Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST TENDERER. | |
| 2 | L2₹15.2 L+₹1.4 L (10.5%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST TENDERER. | |
| 3 | L3₹15.2 L+₹1.4 L (10.5%)Rejected-AOC MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L3 | Rejected-AOC NOT LOWEST TENDERER. | |
| 4 | L4₹16.0 L+₹2.2 L (16.3%)Rejected-AOC | L4 | Rejected-AOC NOT LOWEST TENDERER. | |
| 5 | L5₹17.2 L+₹3.5 L (25.7%)Rejected-AOC | L5 | Rejected-AOC NOT LOWEST TENDERER. |
Tender Value
₹13.9 L
EMD Value
₹28,000
Closing Date
27 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAGPUR
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR 440007
REPAIR MAINTANANCE IN THE OFFICE OF JCDA AF BUILDING AND RESIDENTIAL QUARTER 14A AND 14B AT VAYUSENA NAGAR NAGPUR
2022_MES_565397_2
8574
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹28,000
25 Feb 2023
6 Jan 2023
3 Feb 2023
6 Jan 2023
27 Jan 2023
13 Jan 2023
Amount
Demolition of brickwork or stone/boulder masnory, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework pre-cast concrete all as specified and directed.
M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed.
Material & labour for rendering 10 mm thick in CM 1:6 over brick or concrete surfaces, finished even and smooth surfaces wiithout using extra cement complete
Material & labour for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces, finished even and smooth using water proofing compound @ 3% by weight of cement. Note: WPC shall be measured and paid separately.
Supply only water proofing compound.
Material & labour for two coats of cement base paint on wall surfaces including cornices, pillasters etc, preparing the surfaces over a coat of primer complete all as specified and as directed.
Material & labour for preparation of undecorated plastered wall surfaces and applying two coats of oil bound distemper on wall over a coat of primer all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.
Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Material & labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.
Material & labour for mild steel frame work such as gates, grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 all as specified and as directed.
Supply and fixmild steel screw bolts(Machine made) with hexagonal or square head at one end and screwed the other end n exc 5 cm long and diametre of neck exc 5 mm but n exc 10 mm dia all as specified and directed.
Material & labour for mild steel plates (Plain or chequred) channel square cut or not chequred (ordinary and counter sunk) forming holes, sithout any attachment for Fe-410-W Gde-E 250 quality 'A' complete all as specified and directed.
Excavating in post holes (or similar holes) each in loose/soft n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.
Material & labour for plain Cement concrete (1:4:8) type C-2, using 40 mm stone aggregate in foundations, filling and mass-concrete complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or grith and apply two coats of synthetic enamel over a coat of red oxide primer all as specified and as directed.
M&L for preparation of old steel surfaces of any description over 10cm width or grith and apply one coat of synthetic enamel paint all as specified and as directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and as directed.
M&L for factory made Machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with 50 mm thick stone dust cousioning all as specified and directed
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (other than ground floor) including floor finishes and disposal of debirs all as specied and directed.
M& L for 100mm thick PCC type D-2, (1:4:8) (using 40mm graded stone aggregate ) as in sub base/ path completet all as specified and directed.
M&L providing PCC 1:2:4, type B1 (using 20 mm graded aggregate), 100 mm thick,finishing cement concrete surfaces fair and even all as specified and as directed.
Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.
Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5sqm each all as specified and as directed.
Taking down shutters from frame exc 2 sq. M each, all as specified and as directed.
S&F 30mm thick 1st class Hard wood Skeleton door shutters complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.
S&F 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides all as approved by GE complete all as specified and directed.
S&F pressed steel frames of size 165x60mm with hinges ,100mm size (3 Nos each choukhat) with one or more rebates including necessary fixing lugs, lock strike plate, etc all as specified and as directed.
M&L PCC (1:3:6) type C-1 for PS Frame filling all as specified and as directed.
Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.
All as per item No 32 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.
S&F sheet glass ordinary quality 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.
S&F sheet glass ordinary quality obscured or frosted on one side 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.
Dismatling of cupboard partition of any description fixed in any position with nail all as specified and as directed
S&F ply wood grade BWR type BB 18/19mm thick (PLY) ISI marked (laminated) fixed with screw to timber frame work fixed in repair all as specified and as directed.
S&F ply wood grade BWR type BB 12mm thick (PLY) ISI marked (laminated) fixed with screw to timber frame work fixed in repair all as specified and as directed.
S&F in repairs butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified and as directed.
S&F butt hinges, medium weight ,cold rolled mild steel 75mm long all as specified and as directed.
S&F Extruded Aluminium bow handles of size150 mm complete all as specified and directed
S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm size complete all as specified and directed
S&F in repairs aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.
S&F in repairs Floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm all as specified and as directed.
S&F in repairs Aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed all as specified and as directed.
All as per item No 45 here-in-before but 150mm long complete all as specified and directed.
S&F in repairs extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and directed.
All as per item No 47 here-in before but 100mm long complete all as specified and directed.
S&F in repair hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed.
M&L for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.
M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint all as specified and directed.
M&L for preparing old decorated surface including filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on ceilings
S&F 30mm thick (styles) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as shown on drawing on page 146 of SSR Part-II 2004 including taking down the old PVC door shutters as specified & as directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel tube & fixed in position as per manufacturer's instruction & fixing to wall with ancor bolt or screw with nemani wall plug (size 12 to15 cm long ) all as specified, as shown on drawing on page No 150 of SSR Part-II 2004 including taking down the old PVC door frame as specified & as directed.
S&F 100 mm long mild steel butt hinges all as specified and as directed.
S&F in repair 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and facing down old one all as specified and as directed.
S&F in repairs mild steel pressed handles, 150 mm oval type, stove enameled black all as specified and as directed.
S&F in repairs Harrison curtain rails, 19/20mm dia, anodised aluminium alloy with fixing brackets, stops, rollers etc including taking down old one all as specified and as directed.
S&F steel windows or ventilators, fixed type or side/cetre hung type with glazing bars including taking down old one all as specified and as directed.
M&L welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.
S&F in repairs mild steel handle to existing steel windows left or right (as per existing pattern) all as specified and as directed.
S&F in repairs mild steel peg stay for windows/ ventilators all as specified and as directed.
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as directed.
S&F Powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed
S&F Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed. .
Excavation in trenches n.exc. 1.50 mtr in depth and n.exc. 1.50 m wide in hard/ dense soil for drain pipes, manholes etc. all as specified and directed. .
Returning,filling in including spreading levelling,watering and well ramming in layers n.exc 25 cm thick in layers etc all as completed and as directed.
Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point.
Demolition of PCC in foundation of manholes and drains below ground level n.exc. 15 cm thick etc all completed and as directed.
M & L for concrete bed in P.C.C ( 1:4:8), type D-2 (unreinfored) (using mm graded aggregate ) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for 150mm dia pipes all completed and as directed.
All as per item No 71 here-in -before but 200 mm dia.
All as per item No 71 here-in -before but 250 mm dia.
Material & labour for 150mm bore reinforced concrete pipes ,class NP2 ,laid and jointed complete with collars all as specified and directed
All as per item No 74 here-in -before but 200 mm bore
All as per item No 74 here-in -before but 250 mm bore
M & L for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in foundation for manholes & drains completed all as specified and directed.
M & L for Precast Cement Concrete 1:3:6 type C1 as in manhole covers including form work etc all as specified and as directed.
M&L mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking , bending and binding with MS wire (annealed) not less than 0.9 mm dia all as specified and as directed by engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding and disposal of rubbish off the premises all as specified and as directed
M & L providing screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and as directed.
M&L for 10 mm thick in CM 1:3 screed bed or bedding layer of mortar for laying wall tiles or vertical surfaces (skirting/ dado etc) all as specified and as directed.
S/F vitrified ceramic tiles 10mm thick (square/rectangular) polished,dark shade area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and as directed.
M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry an pointed in white or coloured cement to match all as specified and as directed.
M&L for preparation of existing treatment on wall surfaces filling of holes, cracks and uneven surfacs of wall with wall care putty and plaster of paris and applying one coat of oil bound distemper including preparing old plaster surfaces as specified and as directed.
M&L for preparation old decorated plastered surfaces of wall and applying one coat of cement base paint all as specified and directed.
M&L for application of one coat of exterior emulsion paint of white or AF blue colour or equivalent colour as approved as GE, using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the old decorated wall surfaces, edges of slab, roof/chajja projection ana column etc. including filling the holes and broken surfaces with waterproof putty up to height 7.00 mtr, after necessary preparation all as specified and as directed.
M&L for preparation of old painted wooden surfaces of any description over 10cm width or grith and apply one coat of synthetic enamel paint all as specified and as directed.
S&F Vitreous China wash basin, white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed.
S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and as directed.
S&F but fancy type, chromium plated with long shank and cup Stop valves of bore dia 15mm screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed and all as specified and as direected.
S&F brass chromium plate Pillar taps fancy type of bore dia 15mm, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in all as directed
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)
M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement including all necessary concrete work and connecting jobs for making good the area complete all as specified.
S & F in repair Bib tap 15mm bore fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.
S & F in repair Pillar tap brass CP fency type 15mm with capston heads , screwed down high pressure for wash hand basin all as specified and as directed.
S & F in repair brass chromium plated shower rose 125 mm size all as specified and as directed.
S & F in repair brass chromium plated Towel Rail D Type 60 cm long between flanges all as specified and as directed.
S & F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, slim body low level, white, with inlet, ball valve, float and handle including removal of old one all as specified and as directed. Make : Prayag / Jaquar
S & F in repair vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor all as specified and as directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F brass chromium plate jet spary with 1.5 meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer complete all as specified and directed.
S&F Brass chromium plated tumbler holder complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F Glazed corner shelf of 12 inch with brass chromium plated railling complete all as specified and directed.
S&F 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair complete all as specified and directed.
S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair 20 mm dia Stop valves,cast cpper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for unions and fixed all as specified and directed.
S&F in repair bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed
S&F in repairs vitreous china urinals,flat back of size 65mmX355mmX265mm, white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.
M&L 18-20 mm thick granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms ( for office name plate) and like in cement (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment ot match with shade of granite.
E/M Portion
Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.
Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed by EIC.
M & L for sub main wiring (concealed/surface as required in ground) complete with four single core 10 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 32 mm dia rigid non-metallic PVC conduit heavy grade ISI marked and conduit accessories including 10 Sqmm FRls PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Make of cable : Polycab, Finolex, Havells Note: 5 run of 10 sqmm & one run of PVC conduit shall be measured as single unit
M & L for sub main wiring (concealed/surface as required in ground) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Make of cable : Polycab, Finolex,Havells Note: 3 run of 6 sqmm&one run of PVC conduit shall be measured as single unit
M & L for sub main wiring (concealed/surface as required in ground) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Make of cable : Polycab, Finolex,Havells Note: 3 run of 4 sqmm&one run of PVC conduit shall be measured as single unit
Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.
M & L for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.
(a) One light point controlled by one switch
(b) One switch socket outlet modular type 3 pin 6 amp on same board.
All as per item No 119 here-in-before but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.
All as per item No 119 here-in-before but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.
M & L for point wiring (surface) complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in PVC Caping/Casing of size 20x12 to 25x16, ISI marked, 19/20 mm dia including all accessories and making good the disturbed surface, with and including suitable modular boxes surface type of make legrand ,switch plates of make Legrand and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed Make of cable : Polycab/ Finolex /Havells
(a) One light point controlled by one switch.
(b) One ceiling/exhaust fan point controlled by one switch.
(c) One 3 pin socket outlet 6 amps on same board.
(d) One 3 pin socket outlet 6 amps on independent board.
All as per item No 124 here-in-before but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.
Note for Item No. 113 to 129 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for point wiring shall be deemed to include the cost of making good.
Taking down old unserviceable and Supply & Fix new LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V Make :CG Cat Part No. LSTS-25-CDL or equivalent in Bajaj/Wipro. Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed.
Taking down old unserviceable any type fittings and Supply & Fixing new Decorative LED light 36 watt recessed mounting type complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified. Make : CG Cat Part No. LCTLRN-36-FO-CDL or equivalent in Bajaj/Wipro/Philips.
Taking down old unserviceable and Supply & Fix new master led tube 4ft 20 W LED Tube Polycarbonate type having nominal system lumen output of 2100 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 18W (including driver). Make : Phillips/CG/WIPRO
Taking down old unserviceable and Supply & Fix new decorative box type fitting with blue coloured end caps pre wired for LED tube energy of 20 Watt . Make : Phillips/CG/WIPRO
Taking down old unserviceable and Supply & Fix new Surface mounting LED Luminaries 2ft and 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make :CG Cat Part No. LCTL-10-CDL or equivalent in Bajaj/Wipro.
Taking down old unserviceable any type fittings, Supply & Fixing new Decorative LED light 18 watt round/square surface mounting flat panel type complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified. Make : CG Cat Part No. LCDSPLN-R-18W-CDL or equivalent in Bajaj/Wipro.
Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified. Make : CG/ Bajaj/ Wipro.
Taking down old unserviceable and Supply & Fix 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent in Seimens, Anchor/Roma.
Taking down old unserviceable and Supply & Fix Switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in Seimens/ Anchor Roma.
Taking down old unserviceable and Supply & Fix socket modular type single pole one way 6/10/13 Amps multistandard 250 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in Seimens/ Anchor Roma.
Taking down old unserviceable and Supply & Fix for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed. Make : Leader/ Anchor/ Seimens
Taking down old unserviceable and Supply & Fix socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Seimens/ Anchor Roma.
Taking down old unserviceable and Supply & Fix switch modular type 16 Amps,one way with indicator, 1 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Seimens/ Anchor Roma.
Taking down old unserviceable and Supply & Fix power unit for upto 2 ton AC and geyser up to 3.5 KW modular type, 4 module,240 volts all as specified and as directed by EIC. Make : Legrand Cat No. 675558 or equivalent in Seimens/ Anchor Roma.
S & F modular white cover plate with frame 4 Module all as specified and as directed by. Make : Legrand Cat No. 675564 or equivalent in Seimens/ Anchor Roma.
S & F plastic surface box modular type 4 Module all as specified and as directed by. Make : Legrand Cat No. 673304 or equivalent in Seimens/ Anchor Roma.
S & F sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 with metal double door, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, all as specified and as directed. Make : Legrand Cat No 507670 or equivalent in ABB/ Seimens.
S & F MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408683 ,ABB/Seimens
Taking down old unserviceable and Supply & Fix MCB TPN, 100 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand/ABB/C&S.
Taking down old unserviceable and Supply & Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507611 or equivalent in ABB/Seimens.
Taking down old unserviceable and Supply & Fix MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408617 or equivalent in ABB/Seimens.
Taking down old unserviceable and Supply & Fix MCB SP 10-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand or equivalent in ABB/Seimens
M & L for disconnecting electric supply, taking down fan, dismantling blades carefully after unscrewing nuts and bolts of ceiling fan, wall fan, exhaust fan of any make from existing position and bringing to AGE E/M store yard for repairs, overhauling, oiling, greasing and cleaning all dusts and rehanging in position and connecting up electrically including minor items like split pins complete all as specified and as directed by EIC. Note: Rewinding work and replacement of spares shall be measured and paid separately under appropriate items. No supporting materials, tools and plants shall be issued by MES to contractor.
M & L for Rewinding to ceiling/wall fan motor assembly complete with super enameled copper winding wire of suitable gauge for any make and any size of fan including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete.
S & replace ball bearing 6201/ 6202/ 6203 for 48 " (1200 mm ) sweep fan including taking down old unserviceable ball bearing complete all as specefied . Make : TATA/ SKF/ NBC
S & F capacitor 2.5 MFD, 240 Volts, including taking down old unserviceable all as specified and as directed. Make : EPCOS/Havells/Philips,
Carrying out following repairs to exhaust fan Metal Body of any make and size given below and testing complete all as specified and as directed
Rewinding to exhaust fan motor assembly complete with super enameled copper winding wire of suitable gauge for exhaust fan upto 12" (305 mm) sweep including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete.
S & F Fan Blade Metal body including frame and legs suitable for upto size 300 mm Ex fan
S & F exhaust fan motor metal body suitable for upto size 12" (305 mm Ex fan)
M/s Ashwin Bhange
M/s Prakash R. Verma
VIJ ASSOCIATES
Varsha G Nagphase
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .