SPECIAL REPAIR TO HELIDROME NAGROTA AVIATION BASE AT NAGROTA MILITARY STATION UNDER GE NAGROTA

Amount

M&L for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc.of black top surface and applying tack coat of bituminious primer @ 5kg/10sqm complete all as specified and directed.

M&L for applying tack coat of bituminious primer @ 2kg/10sqm all as specified and directed

M&L for bituminous premix asphaltic dense concrete 40mm consolidated thickness with 6% binder content using polymer modified bitumen (PMB 40E) by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed.

M&L for bituminous premix asphaltic dense concrete 25mm consolidated thickness with 6% binder content using polymer modified bitumen (PMB 40E) by weight of total mix, rolled and compacted to required camber and gradient complete as correction course all as specified.

Demolition of cement concrete exceeding 15cm thickness of any description and in any position not otherwise specifically provided for, complete all as spd and directed

M & L for premixed bituminious macadam with 4% of binder content by weight of total mix using paving bitumen VG-30 laid with self propelling mechanical paver, rolled & compacted to required gradient and camber (consolidated thickness upto maximum 75 mm) to make good the cut edges of roads etc complete all as specified and directed by Engineer-in-charge.

M&L for cement concrete work in pavement/hard standing of flexural strength 40kg/sqcm in field using 400 kg of cement per cum, thickness of concrete 25cm or less complete all as specified and directed.

S&F shear dowel bars in sub floor with and including epoxy adhesive as per sample approved by GE including drilling holes in concrete for fixing dowel bars complete all as specified and as directed by Engr-In-Charge.

M&L for two coats of synthetic enamel paint over a coat of priming paint including preparation of surface on concrete surface

Material and labour for painting lines, dashes, arrow letters etc. on road pavements and the like exceeding 10cm width with road marking paint white or golden yellow including preparation of the surface complete all as

Removing demolished material exceeding 250m but not exceeding 500m and depositing where directed at a level n exceeding 1.5 m above the starting point

M&L for forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' in 250mm thick slab complete all as specified and directed. Note:- The quoted rate is deemed to include any extra formwork if required to form joints.

M&L for forming contraction (dummy) joints 65mm deep x 10mm wide, filled with grade A sealing compound complete all as specified and directed. Note:- The quoted rate is deemed to include any extra formwork if required to form joints.

M&L for finishing surface of concrete pavement by belting and brooming complete all as specified and directed

M&L for rounding edges of concrete not exceeding 10mm radius with an edging tool complete all as specified and directed.

s s construction

Sarbat Construction Co

M/S MOHAN LAL GUPTA

DES RAJ NAGPAL CONTRACTORS PVT.LTD