NIT No. 14 (22-23) Item No. 8

Supply of PVC insulated PVC sheathed, copper conductor (flexible) flat cable, size 3 core x 6 Sq mm ,1100 Volts, conforming to IS 694. Make: - Havells/Finolex/Polycab/ Any DJB approved make

Supply of LT power Aluminum cable, solid, XLPE, insulated PVC armoured 650/1100 V-grade as per IS 7908 (Part-I) 1988 size 3.5 x 25 Sq mm. Make: - Havells/Gloster/Polycab/ Any DJB approved make

Supply of 80mm dia. B class GI pipe length 3 Mtr. With duly Welded and threaded flange in both sides, complete with cutting of flange for cable and welded support in both flanges as per site requirement. Make: - Jindal/ Parkash/ Surya/Tata/Jindal Hisar/Jindal Ghaziabad.

Supply of G.I. tail piece medium class of 0.5 mtrs long including one end flanged and another end threaded of 80mm as per site requirement.

Supply of 80mm dia. GI Bend with both side flanges duly welded and threaded as per site requirement.

Supply of M.S. Clamp of MS strip duly hole for holding the pipe of 80mm dia. with nut bolts and washer.

Supply of M.S. Bore cover made out of MS plate suitable for 10"/12" dia. bore complete with suitable hole for passing the 80mm dia. GI Pipe

Supply of 80 mm C.I. double flanged non rising spindle sluice valve P.N 1.0 IS:14 sub, CI body / wedge / bronze ring / S.S 410 shaft construction & S.S. IS: 6603 Gr. 12 CR 12 CISI marked manual operation DJB SOR 2022 Item No. 4.7.4. Make: - Kirloskar/ IVC/ Any DJB approved make

Supply of 80 mm CI double flanged swing type non return valve as per IS:5312 PN 1.0 CI body door / bronze to rubber ring / SS 410 twin pin DJB SOR 2022 Item No. 4.9.4. Make: - Kirloskar/ IVC/ Any DJB approved make

Supply of Nut Bolts, Washer of good quality as per requirement

Supply of electrical dozing pump (4lph, 5.5 kg/cm, supply chemical grade tank of 100ltrs with NRV, Foot Valve with NRV, Injector Valve and tube (pipe) etc Make:- Clormax /Milton Roy

Fabrication/ Supply of venturi assembly 80 mm dia. with complete accessories as required at site.

Workmanship Charges for lowering the submersible pump set one no. in new bore well, Fixing/Erection/Installation of E&M equipment, accessories, testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e., eccentric taper, rubber gasket, necessary reinforcement and vibration isolation arrangement, etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions. The tube well will be commissioned on automation mode and timing to be set as per direction of Engineer-inCharge. The all-sundry items which are useful & necessary for operation of tube well in automation mode shall be deemed to have been included, whether such items are especially in specification or not. (Deep well submersible pump set, KitKat, RCCB, insulating mat, Dosing pump and LED Lights provided by the department)

Gupta Brothers