Loading
Loading…
Loading…
Tender ID
Tender Value
Refer Docs
Closing Date
5 May 2026, 3:00 pmClosed
Single Packet
Normal Tender
No
Total Value Wise
Lowest to Highest
CONSIGNEE
Not Applicable
Expenditure
General
PUR
1 condition
Offers from the firms, which do not have a valid GSTIN will not be entertained. Firm has to submit their GST registration details.
24 conditions · 1 needing a document upload
The bidder confirms that Rates and other financial terms quoted in relevant column of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. [Denial of this condition not recommended].
The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the DMRC tender.
The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS conditions of Contract and [or] special Conditions and [or] other Conditions specified/attached with the tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Bidder has to submit the certificate for compliance of restrictions in regard to procurement from bidders from countries sharing land borders with India (as per Annexure attached).
Compliance of Make In India Policy:- (1). Where sufficient local capacity is available: Under make in India policy of GOI where sufficient local capacity is available for the tendered items, offer with local contents less than 60% shall be summarily rejected without giving any reason. (2). Where sufficient local capacity is not available: (i) As per make in India policy of GOI where sufficient local capacity is not available for the tendered items, offers with local contents less than 20% shall be summarily rejected and will not be evaluated for further decision. (ii) As per make in India policy of GOI offers with local contents more than 60% shall be given purchase preference (margin of purchase preference will be 20%).
GST and Discount should be quoted separately. Offers will be evaluated inclusive of all taxes quoted by the firm.
2 conditions
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.
2 locations across Tamil Nadu · 360 Numbers · 49 Set total
Procurement of Tools for E&M Department CMRL PH-II Works
ENM13008735
ENM13008735
Limited - Indigenous
Goods
Tamil Nadu
₹0
Exempted
5 May 2026
21 Apr 2026
47 items · 360 Numbers · 49 Set total
DIGITAL LUX METER Measuring range up to 20,000 lux or foot candles Make: Fluke 941 /Lutron or equivalent standard make with same specification ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
Digital Infrared Thermometer Temperature range: -30°C to 500°C Make: Fluke/Testo/A Z with one year callibration certificate ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
VERNIER CALLIPER (DIGITAL) 300mm Make: Mitutoyo Japan/Scienceware/Bosch/Insize ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 1.00 Numbers |
| Total | 1 Numbers | |
DIGITAL MULTIMETER ( MAKE :-MECO & FLUKE)1000V AC/DC; 10A AC/DC resistance to 50 M; Make:- Kusam-Meco, Fluke ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Sound Meter, Ranges, 30 to 130 db MAKE :-LUTRON SL 4030 or equivalent ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
Tong tester (Clamp Meter)30 mm Jaw size, Current AC/DC 1000A, Resistance:1000 kO hm, Voltage AC:600V;DC:1000V Make :HTC or equivalent ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
DIGITAL INSULATION TESTER From 0.1 M ohm -600Mohm, Insulation test voltages 500 V, 1000 V, Make-Fluke or equivalent ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
CLAMP TYPE DIGITAL EARTH TESTER Range of Measurement : 0.01 Ohm - 15000 ohm, Clamp Jaw Size: Long clamp 65 mm x 32 mm Resitance Resolution : 0.001 ohm Current Range : 0.00 mA -35.0 A Current Reolution : 0.05 mA. Protection : Double Insulation, Display : 4-Bit LCD digital dis play, Structure : Clamp CT Shift : Automatic Shift, Working Temperature & Humidity : -20 degree Cel cius - 55 Degree Celcius: 10% RH - 90 % RH Make: Fluke / Metravi ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
DIGITAL ANEMOMETER (MAKE :- Testo 410-2 or similar) ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 1.00 Numbers |
| Total | 1 Numbers | |
SAFETY GOGGLES ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 30.00 Numbers |
| Total | 30 Numbers | |
Hand Gloves,heavy duty rubberised ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 60.00 Numbers |
| Total | 60 Numbers | |
Full Body Harness (Safety Belt) ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
LED Torch Rechargeable Ascentech Hand Held Search Light, Type-LED 15 Watt, Brand: Ascentech, Model: AT_HHSL_15 or Equivalent ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Heavy Duty Screw Driver -1018, Make: Taparia/Jhalani/Deneers ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
HIRA 1.25 MM THICK FLEXIBLE BLADE TYPE B, HIRA 1.25MM Thick flexible blade type B Hacksaw frame with blade 300mm ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Flat file 6" with rubber grip handle, Width of file- 10-12 mm Length of file- 250-350 m m confirmity of ISO 9001:2016 & IS std- IS 4595:1969 Warranty- min 1 year ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Hammer Drill machine HILTI,GBH2-26DRE ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
CLAW Hammer (500 gm) ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Tool Kit, 51 pcs 1/4"" Drive Socket set Make: Toptul/Gedore/Snap-on. ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Set |
| Total | 5 Set | |
COMBINATION PLIER LENGTH :-210 MM make: TAPARIA/JHALANI ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
LONG NOSE PLIER, Make-Taparia/Jhalani/Deneers ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
10 Pc Multi Bit SCREW DRIVER ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Set |
| Total | 5 Set | |
TOOL KIT BOSCH 108 PIECE, Household tool kit ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Set |
| Total | 5 Set | |
WIRE CUTTER/STRIPPER, Make - Taparia/Jhalani/Deneers ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
D-Spanner set(6-32) Make: Taparia/Jhalani/Deneers ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Set |
| Total | 5 Set | |
RING SPANNER SET (6-32) Make :Taparia/Jhalani/Deneers ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Set |
| Total | 5 Set | |
PIPE WRENCH HEAVY DUTY ""Pipe wrench heavy duty. Nominal size of pipe wrench-35 0 mm. Minimum Jaw thickness of pip wrench-11 mm.Maximum capacity of pipe wrench-63 mm.Weig ht-1600-1650 gm.Maximum hardness of shank of movable jaw-265- 400 HV,. Material for handle-Mall eable cast iron. Material of spring- Steel. Material for movable and heel jaw-forging steel.Confirmity t o to standards-IS:4003(Part 2)-1986 for heavy duty pipe wrench with latest amendment. Warranty m inimum 1 year. ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 4.00 Numbers |
| Total | 4 Numbers | |
HAND AIR BLOWER Make : Stanley STPT-600 or equivalent ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Crimping Tools, Size: 0.5 - 6 Sqmm, Model No. CTI-6 ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Pedestal Fan 400 mm. Pedestal Fan 400 mm. LNO3 BLDC Pedestal Fan 400mm . Swee p Size: 400mm - Motor Type : BLDC Fan - Voltage Range: 165-285 VAC - Service Value: Minimum 2,2 - Air Delivery: 76 CMM . RPM: 1500 - Wattage: 35W - Noise Level: 56dB - Speed Control: Compatible with Remote - Class of Insulation: - Temperature rise in Motor Winding: < 65°C Bearing: Deep Groove Double Sided Steel Shielding - Ribs in Grill assembly: approx. 128 nos . Motor winding: Copper . Mini mum threshold BEE rating: 5 Star - Material of Winding: Copper - Type ofBearing: Double Ball bearin g - Material of Fan Blades: Integrated ABS Plastic Blades with 3 Leafs - Colour: White - IS Rating: IS 1 169:1967 +Amd. - ISI Marked: YES - Speed regulator: with both a remote and a manual pull-cord (thr ead) - Warranty: 2 years - Make: Atomberg, Havells, Crompton Greaves, Bajaj, Usha, Orient or any ot her reputed make - Supplier shall submit Test certificates as per IS Standard from NABL accredited la b ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Line Tester 814 Taparia or similar ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 10.00 Numbers |
| Total | 10 Numbers | |
ALLEN KEY SET ""Shape- Hexagonal, Size- 1.5 to 10 mm,Material - Chrom vanadium st eel, Length of Long arm- 200 mm, Short arm- 25 mm, IS std - IS 3082-1988, Warranty - Min 1 year ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Set |
| Total | 5 Set | |
VACUUM CLEANER GAS -15 BOSCH/FORBES ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
DIGITAL VIBRATION METER (Make: FLUKE, HTC) Acceleration 10Hz-1KHz (Mode1) 0.1 2 00 m/s² 0.3 200ft/s² 10Hz-10KHz (Mode 10) 0.3-200ft/ms² 0.3-1312ft/ms² Velocity 10Hz-1KHz 0.01 40 cm/s 0.000 16.00 inch/s True RMS 0.004-16.0 inch Displacement 10Hz-1KHz 0.001 4mm 0.04-160 mi l RPM (revolution) : 60 99,990r/min Frequency : 1 20 KHz Make: HTC VB-8205 /LUTRON 8201HA or e quivalent standard make with same specification. ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 1.00 Numbers |
| Total | 1 Numbers | |
Ratcheting Type Torque Wrench Head Style: Fixed with ratchet lever for changing dire ction OR with interchangeable mushroom head with ball locking device for changing direction Square Drive Size: 3/8 inch Square Drive Material: Chrome-Molybdenum Steel Alloy Torque Range: 10-50 Nm Fine Scale Increment Range: 0.25-0.5 Nm Overall Length Range: 330-430 mm Accuracy: +/-4% or b etter Bi-directional or Dual way direction click type Weight Range: 0.5-1.2 kg Ergonomically shaped g rip handle with sturdy body Adjusting Ring Locking System Clearly audible click sound on reaching th e required torque Each unit should be individually serial numbered & should include calibration certifi cate. Groz Part No. TQW/RT/3-8/50 OR Gedore Part No. 1545140 OR Stanley Part No. STMT73588-8. Make: Groz/Gedore/Snap-On/Stanley ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Aluminum stool/ A type ladder 6 feet height ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 19.00 Numbers |
| Total | 19 Numbers | |
Aluminum stool/ A type ladder 12 feet h ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 19.00 Numbers |
| Total | 19 Numbers | |
PORTABLE DIGITAL WEIGHING MACHINE (Briefcase type) Anti-slip mat panel for easy r efill or recovery specified value of refrigerant. Specification : Weighting range: 100 kg Resolution: 5 g Accuracy: ±0,05 % Display: LCD Power: DC 9 V Operating temperature range: -10 to 40 degree C Op erating humidity range: 75 % humidity Platform size: 237 x 237 mm Weight: 5,0 kg MAKE: Value /Rot henberger MODEL: VES-100A OR Rothenberger OR equivalant with same specification. ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
HAND GRINDER, 1000W, Make: Bosch/Stanley ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
ADJUSTABLE WRENCH Make:Taparia/Jhalani/Deneers ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
"TARPAULIN Specification:- a) Number of Eyelets:-14 b) Dimension:-4 x3.5 Mtr(LxB). c) Type:-200 gm/SqMtr. d) Colour:-Blue. e) Material of Eyelets:-Aluminiumpassivated. f) Eyelet fixing:-Al l Eyelets shall be provided with a reinforcement piece. g) Size of eyelets:-Size 28 as per IS 4084. h) T ype of Material:- HDPE. i) BIS Specs:-IS 7903 2017." ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 40.00 Numbers |
| Total | 40 Numbers | |
TARPAULIN, Heavy Duty, Multi Layered, Specification:- a) Number of Eyelets:-08 b) Di mension:-7.5 x 5.5 Mtr(LxB). c) Type:-250 gm/SqMtr. d) Colour:-Blue. e) Material of Eyelets:-Brass. f) Eyelet fixing:-All Eyelets shall be provided with a reinforcement piece. g) Size of eyelets:-Size 30 as per IS 4084. h) Type of Material:- HN- Heavy duty. i) BIS Specs:- IS 14611 2016 Latest. ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 40.00 Numbers |
| Total | 40 Numbers | |
Tachometer, Optical (non-contact) (Range - 1 to 99999 RPM) Make: Line Seiki-TM 5000 EK/Fluke 931 or equivalent standard make with same specification ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 1.00 Numbers |
| Total | 1 Numbers | |
KEY BOX FOR 40 KEYS ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 19.00 Set |
| Total | 19 Set | |
"1 Phase Portable Submersible Sump Pump 1.0 HP, 240 V, Make: Cropmton/KSB or equ ivalent." ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
EXTENSION CORD 16 A, 4 WAY WITH ON/OFF, MAKE : ANCHOR ROMA OR SIMILAR ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 20.00 Numbers |
| Total | 20 Numbers | |
TOOL BAGS ]
| Delivery Location | State | Quantity |
|---|---|---|
| AM/E&M | Tamil Nadu | 5.00 Numbers |
| Total | 5 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-ALandborder.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .