SPECIAL REPAIR TO TOILETS AND OTHER CONNECTED PATIENTS CARE FACILITY AT MED-II WARD SURG WARD I AND II P/1 ENT WARD/ DEPTT BLDG NO P-80 RADIOLOGY BDLG NO P/6 AND COY OFFICE BLDG NO- P-76 ORS PERSONNAL LINE BLDG NO P/74 AT BASE HOSPITAL UNDER GE (E/M

Amount

Taking down cement plaster brick wall or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. & removing debris out side MoD land complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and including disposal of all debris out side MoD land complete all as specified and as directed.

Demolition of cement oncrete as in floors and pavings not exceeding 15 cm thick including any type of floor finishes etc complete (below or above ground level) & removal of debris out side MoD land complete all as specified and as directed.

M&L for Non skid ceramic tiles7mm to 8mm thick Ist quality ceramic coloured of area exc 0.11 Sqm but nexc 0.18 Sqm (400x400mm) in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x600x8 mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over 10mm thick cement plaster in CM 1:4 and finished the surface of plaster rough complete all as specified and directed.

S&F coloured vitrified ceramic tiles (dark shade/double charged/ultra charged ) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile complete all as specified and as directed.

M&L 25 - 30 mm thick machine cut kota stone flooring jointed and pointed with grey cement slurry mixed with pigments to match the shade including grinding, rubbing and bee wax polishing upto mirror finished (polishing) complete all as specified and directed.

M&L for marble work 20 mm thick using makarana white stone (table rubbed and polished) marble stone as in pattern 10-15 cm wide as in floor in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with Makarana white marble shade complete all as specified and directed.

M&L 20 mm thick screed bedding in cement mortar 1:6 for laying of floor finishes making rough to receive floor finishing etc complete all as specified and directed.

M&L Plain cement concrete 1:5:10 type E-2 using 40mm graded stone coarse aggregate in filling & mass concrete for sunken floorcomplete all as specified and directed.

S&F in repair viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush pipe), connection to trap (leakage proof) etc and make functional complete all as specified and directed.

S&F in repair wash down water closet (Pedestal pattern) using vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern ), complete with & including Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, Plastic water closet seat, white, recessed bottom pattern including seat cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F as in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe using vitreous China Urinal, Half stall type, white with & including waste pipe etc complete all as specified.

S&F in repairs PVC low level white flushing cistern, valveless syphonic action type 10 ltr capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia bend and a pair of mild steel iron brackets of suitable size including making necessary connection to water supply pipe line, complete all as specified and directed.

M&L for applying 10-12 mm thick ready mix mortar on wall surface as per manufacturer instruction complete all as specified and as directed. Make- Birla/JK cement/ACC/Lafarze/Ultratech

M&L for applying 10-12 mm thick ready mix mortar on ceiling surface as per manufacturer instruction complete all as specified and as directed. Make- Birla/JK cement/ACC/Lafarze/Ultratech

M&L 3mm thick wall care putty to wall of new/old plastered surfaces trawelled to an even and smooth surfaces all as specified and as directed.

M&L 3mm thick wall care putty to ceiling old or new plastered surfaces trawelled to an even and smooth surfaces all as specified and as directed.

S&F in repair vitreous chinaware wash hand basin pedestla pattern flat back of size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted and cutting for pinning in ends of brackets in wall etc complete all as specified and directed.

Fixing only as in repair wash hand basin Vitreous China any size including cutting for & pinning in ends of brackets etc complete all as specified and as directed.

M&L for 18 to 20 mm thick of approved shade granite stone (Zed Balck) (superior Quality) slab (table rubbed and polished as in floors, jambs,steps,cooking platform, shelves etc and the like, over creed bed incl pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F as in repair oval type wash hand basin chinaware of 560 x410 mm size, fixed on counter type platform complete all as specified and as directed.

S & F as in repair 32 mm dia waste fittings, brass, chromium plated for wash hand basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F PVC connections 15 mm size with PTMT nuts both ends including PVC washers of length 450mm complete all as specified and as directed.

S & F 32 mm dia waste Pipe, 75 cm long complete all as specified and as directed.

S&F Pillar taps with swan neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Fixing only as in repair pillar tap any type & size to 15mm bore pipe complete.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed.

S &F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair 15mm dia bib tap long body fancy type, screwed down, screwed for iron pipe, cast copper alloy, chromium plated with flange complete all as specified and directed.

S & F as in repair 15 mm bore chromium plated fancy type two way bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Fixing only as in repair bib taps of any description to 15mm bore pipe complete all as specified and as directed.

S&F grating doom 125 mm dia with waste hole of PTMT.(Minimum weight 40gms) complete all as specified and as directed.

S&F in repair 15 mm bore chromium plated fancy type stop cock with long shank and cup (concealed type) complete all as specified and as directed.

S&F in repair stop valve fancy type chromium plated screwed down both ends for high pressure suitable for 15 mm dia iron pipe complete all as specified and as directed.

S&F for CP soap dish complete all as specified and directed.

M & L for hand shower (health faucet) (ABS chromium plated ) with 8mm dia, 1m long flexible tube and wall hook complete all as specified and directed.

S&F for CP paper holder fixing to wall with ss screw compete all as specified and directed.

S&F Brass CP mixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed.

S&F as in repair Chromium plated shower roses with swivel joints, 65mm size, including fixing to steel pipe or union complete all as specified and as directed.

Fixing only in repair CP shower rose 150x150mm with 190mm long shower arm rod all as specified and directed.

Dismantling of rain water /waste drain pipe of any type & dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F as in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) out let dia 75mm complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls using PVC clamp suitable for 110mm bore PVC (SWR) pipe complete all as specified and as directed.

All as per item No 45.00 here-in-before but 150 mm bore laid in trenches.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls using PVC clamp suitable for 75mm bore PVC (SWR) pipe complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends 75mm bore any radius with access door including jointing with solvent cement complete all as spd.

S&F PVC (SWR) bends 110mm bore any radius with access door including jointing with solvent cement complete all as specified and as directed.

All as per item 51.00 here-in-before but 150mm bore.

S&F PVC (SWR) shoe 150mm bore any radius including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm bore with access door including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore with access door including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 75mm bore with access door including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 110mm bore with access door including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) junction double, (double T), equal or unequal 75mm bore with access door including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) junction double, (double T), equal or unequal 110mm bore with access door including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) couplers 75mm bore including jointing with solvent cement complete all as specified.

S&F PVC (SWR) couplers 110mm bore including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) reducers 110X75 mm including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

S&F PVC (SWR) 'S' trap 125x110mm including jointing with solvent cement complete all as specified and as directed. .

S&F PVC (SWR) 'P' trap 125x110mm including jointing with solvent cement complete all as specified and as directed. .

S&F 110mm PVC (SWR) WC connector with lip ring including jointing with solvent cement complete all as specified and as directed.

M&L rendering 10 mm thick in cement mortar 1:3 on brick or stone masonry surface finish fair & even mixed with water proofing compound complete all as specified and directed. (Note: WPC will be measured & paid separately.)

M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces complete.

S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified

Supply only water proofing compound ISI marked.

Taking down chowkats or frame(W/o taking off shutters from the frames) not exceeding 1.50 sqm each complete all as specified and as directed.

All as per item No 72.00 here-in-before but exceeding 1.5 Sqm but not exceeding 4 Sqm complete all as specified and as directed.

Cutting holes in brick walls built in cement morar for inserting hold fast & making good dismanteled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 required depth of embeded portion of holdfast or lugs measured from the face of the jamb into the wall exc half brick but n.exc full brick complete.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door chowkhat of size 65X100 mm comprising of virgin pvc polymer K velue 58-60 (Suspemtion Grade ), Clcium carbonate and Natural fibers (Wood power/rice husk/weat husk) and non toxic additives (Meximum toxicity index of 12 for 100 grm) fabricated with miter joint after applying PVC Solvent cement and screwed with full body theaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawl strength of 2200 N (Face) & 1100 N (Edge), mimimum compressive strength of 58 N/MM Sqr and resistance to electricity 900 N/MM sqr and registance to spread of frame of class A Category with property of being termite/borer proof, water / moisture proof and fire retaedent and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid coloured Decorative flush shutter of 30 mm thick size comprising of virgin polymer of K velue 58-60 (Suspemtion Grade ), Clcium carbonate and Natural fibers (Wood power/rice husk/weat husk) and non toxic additives (Meximum toxicity index of 12 for 100 grm) having minimum density of 650 Kg/Cum and screw withdrawal strangth 50 N / mm modulus of elasticity 850 N/mm sqr and resistence to spread of frame of class A category with property of being termite/ borer proof, water / moisture proof and fire retardant and fixing with stainless stell butt hinges of required size with necessary full body threaded star headed counter sunt SS Screw, fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Taking down & refixing in the same opening shutters of any description exceeding 1.0 Sq. m but not exec. 2 Sq. m each all as specified & directed.

S&F powder coated aluminium of various section as required for frame of windown/ventilators etc with one or more rebates including jointing cleats for fixing etcetc. all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2Nos.) suitable handle (1 No) complete all as specified

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

S&F MS holdfast, wall ties and similar articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and as directed..

S&F 100mm size stainless steel butt hinges fixed with stainless steel screw complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

S&F 3mm thick glass pin headed type ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and as directed.

M&L Stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples or wooden/ Aluminium beadding complete all as specified and as directed.

S&F Sheet glass, ordinary quality 4mm thick and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F in repair 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed.

All as per srl item No 88.00 here-in-before but 20 mm bore.

All as per item No 88.00 here-in-before but 25 mm bore.

S&F in repair of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including chasing, cutting and making good to make pipe concealed complete all as specified and directed.

S&F 20 mm bore Brass Elbow for fixing of CPVC pipe complete all as specified and as directed.

S&F Brass Elbow (3/4 X ½) mm for fixing of CPVC pipe complete all as specified and as directed.

S&F 20 mm Brass Tee for fixing of CPVC pipe complete all as specified and as directed.

S&F 20 mm Male Brass threaded adaptor (MTA/ MBTA) ) for fixing of CPVC pipe complete all as specified and as directed.

M&L for applying 15 mm thick ready mix mortar on wall surface as per manufacturer instruction complete all as specified and as directed. Make- Birla/JK cement/ACC/Lafarze/Ultratech (Note : Water proofing compound shall be measured and paid separately).

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4(1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2(1 cement 1/2 coarse sand:2 colour marble stone chipping 10mm nominal size)including of using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed

Complete removal of exisiting water proofing treatment of roof cleaning with wire brushes etc incl demolistion of Mud phuska in roofs, any thickness, including PCC/plastering and leeping/PCC padding complete all as specified and directed.

M&L for providing plain cement concrete, type B-0, 1:2:4 (using 12.5 mm graded stone agg) as in PCC sub base, roof padding, Gola, etc including cleaning the surface by wire brushing complete all as specified and directed.

M & L for water proofing treatment with five layered 4mm thick APP (Atatic poly propylele) modified bituminous membrane re-inforced with non woven polyster mat of weight 180 gms/sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythlene applied by thermo fusion using LPG torch on the bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 kg / sqm over roof and finishing the treatment with one coat of bitumen of grade 85/25 @ 1.2 Kg per Sqm and two coat of aluminium paint over APP membrane. ( An overlap of 100mm & 150mm shall be provided on sides and ends respectively) Notes :-(i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer APP membrane. (iii) The quoted rate incluide one coat of bitumen of grade 85/25 @ 1.2 Kg per Sqm & two coat of Aluminium paint over APP membrane. (iv) The work shall be carried out by authorized applicator of manufacturer as approved by GE.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing etc. capacity of tank 500 ltr but n.exc 1000 ltr.

All as item 101.00 here-in-before but exc 1000 & not exceeding 2000 ltr capacity complete all as specified and as directed.

Cutting grooves 75 mm wide & 65 mm deep in brick wall/ RCC surfaces at any location shaping horizntal face with mechanical cutter and grooves filled with PCC 1:2:4 type B-0 (using 12.5 mm gradded stone aggregate) mixed with chemical compound SUPER LATEX OR DR FIXIT OF PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD mixed with proportion 200 ml per 50 kgs cement as per manufactures instruction all as specified & directed.

Demolition of brick work built in cement mortar of any description and rincluding disposal of all debris and complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

All as per item No 105.00 here-in-before but except bricks.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Dismantling Asbestos cement corrugated or semi corrugated sheets in roof covering complete all as specified and as directed by Engg-in-Charge.

All as item 108.00 here-in-before but galvalume sheet.

Supply and fixing in position galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified high tensile alloy steel trap sheet having 55 MPA yeild strength and zinc (galvanized ) + Aluminum combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes. RMR 1040 profile width 1125 mm complete all as specified & directed.

All as per item No 110.00 above but plain sheet as in ridge/valley gutter

S&F steel work in tublar column, prline,rafter etc using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication primer

S&F mild steel plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/ connections etc. including one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication primer complete.

Preparing surface of steel and iron work, new or old, of any description and girth, not otherwise described, and treated small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, with tar or coal tar black paint etc .

M&L for taking down loose concrete from RCC column, beam, slab & the like, roughening & cleaning concrete surface with steel wire brush, derusting the corroded reinforcement by using antirust chemical of fosroc or equivalent after then guniting (spreyed concrete) on damaged RCC surfaces of columns, slabs, beams etc with concrete mix 1:1.2:2.4 (cement : well graded coarse sand confirming to zone II: 8 mm down well graded coarse aggregate retained on 2.36 mm sieve) added with fibrilated Polypropene Fibres (125 gm per bag of cement) and chemical admixer (Polymer Monobond 5% of wt of cement) min thickness of 60 mm incl high tensile welded wire mesh of 5 mm dia @ 50 mm spacing properly anchored with ext surfaces, finished the surface fair & even by appling a coat of cement plaster 5mm thick using CM 1:3 complete as per the reqmt/ recommenmdations of Enge-in-Charge

Excavating in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundations of walls and not exceeding 10 Sqm on plan complete all as specified and as directed.

Returning and filling in soil incl levelling, watering and well rammingin layers n. exc 25cm in fdn trenches.

M&L for removing excavated soil to a distance Not exc 500 mtr and depositing where directed complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed stoneware) set in cement mortar 150 mm internal dia of pipe complete all as specified and directed.

S&F salt glazed stone ware drain pipes laid in trenches and jointed internal dia of pipe 150 mm grade 'A' complete all as specified and directed.

S&F salt glazed stone ware drain pipes laid in trenches and jointed internal dia of pipe 200 mm grade 'A' complete all as specified and directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and haunching against the sides of pipes after they are laid and tested in bores of pipe 150 mm dia complete all as specified and directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and haunching against the sides of pipes after they are laid and tested in bores of pipe 200 mm dia complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth omplete all as specified and directed.

M&L RCC nominal mix 1:2:4 type B-1 (using 20 mm graded crushed aggregate only) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of Old RCC complete all as specified.

Use & waste Formwork to soffits of suspended slabs such as roof slabs,flat, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished complete.

Use & waste formwork to edges of concrete flats, fair finished, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete.

M&L high Yield Strength Deformed TMT bars Fe-500 grade 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and incuding mild steel wire (annealed) not less than 0.9 mm dia.

Supply and laying sand (30 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed.

M&L for designer, glass moulded precast concrete interlocking paver block shape, size and colour as approved confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made with grey cement and pigment including sealing the ends using PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) complete all as specified and directed.

M&L for 75 mm PCC 1:3:6 type C-1 (20mm graded stone agg) as in plinth protection/hard standing and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Oil Bound Distemper over a coat of chalk whiting on plastered and other surfaces with alkali resistant priming pain complete all as specified.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of Oil Bound Distemper over a coat of chalk whiting & a coat of primer on plastered and other surfaces with alkali resistant priming pain complete all as specified.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as in beam for OHT using Fe 410 -W (Gde-E- 250) quality complete.

M&L for applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc all specified on external surfaces.

Material & Labour for providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc complete all as specified and directed..

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc.omplete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting and unloading the same at C & D Waste Management Site near Jahangir Puri Safai Karmchari Quarters including weighing at plant etc.Weighing and unloading at the plant shall be as per procedures/rules of the Plant Management. The rates are inclusive of all operations, labours, leads and lifts from site of work to the C & D Waste plant. The processing fee of C & D Management at prescribed rates will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed.

Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed.

Disconnecting and taking out the old unservicable sheet metal enclosure for MCB DB SPN/TPN (Any type) 8 way including old unserviceable wooden board and making good the disturbed surface of wall complete all as specified.

M&L point wiring for modular switches with 1.5 sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including concealed, rigid non-metallic PVC Conduit of minimum 25mm dia or as per site requirement with all fittings, including cadmium plated screws as per IS, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for One light/fan/bell point controlled by one No, 6 Amp, one way switch/bell push complete all as specified and as directed.

All as per item No. 145.00 here in before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed.

All as per item No. 145.00 here in before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed.

All as per item No.145.00 here in before but point wiring of copper cable multi stranded 4 Sqmm size for 25 Amps independent Industrial socket board with 4 Sqmm of earth conductor.

S&F in repair sub main wiring with 2 runs of 6 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- (i) Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length (ii) Cost of chasing and making good are included in quoted rate).

S&F in repair Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed.

S&F in repair modular switch, 1 way, 6 amp, 1 Module, complete all as specified and as directed.

S&F in repair of Modular white cover plate with frame , 2 module.

S&F in repair of Modular white cover plate with frame , 3 Module

S&F in repair of Modular white cover plate with frame ,4Module

S&F in repair of Modular white cover plate with frame , 6 Module

S&F in repair of Modular white cover plate with frame , 8 Module square type.

S&F in repair after taking down rusted sunkun box by modular metal flush board 2 of Module

S&F in repair after taking down rusted sunkun box by modular metal flush board 3 Module.

S&F in repair after taking down rusted sunkun box by modular metal flush board 4 Module.

S&F in repair after taking down rusted sunkun box by modular metal flush board 6 Module.

S&F in repair after taking down rusted sunkun box by modular metal flush board 8 Module.

S&F in repair Sheet Metal Enclosure with a two pin and earth plug and socket complete with one single pole MCB 25 amps complete all as specified.

S&F in repair of energy efficient Surface/Wall Mounted 20W integrated LED batten 4 feet Fitting with polycarbonate housing. Total system Lumen of 25W to 22W LED should be 2200 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp LED Lamp Efficacy>130 Lm/W with Average life of 50000 Burning hours. Complete with all accessories as required with connections. complete all as specified and directed.

S&F in repair energy efficient LED batten tube light, Surface/Wall Mounted 9W to 10W integrated LED 2 feet Fitting with polycarbonate housing. Total system Lumen of 9W Led should be 990 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp, LED Lamp Efficacy>130 Lm/W with Average life of 50000 Burning hours. Complete with all accessories as required with connections.

S&F in repair energy efficient LED batten tube light, Surface/Wall Mounted 5W to 9W integrated LED 1 feet Fitting with polycarbonate housing. Total system Lumen of 5W Led should be 990 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp, LED Lamp Efficacy>130 Lm/W with Average life of 50000 Burning hours. Complete with all accessories as required with connections.

S&F in renewal Sheet Metal Enclosure DB 12 way with 200 amps rated bus bar complete all as specified.

S&F in renewal Sheet Metal Enclosure DB 8 way with 200 amps rated bus bar complete all as specified.

S & F in repair MCB SP, 240 Volts, 10 Amps complete all as specified and directed.

S & F in repair MCB SP, 240 Volts, 16 Amps complete all as specified and directed.

S & F in repair MCB DP, 240 Volts, 40 Amps complete all as specified and directed.

Dismantling of existing exhaust fan hole and repair of hole on brick/stone masonary wall and grouting of bolts of suitable size and connection with 1.5 sqmm copper wire from ceiling rose to fan all as specified and directed.

S& F exhaust fan 300 mm sweep,RPM 1400, 240 Volt Heavy duty (Iron), connection with flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. Note :- Old unserveciable exhaust fan will be deposited to MES store yard.

Supply and Fixing in repair of five star rated Geysers of cap. 50 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cutoff , including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and directed. Note :- Old unserveciable Geyser will be deposited to MES store yard.

S & F in repair Earthing complete with galvanised GI earth plate eletrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate n.less than 1.5mtr below normal.GL surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Bldg at another end GI earth wire encased in and including 15mm dia GI light grade pipe through upper end of earth plate upto main DB of bldg with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate MS funnel with wire mesh fixed on water pipe and Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150C/c with both ways complete with lifting handle all as shown in electrical plate no 5 of SSR of part-I (1991) complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sqmm 4 core with PVC Conduit of minimum 25/32mm dia nominal cross section in service connections complete all as specified and directed by Engr-in-charge.

S&F in repair LED building security Light fitting 60 watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, including pre fabricated GI bracket of suitable size with clamps nuts and bolds & connecting with three core copper wire after taking down old light fitting of any description complete.

Shiv Shankar Nirman Co.

VED PRAKASH ARORA