Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Jitender Singh, IDSE, EE
GE (N) Bathinda
INTEGRATED RESTORATION AND UPKEEP OF TOILET, SANITARY FITTING, PLUMBING JOINERY BUILDING, HARDWARE AND CONNECTED WORK IN JCOS/OR MD ACCN OF LEFT SIDE OF VIKRAM BATRA ROAD UNDER AOR OF AGE B/R-III OF GE (NORTH) BATHINDA AT BATHINDA MIL STN
2026_MES_799588_1
8941/NIT-60/26-27/E8
Open Tender
Civil Works
Item Rate
180 days
Bathinda
Class D Category a(i)
8 documents required · 8 mandatory
₹500
GE (N) Bathinda
₹99,000
Yes
20 Nov 2026
20 Nov 2026
7 Dec 2026
20 Nov 2026
4 Dec 2026
27 Nov 2026
20 Nov 2026 - 26 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down existing door/window chowkhats or frames complete with shutters, without removing the shutters from the frames, each having an area not exceeding 1.50 sqm, including dismantling, cutting and removing the existing rusted holdfasts from masonry/concrete surfaces, cutting necessary holes for removal of old holdfasts, making good and preparing the surfaces for fixing new holdfasts, removing the dismantled frames with shutters from the site and disposing of the materials as directed by the Engineer-in-Charge, complete all as specified and as directed by the Engineer-in-Charge. | 50 | Each | - | - |
| 2 | Taking down existing door/window chowkhats or frames complete with shutters, without removing the shutters from the frames, each having an area exceeding 1.50 sqm but not exceeding 4.00 sqm, including dismantling, cutting and removing existing rusted holdfasts from masonry/concrete surfaces, cutting necessary holes for removal of old holdfasts, making good and preparing the surfaces for fixing new holdfasts, removing the dismantled frames with shutters from the site and disposing of the materials as directed by the Engineer-in-Charge, complete all as specified and as directed by the Engineer-in-Charge. | 105 | Each | - | - |
| 3 | Taking down existing door/window shutters of any description, each having an area exceeding 1.00 sqm but not exceeding 2.00 sqm, including removing hinges, screws, bolts and other fixing accessories wherever necessary, carefully dismantling the shutters without causing damage to the adjoining frames or masonry, lowering, collecting and removing the dismantled shutters from the site to the location as directed by the Engineer-in-Charge, complete all as specified and as directed by the Engineer-in-Charge. | 40 | Per leaf | - | - |
| 4 | Taking down existing door/window shutters of any description, each having an area not exceeding 1.00 sqm, including removal of hinges, screws, bolts and other fixing accessories wherever necessary, carefully dismantling the shutters without causing damage to the adjoining frames or masonry, lowering, collecting and transporting the dismantled shutters from the site to the designated store or any other location as directed by the Engineer-in-Charge, complete all as specified and as directed by the Engineer-in-Charge. | 30 | Each | - | - |
| 5 | Resecuring, easing and adjusting existing door/window shutters of any description, each having an area exceeding 1.00 sqm but not exceeding 2.00 sqm, without taking down the shutters, including tightening, realigning and adjusting hinges, and attending to all aluminium fittings such as tower bolts, sliding bolts, hinges and handles, including necessary minor repairs and adjustments to ensure smooth and proper operation of the shutters, complete all as specified and as directed by the Engineer-in-Charge. | 95 | Per leaf | - | - |
| 6 | Supply and fixing of factory-made, single-extruded WPC (Wood Polymer Composite) solid door/window frames (chowkhats), single-rebated, of size 45 mm × 70 mm, manufactured from virgin PVC polymer of K-value 58–60 (Suspension Grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives having a maximum toxicity index of 12 for 100 gms. The frames shall be fabricated with mitred joints, duly bonded with PVC solvent cement and secured with full-body threaded, star-headed stainless steel screws. The frames shall have a minimum density of 850 kg/m³, screw withdrawal strength of 2,200 N (face) and 1,100 N (edge), minimum compressive strength of 58 N/mm², modulus of elasticity of 900 N/mm² and resistance to spread of flame of Class A category. The frames shall be termite/borer-proof, water/moisture-proof and fire-retardant. The frames shall be fixed in position using MS holdfasts/lugs or SS dash fasteners of required diameter and length, including all necessary cutting, drilling, jointing, fixing and making good, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) For WPC solid door/window frames, a minus tolerance of 5 mm in the depth and width of the profile shall be acceptable. Any variation in profile dimensions on the positive side shall also be acceptable; however, no extra payment shall be admissible on this account.
(ii) The cost of MS holdfasts/lugs or SS dash fasteners, including all necessary accessories, shall be deemed to be included in the quoted unit rate. No extra payment shall be made on this account. | 289 | Running Metre | - | - |
| 7 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhat (double Rebated) of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.
Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. | 101 | Running Metre | - | - |
| 8 | Supply and fixing of factory-made, single-extruded WPC (Wood Polymer Composite) solid flush door shutters, 30 mm thick, manufactured from virgin PVC polymer of K-value 58–60 (Suspension Grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives having a maximum toxicity index of 12 for 100 gms. The shutters shall have a minimum density of 650 kg/m³, screw withdrawal strength of 1,800 N (face) and 900 N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity of 850 N/mm² and resistance to spread of flame of Class A category. The shutters shall be termite/borer-proof, water/moisture-proof and fire-retardant. Both faces of the shutters shall be laminated with PVC foil of minimum 14 microns thickness, of approved design, pasted with hot-melt adhesive. The shutters shall be fixed in position with stainless steel butt hinges of required size, using full-body threaded, star-headed, countersunk stainless steel screws, including supply and fixing of the following fittings and accessories:
(a) Stainless Steel (Grade 304) finished butt hinges, 100 mm size, 4 Nos. per leaf, conforming to Table 6 of BIS 12817:2020, BIS marked.
(b) Stainless Steel (Grade 304) finished square tower bolts, 200 mm long, 2 Nos. per leaf, with 12 mm dia bolt, conforming to Table 1 of BIS 15833, BIS marked.
(c) Stainless Steel (Grade 304) finished handles, 200 mm long, 2 Nos. per leaf.
(d) Stainless Steel (Grade 304) finished sliding door bolt, 300 mm long, 1 No. per leaf, with 16 mm dia bolt, conforming to Clause 3(iii) of BIS 15834:2020, BIS marked.
Including all necessary cutting, drilling, fixing, adjustment and making good, complete all as specified and as directed by the Engineer-in-Charge.
Notes for WPC/uPVC Frames/Windows/Shutters:
(i) Test certificate issued by the manufacturer shall be provided by the contractor.
(ii) Embossing with the manufacturer's barcode on each door frame and shutter shall be mandatory.
(iii) The cost of making good all holes and dismantled portions arising from taking down existing frames/shutters, using PCC (1:2:4), Type B-0, with 12.5 mm graded crushed stone aggregate or cement mortar (1:3), as applicable, shall be deemed to be included in the quoted unit rate. No extra payment shall be made on this account.
(iv) The cost of all other connected accessories and fixing materials shall be deemed to be included in the quoted unit rate. No extra payment shall be made on this account. | 162.92 | Square Metre | - | - |
| 9 | Supply and fixing of factory-made, 30 mm thick, solid WPC (Wood Polymer Composite) wire-mesh door shutters of required size, manufactured from virgin PVC resin of K-value 57–60 (Suspension Grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives, using the extrusion process with single-extruded inner WPC foam sheet. The shutters shall have a minimum density of 650 kg/m³, screw withdrawal strength of 2,000 N (face) and 1,100 N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity of 850 N/mm² and resistance to spread of flame of Class A category. The shutters shall be termite/borer-proof, water/moisture-proof and fire-retardant. Both faces of the shutter shall be laminated with PVC foil of minimum 14 microns thickness, of approved design. The panel area of the door, excluding stiles and rails, shall be provided with mosquito mesh and XTN aluminium mesh, fixed together using self-tapping, round-headed screws at suitable intervals. The screws and exposed edges of the mesh shall be covered with feathered PVC edge beading all around. The shutter shall be fixed in position with stainless steel butt hinges, using full-body threaded, star-headed, countersunk stainless steel screws, including taking down and removing the existing shutter and supply and fixing the following fittings and accessories:
(a) Stainless steel finished butt hinges, 100 mm long, 4 Nos. per shutter, including stainless steel screws.
(b) Stainless steel barrel tower bolts of extruded section, 150 mm long, 2 Nos. per shutter, ISI marked.
(c) Stainless steel handles, 125 mm long, 2 Nos. per shutter, ISI marked.
(d) Helical door spring, 300 mm long, 1 No. per shutter.
Including all necessary cutting, drilling, fixing, adjustment, fastening and making good, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) Material test certificates for all items, duly authenticated by the respective manufacturing companies, shall be compulsorily provided by the contractor.
(ii) The cost of stainless steel butt hinges, 100 mm long, 4 Nos. per shutter, stainless steel screws, stainless steel barrel tower bolts, 150 mm long, 2 Nos. per shutter, stainless steel handles, 125 mm long, 2 Nos. per shutter, and helical door spring, 300 mm long, 1 No. per shutter, shall be deemed to be included in the quoted unit rate. No extra payment shall be made on this account.
(iii) The cost of mosquito mesh and XTN aluminium mesh, including their fixing arrangements, screws and PVC edge beading, shall be deemed to be included in the quoted unit rate. No extra payment shall be made on this account. | 72.72 | Square Metre | - | - |
| 10 | M&L Providing and fixing factory made uPVC white colour (sliding, three track) window of area exceeding 1.00 Sqm but not exceeding 2 Sqm each /ventilator made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass and galvanized steel wire mesh cloth 0.56mm nominal dia of wire and average width of aperature and fixed with tinned tacks or galvanised wire staple.
(Note :- 5mm thick toughened Glass and stainless steel wire shall be included in this item nothing shall be paid extra in this account. Net opening will be measured for payment purpose.) | 83.7 | Square Metre | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.06 MB
Tenderdocuments60.pdf
Tender Documents • 1.14 MB
BOQ_897124.xls
BOQ • 1.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .