ADDITION/ ALTERATION AND SPECIAL REPAIRS OF CATTLE FENCING OF NORA AREA AT INS CHILKA UNDER GE CHILKA

Amount

Dismantling of post or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground post embedded in Concrete, brick work, masonry, etc. all as directed by Engr-in-Charge.

M&L for mild steel hand rails, half round or other stock section or core for wooden hand - rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to FE-290 Gde E-165 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any Description not otherwise provided for complete all as specified and as directed.

S&F mild steel screw bolt (machine made with hexogonal or square heads at one end and screwed the other or screwed both ends each screwed end to be filled with washer one nut 11 to 15 mm dia shank and exc 10 cm and n.exc 15 cm complete all as specified and as directed.

S&F 10 mm round bars as in securing of chain link fencing conforming to FE-290 Gde E-165 complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 50m from site complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 Type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Taking down galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts all as directed

Dismantling fencing wire mesh any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size (100X100) of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply only 4 mm dia M S galvanized steel wire, 100X100 mm mesh in chain link fencing, complete all as specified and as directed.

M&L for preparing new steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide zinc chrome primer all as specified and directed.

M&L for preparing new steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of black bituminous paint all as specified and directed.

M&L for preparation of new steel surfaces n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over red oxide zinc chrome primer all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (nomial mix) type B1 1:2:4 with using 20mm graded stone agg as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for Reinforced cement concrete type B1 1:2:4 with using 20mm graded stone agg as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified and as directed.

Use and waste for fair finished form work to sides of pillars, posts, struts, columns and stanchions circular on plan complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and finished concrete flat complete all as specified and directed.

S&F TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

S&F TMT bar 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

S&F Coloured glazed ceramic tiles 450X 300X 7mm thick as in gate pillar set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and incl 10 cm thick backing in cm 1:3 complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, sewage lines, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

Returning filling incl spreading, levelling watering and well ramming in layers not.exce 25 CM all as specified and directed.

Removing exca material, soil to a distance not exce 50M and depositing where directed at a level n.exe 1.50M above the existing point all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even and smooth (without using extra cement)complete all as specified and as directed

M&L for preparation of newly plastered or unplastered surfaces of wall or concrete surface and applying two coat cement base paint complete all as specifed and as directed.

S & F Framed work as in doors or gates of angle or other section conforming to Fe 410 -W (GdeE- 250) qualityA with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M/S JAGANNATH SASMAL (BID ID -3245768)

SANJAYA KUMAR PALAI (BID ID -3242101)

SAHADEV PALAI (BID ID -3246612)

UDAYA BHANU NAYAK (BID ID -3245751)

BHARAT KUMAR BALL (BID ID -3246872)

ANTARYAMI PANDA AND COMPANY (BID ID -3247086)

PRADIPTA KUMAR PANI (BID ID -3244961)

HARI HARA NAYAK (BID ID -3244967)

D RAVICHANDRAN (BID ID -3247180)

ABHIMANYU MAHARANA (BID ID -3247166)