Repair renovation of Qtr No 03 block old APHQ at Gulshan Ground

Amount

Brick work with FPS bricks of class designation 75-A in super structure upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including curing and all carriages and cost of materials involved upto site of work complete.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead including all carriages and cost of material involved.(1:4) Mix (1 cement : 4 course sand).

Providing and fixing of wardrobe 2’-0” deep of approved design & make including shutters, partitioning with 19mm & 12mm thick (water proof) ply board of approved make and quality and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job)

Cupboard (Box type)

Kitchen cupboard

Cupboards (Shutter and shelves only)

Providing and fixing Ceramic digital glazed wall / Floor tiles in toilets/baths and Kitchen of size 1'6"x1'0" or above in walls and 1'0"x1'0" or above in floors (antiskid), of approved make like NITCO, KAJARIA or equivalent etc. over 12 mm thick bed of cement mortar 1:4 and jointing with grey cement slurry including pointing in white cement mixed with pigment of matching shade complete, including all leads, lifts, costs and carriages of all materials involved.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (as directed by the EIC at site).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. Including all carriages and cost of material involved.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats)

Providing and fixing in position powder coated aluminium (min. 16 gauge ) in doors and window shutters, including cost of aluminium frame, accessories, fixtures, glazing, wire guage, ACP sheet, etc all complete, including all leads, lifts, costs and carriages of all materials involved. (Section of Aluminium as directed by EIC with prior approval)

Providing and fixing panelled or panelled and glazed shutters for doors, windows, clerestory windows, including ISI marked M S pressed butt hinges bright finished of required size with necessary screws including paneling and glazing all complete as per direction of EIC with 2nd class kail wood.

Providing and fixing 35mm thick wire gauze shutters of 2nd class deodar wood, using galvanized M.S wire gauze of average width for aperture 1:4mm with wire of dia 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S butt hinges with necessary screws.

Providing and fixing of curtain Rods of S S complete with all fittings and accessories as directed by EIC at site.

Providing and fixing C.P. fittings and sanitary ware of approved brand (Jaguar , Parko, Cera or equivalent.as directed by EIC).

C P Bib Cock long nose

C P Angle valve

Looking Glass Standard Make

W. C. one piece (Western) with PVC flushing cistern and all fixtures complete.

Tumbler

Waste pipe with coupling

PVC Connection 24”

C P Grating

Soap Dish

C P Nipple

Corner shelves

Glass shelves

Gyser 50 ltrs (Havells/ Venus or equivalent)

Pillar Cock

Sink Complete 18” x18” (450mmx450mm) Stainless steel

Sink Mixer

Engagement of labour skilled/ unskilled for various dismantling works like tacking of floors, brick work, damaged tiles, etc including stacking of serviceable material as directed by EIC and disposal of unserviceable material up to 50 mtr lead.

Labour

Carpenter

Providing and fixing in position of aluminium hardware fittings of standard and approved make including costs of materials and fixtures involved.

Al-drop 6”

Tower bolt 6”

Handle 5”

Providing and fixing of black Granite over the kitchen counter complete Job including costs and carriages of all materials involved and also cost of making moulding or as directed by EIC. (Black Granite).

NARESH GUPTA CONTRACTOR

Anil Gandotra