Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.2 LAccepted-AOC 29 IQBAL COLONY SONWAR SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹48.5 L+₹5.1 L (11.8%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹49.1 L+₹5.8 L (13.3%)Rejected-Finance R O KHOJA BAGH BARAMULLA JAMMU KASHMIR | BARAMULLA | BARAMULLA | JAMMU AND KASHMIR | 193103 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹49.5 L+₹6.1 L (14.1%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
9 Jul 2025, 6:00 pmClosed
GE 864 EWS
GE 864 EWS, C/o 56 APO
REPAIR / REPLACEMENT OF EXTERNAL DISTRIBUTION SYSTEM AT JCO/OR MD ACCN AND EXTERNAL WATER SUPPLY DISTRIBUTION SYSTEM AT VARIOUS AREA, OTM ACCN AT BB CANT, SRINAGAR
2025_MES_713031_1
864/WS-32(T)/2025-26
Open Tender
Miscellaneous Works
Item Rate
180 days
GE 864 EWS
Class D and category a(ii)
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹98,000
Yes
30 Jul 2025
6 Jun 2025
16 Jul 2025
6 Jun 2025
9 Jul 2025
20 Jun 2025
Amount
Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for laying of pipe lines, valve chambers, man holes etc including forming bottom surface to required level and gradient and getting out in hard /dense soil, complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cms thick in soils, complete all as specified and directed.
Removing excavated soil to a distance not exceeding 59m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.
M & L cutting of road up to a size not exc 1.5m wide and not exc 1.5m depth for laying of water pipe lines making good the disturbed surfaces so as to match with existing finishing with PCC 1:2:4 type B1 , cement motor in CM 1:2, complete all as specified and directed.
S & F in repair PPR fittings, ISI marked, smooth finished and make embossed on fittings complete all as specified and directed for the following :-
Elbow 20mm
Elbow 25mm
Elbow 40mm
Elbow 63mm
Socket 20mm
Socket 25mm
Socket 40mm
Socket 63mm
Tee 20mm
Tee 25mm
Tee 40mm
Tee 63mm
Union 20mm
Union 25mm
Union 40mm
Union 63mm
Tee reducing 25x20.
Taking up or down GI/PVC/PP-R water tubing and connections including cleaning the pipes free from scaling for reusing the same in repairs / alteration etc to water pipes and connections, complete all as specified and directed for the following sizes:-
15 mm bore.
20 mm bore.
25 mm bore.
40 mm bore.
50 mm bore.
75/80 mm bore.
100/110 mm bore.
150 mm bore.
Supply, lay and fixing steel water tubes, medium grade, ISI marked, galvanized with all fitting laid in trenches, to walls and ceilings or laid in floors complete all as specified and directed for following bore of pipes :-
15 mm bore.
20 mm bore.
25 mm bore.
40 mm bore.
50 mm bore.
80 mm bore.
100 mm bore.
150 mm bore.
Supply, laying and testing of Polypropylene random copolymer (PP-R) (PN-20/SDR 6)-3 Layers pipes, UV stabilized and antimicrobial welded having thermal stability with and including all PP-R plain & brass threaded polypropylene random fittings fixed such as bends, Elbow, Tee, Short Length, Socket, Union, Check Nuts, Nipples etc. (Females/Males as required), suitable for hot & cold water supply line laid in trenches, to walls and ceilings or laid in floors and including testing complete all as per manufacture’s instruction and all as specified and directed for the following outer dia of pipes :-
20 mm bore (OD).
25 mm bore (OD).
40 mm bore (OD).
50 mm bore (OD).
63 mm bore (OD).
S & F in repair GI fittings 15 mm bore, heavy grade, ISI marked, smooth finished and make embossed on fittings complete all as specified and directed for the following fittings :-
Union
All equal Tee
Socket
Nipple 50mm Long
Nipple 100mm Long
Nipple 150mm Long
Elbow
Description all as per serial item No 9.00 here-in-before, but for 20 mm bore, complete all specified and directed.
Union
All equal Tee
Socket
Nipple 50mm Long
Nipple 100mm Long
Nipple 150mm Long
Elbow/reducer elbow 20x15mm
Elbow
Tank nipple
Check nut
Description all as per serial item No 9.00 here-in-before, but for 25 mm bore, complete all specified and directed.
Union
All equal Tee
Socket
Nipple 50mm Long
Nipple 100mm Long
Nipple 150mm Long
Elbow
Reducer elbow 25mm x 20mm
Reducer elbow 25mm x 15mm
Description all as per serial item No 9.00 here-in-before, but for 40 mm bore, complete all specified and directed.
Union
All equal Tee
Socket
Nipple 50mm Long
Nipple 100mm Long
Nipple 150mm Long
Elbow
Reducer elbow 40mm x 25mm
Reducer elbow 40mm x 20mm
Reducer elbow 40mm x 15mm
Description all as per serial item No 9.00 here-in-before, but for 50 mm bore, complete all specified and directed.
Union
All equal Tee
Socket
Elbow
Nipple 50mm Long
Nipple 100mm Long
Nipple 150mm Long
Reducer elbow 50mm x 25mm
Reducer elbow 50mm x 20mm
Description all as per serial item No 9.00 here-in-before, but for 80 mm bore, complete all specified and directed.
Union
All equal Tee
Socket
Elbow
S & F in repair gun metal gate valve, ISI embossed, conforming to is 781-1984, connected with iron wheel head, screwed at both ends for iron pipes and fixed including taking down of unserviceable gate valve, complete all as specified and directed for the following sizes :-
15 mm bore.
20 mm bore.
25 mm bore.
40 mm bore.
50 mm bore.
S & F PP-R Gate valves, in repair with iron wheel head, screwed both ends for PP-R Pipes and fixed including taking down of unserviceable, complete all as specified and directed for following inner dia pipes :-
15 mm bore.
20 mm bore.
25 mm bore.
40 mm bore.
50 mm bore.
S & F in repair brass stop cock including taking down unserviceable stop cock, complete all as specified and directed for the following sizes :-
25 mm bore.
40 mm bore.
50 mm bore.
S & F in repair iron ball valve including taking down unserviceable ball valve, complete all as specified and directed for the following sizes :-
25 mm bore.
40 mm bore.
50 mm bore.
80 mm bore.
S&F in replacement of unserviceable CI non raising type sluice valve both ends flanged with CI body, ISI marked, IS 14846, pressure PN 1.6 with SS spindle with clamps and check nuts, operating hand wheel, complete all as specified and directed for the following sizes:-
80 mm bore.
100 mm bore.
150 mm bore.
M & L DI non return valve without by pass arrangement confirming to IS-5312 part-I, PN 1.6 including nuts, bolts, washers and gaskets including taking out old UNSV complete all as specified for the following sizes :-
80 mm dia.
100 mm dia
150 mm dia
M & L CI flanged ''T'' type strainers with SS mesh, PN 1.6 including nuts, bolts, washers and gaskets including taking out old UNSV, complete all as specified for the following sizes:-
80 mm dia.
100 mm dia
150 mm dia
S & F in repair pressure reducing valve including taking down UNSV valve any type complete all as specified and directed for the following sizes :-
20 mm bore.
25 mm bore.
50 mm bore.
S&F in replacement of I raising spindle type sluice valve both ends flanged with CI body, ISI marked, IS 14846, pressure PN 1.6 with SS spindle with clamps and check nuts, operating hand wheel complete all as specified and directed for the following sizes:-
80 mm bore.
100 mm bore.
150 mm bore.
Supply only Stequa 411 AE, refill. Declibac specification :- Chlorine tablets contained in plastic cylinderical sealed disposable sanitiser refill for disinfection of drinking water with arrangements of controlled release of disinfectant in water, suitable for operatiion through recommended dosing system replacement indication, visual and weight varition operation type non contact, non inhalatory, heavymetal contaminants (like Hg and Pb) in product media must be below detectio limit (BDL) and product must pass through acute toxicity test, based on which the product must be considered safe to use from human health safety point of view when use in recommneded dosage, complete all as specified and as directed.
Labour work required for opening top cover of sluice valve of sizes as under including gland cover, taking out stem with nut of brass/SS ans refixing the same after replacement of rubber and nuts/bolts/glands dori etc of appropiate sizes :- Note :- (i) Temporary arrangement for dead plate till repair time of stem/stem_nut shall be made by the contractor and rate shall deem to be included in the quoted rate. (ii) Repair to stem/stem_nut shall be paid under separate item.
80 mm dia.
100 mm dia
150 mm dia
200 mm dia.
Supply and fix in repalcement of 'Stem & GM nut" made out from SS (all as per sample) of sluice valve complete all as required and as directed for the following sizes :-
80 mm dia.
100 mm dia
150 mm dia
200 mm dia.
Supply and fix repalcement of "Cap" made out from stainless steel suitable to match with existing sluice valve complete all as required and as directed for the following sizes :-
80 mm dia.
100 mm dia
150 mm dia
200 mm dia.
Notes :- An amount of Rs 2,12,780.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.
M/S HAMIDULLAH KHUROO (BID ID -3349268)
M/S BILAL CONSTRUCTION AND CO. (BID ID -3338427)
M/S TAHIRA ENTERPRISES (BID ID -3352170)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .