Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹21.2 L+₹25,569.80 (1.22%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹24.0 L+₹3.0 L (14.3%)Rejected-AOC B 22 152 STREET NO 1 14 BABA FARID NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-AOC L3 | |
| 4 | L4₹24.3 L+₹3.3 L (15.9%)Rejected-AOC 50A 7B 5C UMARPUR NIWA DHOOMANGANJ PRAYAGRAJ UP | PRAYAGRAJ | UTTAR PRADESH | 211011 | L4 | Rejected-AOC L4 |
Tender Value
₹24.8 L
EMD Value
₹49,600
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (P) Kanasar
Garrison Engineer (P) Kanasar Military Engineer Sevices Kanasar Bikaner (Raj) 334001
PROVN OF ESCORT WAITING ROOM WITH TOILET AT 27 FAD KANASAR.
2022_MES_546400_2
CA NO. GE (P) KNS/Token No. 15/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Kanasar
Contractor shall be enlisted with MES in E class and above and category a(i) subject to satisfactory remarks wrt performance in respect of works in hand as reflected in WLR contractor not enlisted with MES should meet the enlistment criteria of E
9 documents required · 9 mandatory
₹500
Yes
GE (P) Kanasar
₹49,600
Yes
15 Mar 2023
7 Oct 2022
9 Nov 2022
7 Oct 2022
7 Nov 2022
24 Oct 2022
Amount
Surface dressing n exc 15 cm deep in soft/loose soil complete, all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, pipe, cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil,complete, all as specified and directed.
Returning, filling in soft / loose soil , including spreading, levelling, watering and well ramming in layers not exc 25 cm complete, all as specified and directed.
Removing excavated material soil n exc. 50m and depositing where directed at a level n exc. 1.5 m complete, all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregates as in foundation, filling and mass concrete, complete, all as specified and directed.
M&L for RCC Design Mix M-25 ( using 20mm graded stone aggreagtes ) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete, all as specified and directed.
M&L for RCC Design Mix M-25 ( using 20mm graded stone aggreagtes ), as in Columns, pillars, piers, posts and struts etc, complete, all as specified and directed.
M&L for RCC Design Mix M-25 ( using 20mm graded stone aggreagtes ), as in Beams, cantilevers, bressummers, lintels over 1.5m span etc, complete, all as specified and directed.
M&L for RCC Design Mix M-25 ( using 20mm graded stone aggreagtes ), as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete, all as specified and directed.
M&L for RCC Design Mix M-25 ( using 20mm graded stone aggreagtes ), as in Chajjas , complete, all as specified and directed.
M & L for Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte, fair finished flat surfaces.
M & L for use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal surfaces, rough finished, complete, all as specified and directed.
M &L for use and waste Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. rough finished flat surfaces , complete, all as specified and directed.
M&L for use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc, rough finished flat surfaces , complete,all as specified and directed.
M & L for use and waste Formwork to chullah hoods, cha?jjas, troughs and similar items in?cluding edges, etc, rough finished flat surfaces complete all as specified and directed.
M & L for use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished surfaces, complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
S&F Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for Brickwork with Fly ash modular bricks straight or curved on plain exc 6 mtr mean radius in cement mortar 1:6 complete, all as specified and directed.
M&L Brickwork with Fly ash modular bricks straight or curved on plain to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M&L 40 mm thick Damp proof PCC 1:2:4 type B0 ( using 12.5 mm graded stone aggregate ) course to horizontal or vertical surfaces including necessary formwork. Complete , all as specified & directed.
M&L Hardcore of gauge n exc. 63 mm, of broken stone or boulders deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface , complete all as specified and directed.
M&L for 75 mm thick palin cement concrete 1:3:6 type C2 ( using 40mm graded stone aggregate ) as in sub base finshed even & fair, complete all as specified and directed.
M&L for 25mm thick plain cement concrete 1:2:4 type B-O ( using 12.5mm graded stone aggregate ) as in floor finshed even & smooth with out using extra cement, complete all as specified and directed.
M&L for Vitrified Ceramic tiles dark shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured tile to match complete all as specified and directed. Note :- Screed bed shall be measured and paid separately.
M&L for Vitrified Ceramic tiles dark shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in vertical surface such as skirtings, dado etc set and jointed in neat cement slurry and pointed in white or coloured tile to match complete all as specified and directed. Note :- Backing coat shall be measured and paid separately.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, specified and directed. Note :- Screed bed shall be measured and paid separately.
M&L for Glazed coloured ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. Note :- Backing coat shall be measured and paid separetly.Note :- Backing coat shall be measured and paid separately
M&L for 15 mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar (1:4) on brick or concrete surface for fixing of tiles as in dado /skirting , finsihed even & fair ,complete all as specified and directed.
S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 200mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed.
S&F Anodised aluminium frame for doors windows, ventilators including joining cleat for fixing etc and glazing cleat for fixing glass etc, including powder coating (Minimum thicknesss of powder coating 50 micron) complete all as specified and directed.
S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door hinges anodised aluminium snap beading screws tower bolt, locking arrangement etc , including Powder coating of any colour (Thickness or powder coating not less than 50 micron) ,complete, all as specified and directed.
S&F powder coated Anodised aluminium window and ventilator shutters sliding type without sash bars, aluminium sections weighning 0.55 Kg/m including necessary joining cleats glazings clips, rubber packing, anodised aluminium sanp beading, screws anodised aluminium fittings such as suitable handle (1No), including Powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified and directed.
S&F aluminum (extuded section) body door closer hydraulically regulated designation No 3 universal type, suitable fo door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg. Complete all as specified and as diected.
S & F 5.50 mm thick sheet glass, Sheet glass, ordinary quality and glazing with glazing cleats and reubber gasket to aluminium window / ventilatror in square n exc 0.5 sq. m in each pane , with and including solar control fim 25 micron reflective type sticked to glass panes as per manufcaturer instructions, reflective film with 25 micron in squares complete, all as specified and directed.
S & F 6.30 mm thick sheet glass, Sheet glass, ordinary quality and glazing with glazing cleats and reubber gasket to aluminium door in square exc 0.5 sq. m in each pane , with and including solar control fim 25 micron reflective type sticked to glass panes as per manufcaturer instructions, reflective film with 25 micron in squares complete, all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples , complete all as specified and directed.
S&F for brass mortice night latch, size 100 mm, 4 lever complete all as specified and directed.
S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed (ISI Marked) complete all as specified and directed.
S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm (ISI Marked) complete all as specified and directed.
S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.
M&L for 15 mm thick plastering on wall concrete surfaces in cm (1:6) even and smooth w/o using extra cement (Internal wall) complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick wall or concrete surfaces in cement mortar 1:4, finished even and smooth w/o using extra cement, complete all as specified and directed.
M&L for rendering 5mm thick on fair faces of concrete surfaces of ceiling in cement mortar 1:3, finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying two coats of Oil Bound distamper paints over a coat of alkaline resisitant primer, complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for prepartion of new plastered surface ofceiling and applying three coats of white washing, complete all as specified and directed.
S&F 15mm bore galvanised steel tube medium grade with all fittings fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.
S&F 20mm bore galvanised steel tube medium grade with all fittings fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.
S & F 500 ltr capcity rotational moulded polyethylne water storage tanks(cylindrical vertical with closed top) duly provided with necessay fittings/fixtures for connecting inlet, outlet, washout and overflow pipes, noisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20 mm bore and fixed in position, complete all as specified and directed.
S&F 20mm bore Gun metal, gate valve with iron wheel head, screwed both end for iron pipe, complete all as specified and directed.
S&F 15mm fancy type bib taps Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed, complete all as specified and directed.
S & F 15mm Stop valves, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
S&F 15mm bore pillar taps fancy type with capstan heads, chromium plated, srewed down high pressure, with or without lettered `Hot' or `Cold' with long srewed shanks and fly-nuts, screwed for iron pipe and fixed in 15 mm bore complete all as specified and directed.
S&F PVC (SWR) multi floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and directed.
S& F 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S& F 110mm bore PVC (SWR ) pipe, single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.
S&F 110mm bore PVC ( SWR ) bend radius complete all as specified and directed.
S&F 110mm bore PVC ( SWR ) junction single ( single T ) equal or unequal complete all as specified and directed.
S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete complete all as specified and directed.
S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F Vitreous China wash down water closet pan (Pedestal pattern) white incl fixing bolts, seat cover, flush pipe complete all as specified & directed.
S&F Vitreous China wash hand basin, white, flat back, size 630x400mm including CI brackets and 32 mm bore 750mm long PVC waste pipe & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed.
S&F 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets etc complete all as specified & directed.
S& F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete, all as specified and directed.
M & L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection/footpath even and smooth without using extra cement.complete all as specified and directed.
M&L for 15 mm thick screed bedding in CM 1:4 on fair faces of brick work or concrete surface mixed with water proofing compound and finished the surface even and smooth without using extra cement complete all as specified and directed. (Water proofing compound will be paid separately).complete all as specified and directed.
M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 and laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.
M&L for applying one coat of solar reflective paint over APP membrane complete as specified and as directed complete all as specified and directed.
Supply only integral water proofing compound as per manufacture instruction complete all as specified and directed.
S&F 19/20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.
S&F stainless steel pipe of 50mm dia of grade 304 ( ASTM-UNS) for railing complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2,( using 40mm graded stone aggregate ) as in sub base finish even & fair, complete, all as specified and directed.
M & L for fine aggregate ( sand) cushion / bedding below Paver block complete, all as specified and directed.
M&L for Machine pressed precast coloured designer polished (reflecting type) interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement & pigment, complete all as specified and directed. Note:- Sand cushioning / bedding shall be measured & paid separtely.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate ) on edge of interlocking path complete all as specified & as directed.
SEWAGE DISPOSAL
Excavation over areas, not exceeding 1.5m deep and and getting out in soft / loose soil, complete, all as specified & directed
Excavation over areas, exceeding 1.5m deep and not exceeding 3.00m deep getting out in soft / loose soil, complete, all as specified & directed
Excavation over areas, exceeding 3.00m deep and not exceeding 4.50m deep getting out in soft / loose soil, complete, all as specified & directed
Excavation over areas, exceeding 4.50 m deep and not exceeding 6.00 m deep , getting out in soft / loose soil, complete, all as specified & directed.
M&L for PCC 1:4:8 type D2 ( using 40mm graded stone aggregates) as in foundation filling and mass concrete, complete, all as specified & directed.
M&L for PCC 1:3:6 type C2 ( using 40mm graded stone aggregates) as in foundations, filling and mass etc complete all as specified & directed. ( Manholes)
M&L Brick work in burnt clay sewer bricks straight or curved on plan exc 6m mean radius for manholes/ Septic Tank /Soakage well etc in sewar works in cement mortar 1:4, complete, all as specified & directed.
M&L Brick work with sub-class 'B' bricks, in one brick thick honey comb walling built in CM 1:4, complete, all as specified & directed.
M&L RCC ( nominal mix) 1:2:4 type B1 ( using 20mm graded stone aggregate ) as in bands, complete, all as specified & directed. Note :- Reinforcement and formwork shall measured and paid separately
M&L RCC ( nominal mix ) 1:2:4 Type B1, (using 20mm graded stone aggregates ) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete, all as specified & directed. Note :- Reinforcement and formwork shall measured and paid separately.
M&L for loose filling with broken Brick bats of guage 80 to 150mm in soakage well, all as directed.
S&F 150mm internal diameter Sail-glazed stoneware drain pipes grade A laid in trenches and jointed as in CM 1:1 and tested complete all as specified and directed.
M&L for Cement Concrete 1:3:6 type D2 ( Using 40mm graded stone aggregates ) bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; bore of pipe 150mm, complete, all as specified & directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate ) as in bed, bends,, coping, benching etc including slighting moulded or chamfered edges complete all as specified & as directed.
M&L for Precast cement concrete 1:2:4 type B1( using 20mm graded stone aggregate ) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces as in manhole cover for set in CM 1:6 complete, all as specified & directed.
M&L Mild Steel work Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.
Extra for forming fair finished to drain or channels up to 30cm inner girth in cement concrete using extra cement including necessary forms / moulds etc complete all as specified.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete, all as specified & directed. (for Manhole, etc)
S& F precast RCC septic tank of inner dia 1.2 m and 2.45 m long, NP-2 class of capacity 4000 litre, 50 mm thick, M-30 grade complete all as specified and as directed by Engr-in Charge. Note :-The quoted rate includes the following :- (i) 100 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in bed of Septic tank. (ii) Excavation in trenches n.exc 1.5 wide and n.exc 1.5m deep in soft / loose soil. (iii) Removal of surplus soil to a distance 50m (iv) Returning & filling in soil
INTERNAL ELECTRICFICATION
Material and labour for point wiring complete with 1.5 sqmm (nominal area) PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in PVC casing caping of suitable size complete with sunk pressed steel terminal box for fitting/mounting switches/ sockets regulators etc with bakelite sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connecting to earth dolly for one light/fan point controlled by one switch complete all as specified and directed.
Ditto all as per ietm No. 106.00 above , but for 3 pin socket out let 15 Amps independent with cable 2.5 sqmm unsheathed stranded 1100 V grade complete with 1.5 sqmm PVC insulated earth wire and connecting to earth dolly all as specified.
Supply and fix switch piano type white colour flush 5/6 Amps single pole one way complete all as specified.
Supply and fix switch socket combination multi purpose white colour 5 pin 5 Amp flush type complete all as specified.
Supply and fix switch socket combination multi purpose white colour 3 pin 15 Amp and 3 pin 5 Amps flush type multi purpose 2 in one complete all as specified.
Supply and fix lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings.
Supply and fix ceiling rose, 3 phase polycarbonate body all as directed by Engineer-in-charge.
Supply and fix sheet metal enclosure powder coated for MCB DB SPN 8 way with Din rail and busbar complete all as specified.
Supply and fix MCB SP 250 V 6 Amps to 32 Amps 10 KA rating ISI marked and connecting complete all as specified.
Supply and fix MCB SPN 250 V 6 Amps to 32 Amps 10 KA rating ISI marked and connecting complete all as specified.
Supply only ceiling fan of 1200 mm sweep BEE approved 5 star rating, permanent magnet bushless DC motor, ISI marked single phase, AC supply 240 Volt, 50 Hz, No of blades 3, rated power 35 watt, rated current 0.16 Amps, power factor 0.98, 370 RPM including canopies, down rod, bouble ball bearing including all accessories all as directed by Engineer-in-charge
Supply and fix LED Bulb of capacity 7 watt all as specified and directed.
Supply & Fixing LED Batten 20 watt wall mounted batten with aluminium housing & integratewd eletronic driver Make- Havells model Cat No -NDURALINEARNEOBS20WLED865SPCWH or equivelent model in Bajaj/Crompton/ Philips
Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece all as specified and directed.
Supply and fix exhaust fan steel body AC single phase, 230 V of size 300 mm sweep with blades and frames and louvers.
Supply and installed Desert Cooler electric driven (single phase)having copper winding exhaust fan type of 450 mm sweep fan motor with 3 leaf aluminum blade 1400 RPM and power consumption of 350 Watts(Make of mortar -crompton greaves or Bajaj or Usha or Havells ), nominal airflow capacity of 6000 cum per hour including PVC submersible pump copper winding complete single phase 230 volts , ISI marked Galvanized non corrosive steel body(minimum 20 gauge) and body dimension (1150mm X750mmX750mm) ,front grill rectangular shape and three side with opening steel shutter with wooden chips pad and water storage tank capacity 90 ltr and three step rotary type controller including PVC pipe fitting , including PVC float valve 15 mm size with ON/OFF switch and all as specified and directed by Engr-in -charge.
Earthing complete with galvanisedsteel earth plate electrode of size 60 cm×60 cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including galvanised iron earth lead wire 4.0 mm dia by means of GI bolts/nuts/washers, protected by 15 mm bore GI medium grade pipe.Earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, RCC cover & frame, PCC (1:3:6) type C-2 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation and earth work , all as specified and shown in electrical plate No 3 of MES Schedule Part-I.
Notes FOR Item No 122.00 :- PCC Chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting maner.
The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.
On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
EXTERNAL WATER SUPPLY
M & L for tapping of water supply line from 20 mm dia GI line including socket/ clamp/ T all as directed by Engineer-in-charge.
Supply & Fixing galvanised tubing of 20 mm bore medium grade with all fittings in trenches complete as per IS-1239 Part-II all as specified and dircted.
S&F gun metal gate valve with iron wheel head screwed both end ISI marked complete all as specified of 20 mm bore complete all as specified and directed.
EATERNAL ELECTRICFICATION
Supply and Laying Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armoured cables (heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade and connecting and testing in trenches, under floors/ roads or on walls of following sizes (Note 1 : Earth work, excavation , cable cover, sand cushioning, shall be measured & paid separately under respective item of schedule
10 Sq.mm, 4 core cable
Supply and fixing or laying galvanised steel tubing light grade (ISI marked) for protection of underground cable on poles/walls under road crossing etc of following sizes including dismantling and taking down existing pipe
20 mm bore
M&L for drilling hole under road for laying of U/G Cable through pipe of size upto 50 mm bore complete as specified and directed at site.
Supply and fix MCB of capacity 63 Amp to be fix in existing electric panel all as specified and directed by Engineer-in-charge.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in any type of soil for laying of cable, pole foundation, stay, laying of pipe etc complete all as specified and directed.
M&L for bricks for protection cover to under ground cable (with old size sub class 'B' bricks) laid flat abutting each other with width of protection being equal to length of brick. The gap between should not exceed 10 mm as directed by Engineer-in-Charge.
M & L for Sand cushioning (using local tibba sand) for underground cable 8 cm before laying the cable and 15 cm after laying and stretching the cable complete all as specified and as directed. Note :- Punned thickness of 18 cm shall be considered for measurement purpose complete all as specified and directed.
GS BUILDERS AND ENGINEERS
HARPREET SINGH CONTRACTOR
SS CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .