45 watt LED post top lentern including erection of same on gate pillers with anecessary nuts & bolts and making necessary connection complete in all respect upto entire satisfaction of Engineer - In- Charge. Make Crompton LPTO-40-CDL or equivalent model of Philips, Wipro & Bajaj

Supply, erection, testing and commissioning of machine room less electric traction passenger elevator of OTIS / KONE / MITUSUBISHI / KINETIC HUNDAI/ SCHINDLER/ HITACHI / JOHNSON/ ORBIS make suitable for 20 persons (1360 kg. weight) having speed @ 1 meter per second to travel from ground floor + 5 upper floors with 6 stops, 6 opening on same side with ARD system and full height infra red safety as per technical specifications attached upto the entire satisfaction of the Engineer-in-charge of work.

Supply and erection of man hole (hodi) of size 30cms. X 30 cms. complete with masonary enclouser as required complete in all respect

Supply and erection of factory manufactured general purpose enclosure suitable for installation of three/four pole single MCCB upto 250/400 amp. Current rating. The enclosure should be duly powder coated painted complete with necessary nuts and bolts required for fixing the enclosure on wall with all labour and material required to complete the job in all respect.Upto 250 amp.