RR Damages to Masli Jitita Dhakgaon road km 00 to 1200 Sh PL MT of road km 0200 to 6000 UNDER PDNA

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 (Eighty-Hundred) KN static roller in stages to proper grade and camber, applying and brooming, stone screening /binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 (Two) as per Technical Specification Clause 405 (Four hundred Five) including carriage of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 (EightyHundred) KN static roller in stages to proper grade and camber, applying and brooming, stone screening /binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading3 as per Technical Specification Clause 405 (Four hundred Five) including carriage of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in-Charge.

Providing and applying primer coat with Bitumen emilsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70(One) kilogramme per square meter using mechanical means as per Technical Specification Clause 502 including carriage of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in Charge.

Providing and applying track coat with Bitumen emilsion (RS-I) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prpared granular surfaces treated with promer & cleaned with Hydraulic broom as per Techincal Specification Clause 503.

Providing and laying Bituminious concret with 100-120 TPH batch type hot mix plant producing an average output of 75 tonner per hour using crushed aggregate of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transprting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, leavel and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. including all leads and lifts as per direction of Engineer in charge.