Repair and maintenance of Circuit House Building at Hamirpur

Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with 1st (First) quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre (Fifty grams per litre) of approved brand and manufacture to give an even shade Old work (one or more coats) (Asian/Nerolac/ICI Dulux) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture (ASAIN/NEROLAC/ICI-DULUX ) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Polishing on wood work with ready mixed wax polish of approved brand and manufacture New work including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade with Two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) (ASAIN/NEROLAC/ICI-DULUX) of approved brand and manufacture complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Structural steel work in single section, (TATA/SAIL Make ) fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In trusses and trussed purlins in building including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing MS BP Sheet 1.66mm to 2.00mm (One point six six to two millimetre) thick of TATA/Sail make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per instruction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetre) thick prelaminated particle board flat pressed three layer or graded wood particle board HDMR conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera Pre-laminated particle board with decorative lamination on both sides (Action Tesa,Century Ply,Green ply,Kit ply make ) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Jal/Jaquar/Parryware/Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass Angle Stop Cock (concealed) of Jaquar (OPP-CHR-15053 PM) with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass bib cock of Short body Jaquar (CON-047KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/ Jaquar/ Finolex /Hindware Make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (Eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 (One) metre long with S.S. triangular plate to Eureopean type W.C. of quality of ESSCO (ALE-547) and make including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme make) flexible pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised iron profile sheets (TATA/SAIL/JSW make) (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percentage) total coated thickness with zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 15mm (Fifteen millimetre) nominal outer dia pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m (One metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Repairs to plaster of thickness 12 mm to 20 mm (Twelve millimetre to twenty millimetre) in patches of area 2.5 sq.metre (Two point five square metre) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground with cement mortar 1:4 (One cement : four fine sand), all complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer (J K White/ Birla White) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.