Repairs To Certain Furniture Items At Shikargarh Area

Amount

Chair Dining (a) Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(e) Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Back Strip Taking down old u/s Back Strip and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

(h) Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

(j) Re-canning Re- canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Chair Writing (a) Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(e) Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Back Strip Taking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

(h) Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

(j) Re-canning Re- canning of Chair Writing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

(k) Arms Rest: Taking down old u/s Arms Rest and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Chair Easy (a) Rear Legs : Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs: Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rails of Seat: Taking down old u/s Side Rails of Seat and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Front/ Back Rails of seat : Taking down old u/s Front Rail of Seat and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(e) Side Rail Back: Taking down old u/s Side Rail of Back and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Top/Bottom Rail of Back: Taking down old u/s Top/Bottom of Back and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Front Support Rail : Taking down old u/s Front Support Rail and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(h) Shoes :- M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

(j ) Re-canning Re- canning of Chair CBA Wooden in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

(k) Arms Rest: Taking down old u/s Arms Rest and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Chair Dining Officer (a) Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(e) Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Back Strip Taking down old u/s Back Strip and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

(h) Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

(j) Removel of old cushion and Supply and fixing of new seat cusion of 75 mm thick 40 density complete with approved tepestry. Rate of tapestry should not be less than Rs 350/- per RM. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Bed Hard/Bed Newar (a) TOP : M&L shall be provided for replacement of worn out plywood top from Bed Hard/Bed Newar, S&F New Plywood top of 12 mm thick commercial, BWR grade ,ISI Marked confirming to IS-303 Make : Greenply/Archidply/Century in one piece, fixed with suitable screws complete, all as specified on drg and as directed by Engr-in-Charge.

(b) Long Rail : M &L for replacement of old broken long Rail made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per drg.

(c) Short Rail : Making out short Rail from old broken long rail (obtain from Item No 5 (b) here-in-before) and fix rest all as per drg.

(d) Legs : M &L for replacement of old broken legs made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per drg.

(e) Head Board : M & L for taking out all broken worn out component of head board and provide frame with IInd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM and Teak face ply one side and other side commercial ply BWR ISI Marked grade all as per drg.and as directed.

(f) Foot Board : M & L for taking out all broken worn out component of head board and provide frame with IInd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM and Teak face ply one side and other side commercial ply BWR ISI Marked grade all as per drg.and as directed.

(g) Middle Stiffner : M & L for replacement of old broken stiffener connecting of legs with new one made out teak wood., Rest all as per Drg.

(h) Steel bent clamp for corner :S &F MS clamp made out mild steel flat iron size 35 mm x 5 mm including 2 coats of synthetic enemel paint over a coat of redoxide primer.

Chair WBB (a) Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(b) Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(d) Seat Frame : Taking down old u/s Seat Frame and M&L for New Seat Frame made out of 12 mm thick commercial Plywood ISI Marked complete. All as specified in drg and as directed by Engr-in-Charge.

(e) Bottom Stiffener Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(f) Back Strip Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

(g) Shoes: M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

(a) Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 4 seater and S& F new front/ Rear leg of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(b) Side Back/Front Rail : Taking down old U/S Side back/Front Rail of sofa set 4 seater and S& F new Side back/Front Rail of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.

(c) Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 4 seater and S& F new batterns for seat/back of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(d) Arms : Taking down old U/S front/ Arms of sofa set 4 seater and S& F new Arms of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(e) Cushion for Seat : Removing of existing U/S cushion from seat of sofa set 4 seater and S & F new foam cushion 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

(f) Cushion for Back : -Ditto- All as per item No 24(e) here-in-avove but Cushion for Back.

(g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

(h) Cover Only for Sofa Set 4 Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

(a) Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 5 seater and S& F new front/ Rear leg of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(b) Back/Front Rail of 3 seater : Taking down old U/S Side back/Front Rail of sofa set 5 seater and S& F new Side back/Front Rail of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.

(c) Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 5 seater and S& F new batterns for seat/back of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(d) Arms : Taking down old U/S front/ Arms of sofa set 5 seater and S& F new Arms of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

(e) Cushion for Seat : Removing of existing U/S cushion from seat of sofa set 5 seater and S & F new foam cushion 95 to 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

(f) Cushion for Back : -Ditto- All as per item No 25(e) here-in-avove but Cushion for Back.

(g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

(h) Cover Only for Sofa Set 5 Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Side Board (a) Top : Taking down old u/s Top and M&L for New Top made out of 18/19mm Prelaminated Particle Board Exterior grade complete all as specified in drg and as directed by Engr-in-Charge.

(b) Legs : Taking down old u/s Leg and M&L for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

(c) Long Rail : Taking down old u/s Long Rail and M&L for New Long Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge..

(d) Short Rail : Taking down old u/s Short Rail and M&L for New Short Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

(e) Shutter : - M&L for removing old worn out shutter and supply and fixing new shutter made out of 18/19 mm Prelaminated Particle board exterior grade duly edging 5 mm thick teak wood beading after removing old UNSV edging . Rest all as per drg .

(f) Drawer : M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

(g) Side LT/RT Taking down old u/s Side LT/RT and M&L for New Side LT/RT made out of 18/19mm Prelaminated Particle Board Exterior grade complete all as specified in drg and as directed by Engr-in-Charge.

(h) Back :- M&L for removing old worn out Back from the Side Board and new Back made out of 6mm Plywood commercial BWR grade. Rest all as specified in the drg and as directed by Engr in Charge .

(j) Knob : M&L for taking out old worn out knob from the drawer of the table and SF new knob of best quality approved by GE/Engr-in-Charge. Rest all as specified or as directed by Engr in Charge.

Bin Soiled Linen (a) Top : M&L for removing old worn out top and new top made out of 18/19 mm prelaminated particle board exterior grade duly edging 5 MM thick teak wood beading after removing old UNSV edging. Rest all as specified in drg and as directed by Engr-in-Charge.

(b) Bottom : M & L for removing old worn out bottom from bins, S&F new Bottom made out of second class. Rest all as specified in drg and as directed by Engr - in -Charge.

(c) Back : M & L for removing old worn out back of the bins and new made out of 6 mm thick commercial plywood BWR Grade. Rest all as specified in drg and as directed by Engr - in -Charge.

(d) Side LT/RT Canning :- Side Canning of Bin in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning. Rest all as shown on drawing and as directed by the Eng - in - Charge.

(e) Side LT/RT SS Wire Mesh :- M&L for fixing of Side LT/RT with Galvanized SS woven wire mesh 0.46mm niminal dia 16 Mesh wide aperture 1.18mm conforming to IS : 1568/1970 including taking out old SS Wire Mesh. Rest all as shown on drawing and as directed by the Eng - in - Charge.

(f) Hinge :- Taking down old u/s Hinges and M&L for New Hinges ISI Marked size 75mm complete. Rest all as specified in drg and as directed by Engr-in-Charge

Stool Dressing (a) Leg : Taking down old u/s Leg and M&L for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

(b) Side Rail : Taking down old u/s Side Rail and M&L for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

(c) Stiffener : Taking down old u/s Stiffener and M&L for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

(d) Re-Canning : Side Canning of Stool Dressing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning. Rest all as shown on drawing and as directed by the Eng - in - Charge.

Table Dressing Ladies (a) Mirror : Removing of old/worn out U/S mirror and M & L for fixing new mirror 5 mm thick mirror ( Make : MODI GUARD/ATUL) as per size shown on drg & directed .

(b) Back ply of mirror :Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.

(c) Top : Removing UNSV from the mirror and new top made out of 18 mm thick pre laminated particle Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

(d) Bottom : Removing UNSV from the mirror and new Bootom made out of 18 mm thick pre laminated particle Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

(e) Drawer : M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

(f) Knob : M&L for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge.

(g) Legs : M&L for removing unservicable Legs from the table and SF new Legs made out of 2nd class H/W. Rest all as specified in the drg and as directed by Engr in Charge.

(h) Glass sliding shutter with alluminium channel : M&L for removing UNSV Glass sliding shutter with aluminium channel from table and S&F new Glass shutter made out of 4mm thick glass plain with aluminium channel 20 mm width. Rest all as specified in the drg and as directed by Engr in Charge.

Table Dressing Gents (a) Mirror :- Removing of old/worn out U/S mirror and M & L for fixing new mirror 5 mm thick mirror ( Make : MODI GUARD/ATUL) as per size shown on drg & directed .

(b) Back ply of mirror : Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.

(c) Top : Removing UNSV from the mirror and new top made out of 18 mm thick pre laminated particle Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

(d) Bottom : Removing UNSV from the mirror and new Bootom made out of 18 mm thick pre laminated particle Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

(e) Drawer : M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

(f) Knob : M&L for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge.

Table Wirting (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. all as per specfication in drg and directed by Engr in Charge.

(b) Legs : M& L for removing U/S legs from the table including supply and fixing new legs made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

(c) Long Rail : M& L for removing U/S long rail from the table including supply and fixing new long rail made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

(d) Short Rail : M& L for removing U/S short rail from the table including supply and fixing new short rail made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

(e) Central Stiffener : M& L for removing U/S stiffener from the table including supply and fixing new stiffener made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

(f) Drawer : Removing U/S old broken drawer and S & F new ,made out of teak wood well seasoned. All as shown on drawing , as specified and as directed by Engr-in-Charge.

(g) Store Box (Back) : Removing old u/s back side board and replace with 6mm thick (BWR) commercial ply.

(h) Store Box (Side) : Removing old u/s side and replace with 19mm thick block board teak veneer finish (One side).

(j) Small legs : - M& L for removing U/S legs from the table including supply and fixing new legs made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

(k ) Shutter : M& L for removing U/S shutter from the table and supply and fixing new shutter made out of 18/19 mm thick prelaminated particle board exterior grade duly edging with 5 mm teak wood beading all around the top complete. all as per specfication in drg and directed by Engr in Charge.

(l) Shoes : M & L for removing old/worn out rubber shoes with S & F new rubber shoe of superior quanlity with steel plated screws of suitable size complete all as directed by Engr-in-Charge

Teapoy (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(d) Stiffener : M&L for removing U/S Sstiffener S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Table centre (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(d) Stiffener : M&L for removing U/S Sstiffener S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Peg Table (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MFD board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(d) Stiffener : M&L for removing U/S Sstiffener S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Table dining 6 persons (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Table dining 8 perosns (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Table 3'X2' W/O Drawer (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(d) Stiffener : M&L for removing U/S Sstiffener S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Table 3'X2' With Drawer (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(d) Stiffener : M&L for removing U/S Sstiffener S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

(g) Drawer : Removing U/S old broken drawer and S/F new made out of 6mm plywood commercial BWR grade. Rest all as per specification given in the drawing and directed by Engr in Charge.

Table Bed Side (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

(b) Side LT/RT : M& L for removing U/S Side LT/RT from the table and supply and fixing new top made out of 18/19 mm thick prelaminated particle board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Table dining 1200x 900 (a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(d) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

(e) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Trestle store wooden (a) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned 2nd class hard wood complete all as specified and directed by Engr in Charge

(b) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned 2nd class hardwood complete all as specified and directed by Engr in Charge

(c) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned 2nd class hard wood complete all as specified and directed by Engr in Charge

(d) Scraping and removing of all dust and prepairing the surface of wood of trestle store and applying one coat creosote oil antitermite solution

Material and Labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with of approved quality french polish to glossy finish. The items are mentioned below (a) Chair Dining FD-279/203/16/262

All as per Srl Item No 166 above but Chair Writing FD/20/202/250/280

All as per Srl Item No 166 above but Chair Easy FD-229/201/17

All as per Srl Item No 166 above but Chair dining officer

All as per Srl Item No 166 above but Chair WBB FD-26/225/285

All as per Srl Item No 166 above but Bed Hard FD-246/245/247

All as per Srl Item No 166 above but Sofa Set 4 Seater FD-281

All as per Srl Item No 166 above but Sofa Set 5 Seater FD-281

All as per Srl Item No 166 above but Side Board FD-241/26

All as per Srl Item No 166 above but Bin Soiled Linen FD-244/15(m)/212

All as per Srl Item No 166 above but Stool Dressing FD-27/252/282

All as per Srl Item No 166 above but Table Dressing Ladies FD-251/32

All as per Srl Item No 166 above but Table Dressing Gents FD-230/231

All as per Srl Item No 166 above but Table Writing FD-249/275/33(m)

All as per Srl Item No 166 above but Teapoy FD-232/278

All as per Srl Item No 166 above but Table Centre FD-235/274

All as per Srl Item No 166 above but Table Peg FD-236/277

All as per Srl Item No 166 above but Table Dining 6 Persons FD-273/329

All as per Srl Item No 166 above but Table Dining 8 Persons FD-273/329

All as per Srl Item No 166 above but Table 3'x2' with out drawer FD-231/223/284

All as per Srl Item No 166 above but Table 3'x2' with drawers FD-231/223/283/284

All as per Srl Item No 166 above but Table bed side FD-236/276

All as per Srl Item No 166 above but Table dining 1200x900 FD/MAP-II/03

(a) M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

(b) M&L DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

(c) M&L LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

(d) M&L LOCKING DEVICE made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Locking Device, complete all as specified and as directed.

(e) M&L LOCK (MAKE : GODREJ) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Lock, complete all as specified and as directed.

(f) M&L Mild Steel HANDLE (as approved) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Handle, complete all as specified and as directed.

(g) M&L Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Hinge, complete all as specified and as directed.

(h) M&L preperation of old surfaces of ALMIRAH MED STEEL (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(a) M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

(b) M&L DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

(c) M&L LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

(d) M&L LOCKING DEVICE made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Locking Device, complete all as specified and as directed.

(e) M&L LOCK (MAKE : GODREJ) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Lock, complete all as specified and as directed.

(f) M&L Mild Steel HANDLE (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Handle, complete all as specified and as directed.

(g) M&L Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Hinge, complete all as specified and as directed.

(h) M&L preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-67 & FD-1031) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(a)M&L welding (full round of pipe as a one spot) of broken part of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

(b) M&L Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side or Rear Side of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Bar, complete all as specified and as directed.

(c) S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed.

(d) M&L Re-canning of CHAIR VERANDAH in Godrej pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out old/worn out Canning, complete all as specified and as directed.

(e) M&L removing/scrapping old worn out Paint from Steel Frame of CHAIR VERANDAH (Drawing No. FD-19, FD-256 & FD-259) by Sand Paper/Scrapper and applying One Coat of White Colour Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(a) M&L SEAT FRAME made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

(b) M&L BACK FRAME made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame, complete all as specified and as directed.

(c) M&L ARMS REST made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed.

(d) M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMS size 35x25x3 mm, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

(e) S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

(f) S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

(g) M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying one coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(a) M&L SEAT FRAME made out of Second Class Hardwood of CHAIR CB STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

(b) M&L BACK FRAME made out of Second Class Hardwood of CHAIR CBA STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame, complete all as specified and as directed.

(c) M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMS size 35x25x3 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

(d) S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

(e) S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

(f) M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(a) M&L TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 50 - 75 mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

(b) M&L CASTOR WHEEL (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed.

(c) M&L BOTTOM BASE (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.

(d) M&L GAS LIFTING HYDROLIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed.

M&L HANDLE of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

(a) M&L Moulded PVC/wooden saet and back of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed.

(b) M&L for Welding of Broken Leg with Mild Steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

(c) M&L removing/scrapping old worn out Paint from CHAIR SCHOOL WITH HAND BOARD (Drawing No. FD/E6/MAP/05/ FD-140/ FD-48) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(d) M&L welding (full round on pipe as a one spot) of broken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

(a) M&L TOP of TABLE OFFICE OFFICER STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Top, complete all as specified and as directed.

(b) M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed.

(c) M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener, complete all as specified and as directed.

(d) M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

(e) M&L LOCK (MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Lock, complete all as specified and as directed.

(f) M&L Mild Steel HANDLE of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Handle, complete all as specified and as directed.

(g) M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

(h) M&L removing/scrapping old worn out Paint from TABLE OFFICE OFFICER STEEL (Drawing No. FD-84 & FD-1003) by Sand Paper/Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(a) M&L TOP of TABLE OFFICE CLERK STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Top, complete all as specified and as directed.

(b) M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed.

(c) M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener, complete all as specified and as directed.

(d) M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

(e) M&L LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Lock, complete all as specified and as directed.

(f) M&L Mild Steel HANDLE of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Handle, complete all as specified and as directed.

(g) M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

(h) M&L removing/scrapping old worn out Paint from TABLE OFFICE CLERK STEEL (Drawing No. FD-84, FD-381 & FD-1004) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(a) M&L TOP of TABLE 3'X2' WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1007 including taking out unserviceable Top, complete all as specified and as directed.

(b) M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Central Stiffener, complete all as specified and as directed.

(c) M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

(d) M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH OUT DRAWER as shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

(e) M&L removing/scrapping old worn out Paint from TABLE 3'X2' WITH OUT DRAWER (Drawing No. FD-1007) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(a) M&L TOP of TABLE 3'X2' WITH DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1008 including taking out unserviceable Top, complete all as specified and as directed.

(b) M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer, complete all as specified and as directed.

(c) M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unservice-able Central Stiffener, complete all as specified and as directed.

(d) M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener, complete all as specified and as directed.

(e) M&L LOCK (MAKE : GODREJ) of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Lock, complete all as specified and as directed.

(f) M&L Mild Steel HANDLE of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Handle, complete all as specified and as directed.

(g) M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

(h) M&L removing/scrapping old worn out Paint from TABLE 3'X2' WITH DRAWER (Drawing No. FD-1008) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(a) M&L TOP of TABLE DINING ORS of Block board Board 18/19 mm thick with 22 guage aluminium sheet (MAKE : GREEN PLY/CENTURY), shown on Drawing No. FD-165(M) including taking out unserviceable Top, complete all as specified and as directed.

(b) M&L Mild Steel Square Pipe of size 20mm, 1.6mm thick as LEG having length from 300mm to 500mm and fixing/ welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

(c) M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Long Rail, complete all as specified and as directed.

(d) M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Short Rail, complete all as specified and as directed.

(e) M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffner, complete all as specified and as directed.

(f) M&L Mild Steel Square Pipe of size 25mm, 1.6mm thick as CENTRAL STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffner, complete all as specified and as directed.

(g) M&L Complete removing/scrapping old worn out Paint from TABLE DINING ORS (Drawing No. FD-165(M) by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

(a) M&L Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing No. FD/MAP-II/01 including taking out unserviceable Plywood Top, complete all as specified and as directed.

(b) M&L MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

(c) M&L Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

(d) M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYWOOD TOP (Drawing No. FD/MAP-II/01 by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

(a) M&L SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

(b) M&L DOOR made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

(c) M&L LEG made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

(d) M&L aluminum HASP & STAPPLE of size 100mm for LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hasp & Stapple, complete all as specified and as directed.

(e) M&L Mild Steel HANDLE (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed.

(f) M&L Mild Steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed.

(g) M&L Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

(a) M&L SHELF made out of 1.0mm thick Mild Steel Sheet of RACK 6 TIER STEEL and made to shape and size as shown on Drawing No. FD-106 & FD-1038, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

(b) Taking out unservisiable ANGLE IRON and supply & fixing new angle iron fo size 40x40x4 mm for FD-1038 and 30x30x3mm for FD-106 of RACK 6 TIER STEEL as shown on Drawing, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

(c) M&L Complete removing/scrapping old worn out Paint from RACK 6 TIER STEEL (Drawing No. FD-106 & FD-1038) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

(a) M&L welding (full round of angle as a one spot) of broken part of TRESTLE STORE STEEL as shown on Drawing No. FD-1043, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (Black Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer , complete all as specified and as directed.

(b) M&L Complete removing/scrapping old worn out Paint from TRESTLE STORE STEEL (Drawing No. FD-1043) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

(a) M&L TOP of TABLE 3'X3' WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1009 including taking out unserviceable Top, complete all as specified and as directed.

(b) M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X3' WITH OUT DRAWER as shown on Drawing No. FD-1009, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

(c) M&L removing/scrapping old worn out Paint from TABLE 3'X3' WITH OUT DRAWER (Drawing No. FD-1009) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(d) M&L welding (full round on pipe as a one spot) of broken part of TABLE 3'X3' STEEL as shown on Drawing No. FD-1009, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

(a) M&L HEAD SIDE BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Head Side Board, complete all as specified and as directed.

(b) M&L FOOT REST BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Foot Rest Board, complete all as specified and as directed.

(c) M&L Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to BED HARD MS TUBING as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Plywood Top, complete all as specified and as directed.

(d) M&L MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

(e) M&L Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

(f) M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of BED HARD MS TUBING (Drawing No. FD/E6/MAP/08R by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

(a) M&L SEAT of FORM WITH BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing No. FD-78 including taking out unserviceable seat, complete all as specified and as directed.

(b) M&L BACK of FORM WITH BACK made of single plank of teak wood of size 1800x150x19mm as shown on Drawing No. FD-78 including taking out unserviceable seat, complete all as specified and as directed.

(c) M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITH BACK as shown on Drawing No. FD-78 necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

(d) M&L removing/scrapping old worn out Paint from FORM WITH BACK (Drawing No. FD-78) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(e) M&L welding (full round on pipe as a one spot) of broken part of FORM WITH BACK as shown on Drawing No. FD-78, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

(a) M&L SEAT of FORM WITHOUT BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing No. FD-77/ FD-1027 including taking out unserviceable seat, complete all as specified and as directed.

(b) M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITHOUT BACK as shown on Drawing No. FD-77 / FD-1027 necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

(c) M&L removing/scrapping old worn out Paint from FORM WITHOUT BACK (Drawing No. FD-7&/ FD-1027) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(d) M&L welding (full round on pipe as a one spot) of broken part of FORM WITHOUT BACK as shown on Drawing No. FD-77/ FD-1027 rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

(a) M&L TOP of TEAPOY VARANDHA of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD/E6/MAP/18 or FD- 255 including taking out unserviceable Top, complete all as specified and as directed.

(b) M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VARANDHA as shown on Drawing No. FD/E6/MAP/18 and FD-1009, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

(c) M&L removing/scrapping old worn out Paint from TEAPOY VARANDHA (Drawing No. FD/E6/MAP/18 and FD-255) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

(d) M&L welding (full round on pipe as a one spot) of broken part of TEAPOY as shown on Drawing No. FD/E6/MAP/18 and FD-255, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

(a) M&L TOP of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

(b) M&L Side / Back of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable side/back, complete all as specified and as directed.

(c) M&L UPPER DRAWER of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable Upper drawer, complete all as specified and as directed.

(d) M&L LOWER DRAWER of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED) as shown on Drawing including taking out unserviceable lower drawer, complete all as specified and as directed.

(e) M&L LEG of TABLE BED SIDE of MS squre pipe 25x25 mm x 1.6 mm as shown on Drawing including taking out unserviceable leg, complete all as specified and as directed.

(a) M&L welding (full round on pipe as a one spot) of broken part of RACK SHOE as shown on Drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

(b) M&L TOP of TABLE COMPUTER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

(c) M&L DRAWER made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED) and fixing to TABLE COMPUTER as shown on Drawing , including taking out unserviceable Drawer, complete all as specified and as directed.

(d) M&L LOCK (MAKE : GODREJ) of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed.

(e) M&L Mild Steel HANDLE of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.

(f) S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

M/S CHANDER SHEKHAR

SK INDUSTRIES

Shri Maruti Trading Co.