85809PROVN AND ADDN/ALTN/SPECIAL REPAIRS TO AREA DRAINAGE AT VARIOUS LOCATION IN PUNE STATION UNDER GE (SOUTH) PUNE

Amount

Demolition of Brickwork or stone masonary including all quoins, arches, pillars etc, built in CM or Cement lime mortar complete all as specified and directed.

Demolition of cement concrete in any position, etc un-reinforced complete all as specified and directed by Engineer-in-Charge.

Excavation over areas not exc 1.5m deep and getting out in soft / loose soil complete all as specified and directed.

Excavation over areas not exc 1.5m deep and getting out in hard and dense soil complete all as specified and directed.

Excavation over areas not exc 1.5m deep and getting out in soft / disintegrated rock complete all as specified and directed.

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan and getting out. in hard/dense soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan and getting out in soft/disintegrated rock for foundation etc complete all as specified and directed.

M & L for PCC 1:4:8, type D-2 (using 40 mm graded stone agg) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L for precast PCC block masonry exceeding 10cm width with solid block of grade C-5 and setting in CM (1:6) complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M & L for rendering 15 mm thick on block walling surface in CM (1:4) finished surfaces even and smooth using extra cement complete all as specified and as directed.

M&L for PCC (1:2:4), type B-1, using 20 mm graded stone graded aggregate as in benching to MH and coping etc complete all as specified and as directed.

M&L for PCC (1:2:4), type B2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

M&L for 450mm bore RCC pipes class NP-2 laid and jointed complete with collars all as specified and directed.

M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in RCC perforated cover slab of drain set in CM 1:4 complete all as specified and directed.

M&L for RCC M-25 (20mm graded stone aggregate) (design mix) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below and above ground level) all as specified and directed.

M&L for mild steel TMT bars upto 10mm dia cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 6-8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material exc 1.5 Km but not exceeding 5 Km and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed.

M&L for 100 mm thick cement concrete (1:2:4 ), type B-1, (40mm Graded stone aggregate) finishing cement concrete surface even and smooth using extra cement complete all as specified & directed.

M&L for hardcore of gauge n exc 63mm (broken stone or boulders) deposited spread and levelled in layers in not exc 15 cm thick water and rammed to a true surface complete all as specified and directed.

M&L for framed work such as grills , gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways , railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Material and labour for prepration of new or previously untreated steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint of any tint over and including a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for RCC M-25 (design Mix) (20 mm graded, stone agrregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M 25 (design Mix) (20 MM Graded stone agrregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; inncluding attached pilasters and buttresses complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to latter complete as specified and directed.

M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete as specified and directed

M& L for spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed.

Rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces complete all as specified and directed.

Finishing surfaces of concrete roads, pavements by brooming complete all as specified and directed by Engr-in-Charge.

Three coats of white wash on newly prepared surfaces including preperation on wall etc complete all as specified and directed by Engr-in-Charge.

Forming 12 mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' complete all as specified and directed by Engr-in-Charge.

Forming Conraction (Dummy) joints 65mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed by Engr-in-Charge.

M/s.BAJRANG CONSTRUCTION

Anand Trading Co

United Sales Corporation

M/S V C SHETH

Suma Construction

shah construction

agarwal and company