Renovation of Chamber Hall and Renovation of Director Chamber, Conference Room in RINPAS Kanke, Ranchi

Amount

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.(8mm dia )

(a) (8mm dia ) (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(b) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(c) 12mm to 16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.15mm thickess after scrapping and propperly cleanig the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicoe additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.

With "A" grade white 15X15cm Tiles.

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt)

Providing two coats of synthetic enamel paint over a coat of red oxidized paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.E/l.

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing and Fixing factory made uPVC white colour sliding glzed window upto 1.5m in height dimension comprising of UPVC multi-chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanised steel section made from roll forming process of required length (shape & size according to UPVC profile) appropriate dimension of UPVC extruded glazeing beads and UPVC extruded interlocks,EPDM gasket,wood pile,zinc alloy(white powder coataed)touch locks with hook,zinc alloy body with single nylon rollers(weight bearing capacity to be 40kg)G.I.fastyeners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc profile of frame & sash hall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealelnt over backer rod of required size and of approved quality,all completeas per approved drawing & direction of E/I.(single/double galss panes,wire mesh and silicon sealant shall be lpaid separately) Note_For UPVC frame and sash extruded profiles minus 5% tolerance indimension i.e.indepth & width of profile shall be acceptable.Three track three panels sliding windows with fly proof S.S.wire mesh( two nos,glazed & one no wire mesh panels ) made of (big series) frame 116x45mm& sash 46x62mm both having wall thickness of 2.3±0.2mm and single glazing bead/double glazing bead of appropriate dimension.(area of window above 1.75sqm)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0mm thickness(weight not less than 10kg/sqm)

Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 15 % perforated area withperforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, withll 4 side tapered and backed by acoustical tissue withNRC value not less than 0.60

Providing and laying polished vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles including all complete.(size 600x1200mm)

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing and fixing plain lining with necessary screws,nuts & bolts,nails,including a coat of approved primer on one face,and fixed on wooden/steel frame work,complete as per direction of E/I.12mm thick commercial ply conforming to IS:1328 BWR type including all complete job.as per direction of E/I.

Providing and fixing 4 mm thick coir veneer boaard,ISI maraked IS: 14842,plain lining with necessary screws,priming coat on unexposed surface etc.complete.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below.

1.The surface to be polished in rubbed with sand paper 80/120 no and then with sand paper of 160/180nos

2-Applying two coats of sealer with spray gun and allowing sufficient drying time for Ist coat and 2nd coat is allwed to dry for 8 to 12 hrs

3-On drying of sealer coat,wet rubbing with emery cloth of finer grading with ample wataer to rremove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allwed todry for 12hrs.

4.On this ,Ist coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in rerquired kproportion.This Ist coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,which is further allowed to dry for 12 hrs.The final melamine polish is applieid with compressor pressure spray gun using melamine clear polish kand melamine thinneer mixed is required proportion complete as per direction of Engineer-in-charge.(Final coat to be done in 1 or 2 layers without gap of time)

Providing and fixing wooden Moulded bending to door and windows rame with iron screw,plugs and priming coat on unexposeded surface etc.including all complete job as per direction of E//I 2nd class teak wood 50x20mm

Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc complete as per direction of E/I.(200 mm)

Providing and fixing bright finished brass butt hinges with necessary screws etc size 100x85x5.5mm(heavy type) including all complete job.

Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete 200x10mm

Provding and fixing bright finished brass 100mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc complete job.

Providing and fixing alumiunum work for door ,windows ,ventilators and partitions with extruded built up standard tubular sections, appropriate z sections and other sections of approved make conforming to IS:733 and IS:1285,fixed with dash fasteners of required dia and size including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight ,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws .all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and paneling to be paid for separately) Anodised aluminium (anodised transparent or dyed to requireid shade according to IS:1868,Minimum anodic coating of grade AC 15)

Providing and fixing 19 mm thick both side blancing lamination factory pressed BWP grade marine ply as per IS 710 of appro ed brand boxes,shelves,racks,almirah,cupboard and drawer etc including necessary nails,screws etc compelte as per direction of E/I.

Providing and fixing decoravtive high pressue laminated sheet of plain/wood grain in glose/matt,suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S,including cost of adhesive of approved quality including all complete job as per direction of E/I.1.0mm thick

Providing and fiaxing magnetic catcher of approved quality in cuupboard/ward robe shutters,including fixing with necessary screws etc complete job.(Triple strip veertical type

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500mm long with screews etc.complete as peer direction of E/I.

Providing and fixing bright/matt finished stainless steel handles of approved quality & make with necessaryscrews etc all complete job. 125mm thick

Providing and fixing bright finished brass butt hinges with necessary screws etc size 75x64x4mm(heavy type) including all complete job.

Providing &fixing of 25mm thick second class Teak wooden flooring of anti termite water Proof ply including fixing with foam,favicol etc as per direction of E/I.

Providing and fixing floor mounted,white vitreous china single piece,double traps syphonic water closet of approved brand/make ,shape ,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system,including all fittings and ixtures with sat cover,cistern fittings nuuts,bolts and gasket etc including making connection with the existing P/S trap,complete in all respect as per direction of E/I.

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

S/F/F VIP Bath room fitting including all complete job as per direction of E/I.

Bib cock (Long tahread)

Angular stop cock

Mirror of 6mm thick 600x450mm

pillar cock long neck

wall mixer withtelephonic shower arrangement

Glass shelf 22"

soap dish

Towel Rail 24"

100 mm dia steel Jali

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Concealeld work)

20mm dianominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (PVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings..This included jointing of the pipes & fittings with one step CPVC solvent cement trencing,refilling & testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(External work)

25mm dianominal dia pipes

32mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

75mm dia

Providing and fixing on wall face unplasticised PVC pipe clips moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

110mm dia

Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI 12701 marketed with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fillings and the base supported for tank.

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossed onthe body, door weight upto 35 kg and door width upto 700 mm), withnecessary accessories and screws etc. complete.ing and fixing bright finished brass hanging type floor door stopperwith necessary screws, etc. completeiding and fixing bright finished brass handles with screws etc.compelte. (125mm)

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantlingtile work in floors and roofs laid in cement mortar including stacking material with in 50 metres lead for thickness of tiles 10mm to 25mm including all complete job as per direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Supplying, fitting and fixing 38mm , thick good quality well dressed and well seasoned sal wood 1/3rd glazed and 2/3 paneled shutter in doors and window with 25mm thick panels with one side plain and other side chamfered with aluminium fittings such as hinges, sliding doors boltes tower bolts handles or rings, hooks and eyes, cleats, sand blocks as per schedule and 3mm thick plain glass panes fitted with sal wood beads and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facials and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels.(Green marble)

Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Couplar 75mm dia

Coupler 110mm dia

Single pushfit coupler 75mm dia

Single pushfit coupler 110mm dia

Single Tee with door

75mm dia

shoe(plain)

75mm dia

110mm dia

Taking down ceiling (any type) and refixing them after repair with department material, within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

local sand lead 3K.M

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with Modular type switchmodular plate, Suitable size G.I Box etc. as required.

Group A

Twin control point wiring in PVC conduit withModular type switch-wiring for Twin control light point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit 2 way Moodular type switch,Modular plate,suitable size G.I.boax and earthing the point with 1.5 sqmm.FRPVC insulated copper conductor single core cable etc as required.

Wiring for circuit/submain wiring along with wiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire

2x2.5sqmm+1x2.5sqmm earth wire

2 x 4 sq mm +1 x 4 dsq mm earth wire

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 3pin 5/6 Amp socket outlet and 5/6 amp. Piano type switch connection as painting etc. as req.

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 6 pin 15/16 Amp socket outlet and 15/16 amp. Piano type switch connection as painting etc. as req.

Supplying and fiaxing suitable size G.I.box with modular plate cover in tahe front on surface or in recess including providing and fixing 15/16 amps sitch,connections painting etc as required( for AC)15/16amps,6pin socket outlet

Supplying and fiaxing suitable size G.I.box with modular plate cover in tahe front on surface or in recess including providing and fixing 15/16 amps sitch,connections painting etc as required( for AC)15/16 amps,one way switch

S/F”C” series SPMCB: supplying and fixing 6 amps to 32amps rating,240 volts ,10KA,"C" curve, ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 amps , single pole

40 amps, TPN

50/63 amps TPN

S/F Modular type switch/socket supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connections but excluding modular plaate etc as reqd.

5/6 Amps 3pin 5/6 Amp socket

5/6 amps,3 socket outlet

sUPPLYING AND FIXING MODULAR BLAMKING PLATE ON THE EXISTING MODULAR PLATAE & SWITCH BOX EXCLUDING MODULAR PLATE AS REQUIRED.

Supplying and fixing the following way,horizontal type three pole and netural, steel M.C.B.ditrubutionbaord,415volts, on surface/recess, complete with tinned copper busbar, neutral bus bar, earth bar,din bar, interconnection powder painted including earthing etc as required ( butwithout MCB/RCCB/Insolator)

4way(4+12) Double door,Horizontal type

Supplying and drawing following sizes of FRPVC insulated copper conductor,single core cable in the existing surface/recessed steel/PVC conduit as required.

3x1.5 sqmm

Supplying anf dixing of following sizie of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/pvc conduit as required.

1 run of cable

2 run of cable

3 run of cable

Laying of one number PVC insulated and PVC sheathed/XLLPE power cable of 1.1KV grade of following size on wall surface as required.

Upto35sqmm (clamped with 1mm thick saddle)

Above 35 sqmm and upto 95 sqmm (clamped with MS flat clamp)

S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required

18/20 W LED Round Down light

6/7 W LED Round Down light

Recess Mounting LED panel Light 2x2(36W) including all complete job as per direction of E/I.

Supply of wall mounted Fan 16"(400mm) including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

Installation testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types,complete with all accessoreis and tube etc. directly /wall including connection with 1.5 sqmm FRPVC insulated,copper conductor,single core cable and kearthing etc as required.

Erection of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting complete with all accessoreis including connection etc as requried.

S/F 2 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd

Supplying and fitting fixing ROLLER Blind including all complete job as per direction of E/I.

Suppling fitting and fixing of JHARKHAND LOGO WITH METAL AND PLATE including all complete job.

Suppling fitting and fixing of VIPName plate with Metal and plate including all complete job.

Supplying fitting and fixing split type air conditioners kcapicity 2.00tr 5 star spilit AC(inverter type)IS 1391 including all complete job

Providing and fixing wall paper of decorative approved design as per direction of E/I. inclouding cost of wall paper,adhesive,labour and scaffolding all complete as per direction of E/I.

Supplying of Durian revolving chair with ARM central tilt synchronic Model no nature 1/MB,Product id 5116877-90460414888 including all complete job.

Supplying of Durian revolving chair with ARM 360 Degree swivel,posture control with multilocking position synchronized mechanism (ZEUS HIGH BACK),Product id 5116877-59576967395 including all complete job.

Supplying of Directors desk Durian 2100mmx900mmx750mm (DWS/34755/A) Model no nature 1/MB,Product id 5116877-38567201037 including all complete job.

Supplying fitting and fixing Conference table with corian Marble size 4500x1800x750mm including all complete job.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

Rajendra Kumar Singh

M/S MANOJ KUMAR PANDEY

M/S Raman Construction