erection of electric poles and streetlight line in Ayush vihar w10 of DWD division

erection of electric poles and streetlight line in Ayush vihar w10 of DWD division

RCC Pole - 9 Mtr Long, 145 Kg WL (Material charges) item no.1,b page no.3 ESCOM SR 2025-26

LT 4 Pin Cross Arm with clamps, bolts, nuts

& washers with braces - MS a) For RCC Pole item no. 13a page no. 6 (material charges) ESCOM SR 2025-26

1.1 kV Ceramic pin Insulator with GI pin (Material charges) item no.22,b page no.8 ESCOM SR 2025-26

No. 8 Strain Insulator (Material charges) CDS-5 item no.6.07page no.138 ESCOM SR 2025-26

ACSR Conductor as per IS-398 (Part2/1996) with following parameters 1)H2/H4 grade Aluminium conductor having purity of 99.7 perc 2) Conductor Resistivity of 0.028264 ohmm Rabbit ACSR(6/3.35 mm Al + 1/...

Guy set with No. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 item no. 24.a) page no.8 (Material charges) ESCOM SR 2025-26

Spiral Earth Electrode item no.2.16 page no. 136 (material charges) ESCOM SR 2025-26

RCC Pole - 9 Mtr Long, 145 Kg WL (labour charges) item no.1,b page no.3 ESCOM SR 2025-26

LT 4 Pin Cross Arm with clamps, bolts, nuts

& washers with braces - MS a) For RCC Pole item no. 13,a page no. 6 (labour charges) ESCOM SR 2025-26

Stringing of conductor Rabbit ACSR binding of

conductor on each insulator and dead ending on strain

or disc/strain insulator by means of clamps. item no.6.02 page no. 192 (labour charges) ESCOM SR 202...

Guy set with No. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 item no. 24.a) page no.8 (labour charges) ESCOM SR 2025-26

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) item no.2.08 page no. 190 (labour charges) ESCOM SR 2025-26

Digging of Pit 1.8 Mtr depth for errection of 9 to 10

Mtr Long Steel/RCC/PSCC supports as per approved

Drawing. 1.1.1) Ordinary Soil Page no. 189 item no. 1.1.1 ESCOM SR 2025-26

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32Amps PWD SR 2023-24 Page No.14 Item code5.7.2

Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 5.13.2)...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. PWD SR 2023-24 Page No.21 Item code 5.47

Supplying and fixing hylum plastic sheet 3mm thick with

necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. PWD SR 2023-24 Page No. 9 II...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling...